journal article·2024-02

Investigation on the microstructure evolution and mechanical properties of electromagnetic rail material in a launch environment

Kongwei Wu, Weichao Wu, Aigang Pan, Chang Guo, Fei Cui, Xiaojun Yang, Guanyu Yang

Publisher page

Abstract

The failure issue of electromagnetic railgun rails is a widely researched problem, but effective research methods are lacking in studying the microstructure of rail materials. The high current and high strain rate tensile (HCHST) testing platform was designed to simulate the high current density and high strain rate deformation service conditions of pure copper rails used in electromagnetic guns. The microstructural and mechanical properties of commercially pure copper were analyzed using TEM and EBSD under high current density (2680 A/mm 2) and various high strain rates ( ε ̇ = 3404 s − 1 , ε ̇ = 6808 s − 1 )using the HCHST test platform. The obtained results were then compared with those obtained from the as-received state and the quasi-static current-assisted tensile (QCAT) test. The findings indicate that the deformation mechanism of pure copper specimen under HCHST is similar to that of QCAT, where dislocation and slip are the main mechanisms. However, distinct differences in microstructure were observed. Specifically, a significant number of dislocation walls were present in the grains under QCAT, whereas numerous dislocation cells were formed in the grains under HCHST. In the high-current density environment of 2680 A/mm 2 , as the strain rate increased, the number of dislocation cells increased while their size decreased. The grains became extremely refined, and the KAM value also increased. Furthermore, the Vickers hardness of pure copper significantly improved after undergoing the HCHST. Based on the experimental findings, it was observed that during the service process of the pure copper rail in electromagnetic railguns (under the influence of high current density and high strain rate deformation), the surface of the rail material experienced significant dislocation entanglement. This resulted in a significant increase in the strength and hardness of the surface of the rail with high strain rate deformation. However, the uneven distribution of strength and hardness throughout the surface layer of the rail eventually made it more susceptible to deformation and failure.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Launch and Propulsion Technology · Electromagnetic Effects on Materials · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Thinking and study of electromagnetic launch technology10.1109/TPS.2017.2705979 ↗
2. Research progress on advanced rail materials for electromagnetic railgun technology10.1016/j.dt.2020.03.014 ↗
3. Numerical simulation of interior ballistic process of railgun based on the multi-field coupled model10.1016/j.dt.2015.12.008 ↗
4. A new finite-element method to deal with motion problem of electromagnetic rail launcher10.1109/TPS.2017.2705238 ↗
5. 3D numerical simulation and analysis of railgun gouging mechanism10.1016/j.dt.2015.12.006 ↗
6. Design of an 8-MJ integrated launch package10.1109/TMAG.2004.838742 ↗
7. Moving mesh FE/BE hybrid simulation of electromagnetic field evolution for railgun10.1109/TPS.2016.2584981 ↗
8. Numerical simulation of dynamic large deformation and fracture damage for solid armature in electromagnetic railgun
9. A lagrangian formulation for mechanically, thermally coupled electromagnetic diffusive processes with moving conductors10.1109/20.364626 ↗
10. Analysis of startup behavior in a "C-shaped" armature using linked EMAP3D/DYNA3D finite element codes10.1109/20.738376 ↗
11. Analysis of transient current distribution in copper strips of different structures for electromagnetic railgun
12. Transition study of current distribution and maximum current density in railgun by 3-D FEM–IEM10.1109/TPS.2010.2063040 ↗
13. Research on proximity effect of electromagnetic railgun
14. Electrodynamic response study on railgun launcher based on electromechanical coupling model10.1016/j.dt.2019.05.022 ↗
15. Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension10.1016/j.ijplas.2016.09.010 ↗
16. Imposition of electric current to promote the Portevin-Le Chatelier effect of CoCrFeMnNi high-entropy alloy at low temperatures
17. Suppression of serrated flow in medium Mn steel under pulsed electric current10.1016/j.msea.2022.143271 ↗
18. Experiments on dynamic mechanical properties of austenitic stainless steel S30408 and S3160810.1016/j.jcsr.2021.106556 ↗
19. A new technique for tensile testing of engineering materials and composites at high strain rates10.1098/rspa.2019.0310 ↗
20. Rate-related study on mechanical properties and fracture characteristics in aluminium alloy via electromagnetic ring expansion test10.1016/j.ijmecsci.2021.106712 ↗
21. Eddy current induced dynamic deformation behaviors of aluminum alloy during EMF: modeling and quantitative characterization10.1016/j.jmatprotec.2018.08.024 ↗
22. Stress-strain data obtained at high rates using an expanding ring10.1007/BF02410405 ↗
23. An improved technique of expanding metal ring experiment under high explosive loading10.1063/1.4802255 ↗
24. Marciniak · 2002
25. Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures10.1016/j.actamat.2007.09.020 ↗
26. Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation10.1016/j.scriptamat.2009.04.006 ↗
27. Role of twinning and slip during compressive deformation of beryllium as a function of strain rate10.1016/j.ijplas.2011.08.006 ↗
28. The influence of strain rate on the microstructure transition of 304 stainless steel10.1016/j.actamat.2011.03.005 ↗
29. Deformation behavior and microstructure evolution of pure Cu subjected to electromagnetic bulging10.1016/j.msea.2013.11.032 ↗
30. Microstructure evolution of aluminum alloy under quasi-static, mechanical dynamic, and electromagnetic dynamic deformation10.1016/j.matchar.2023.112831 ↗
31. Ultrastrong nanocrystalline stainless steel and its hall-Petch relationship in the nanoscale10.1016/j.scriptamat.2018.06.014 ↗
32. Acoustic residual softening and microstructure evolution of T2 copper foil in ultrasonic vibration assisted micro-tension10.1016/j.msea.2022.143044 ↗
33. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
34. Hall-Petch and dislocation strengthening in graded nanostructured steel10.1016/j.actamat.2012.07.037 ↗