Fabrication and characterization of macroporous flyash ceramic pellets
Source abstract
Abstract
Abstract Macroporous ceramic pellets (MCPs) were prepared from industrial waste flyash via a mechanical foaming and pseudo-double-emulsion (PDE) method. The MCPs with different relative densities ( ρ r ) were characterized in terms of total and open porosities ( e t and e o ), average pore size ( d avg ), specific surface area ( S p ), surface roughness, and microstructure. The inner and outer pore structure of the MCPs was found to be composed of interconnected circular pores. The average size of the MCPs was controlled over the range of 2.0–3.0 mm by varying the solid loading ratio of slurries. Increasing the slurry loading led to increasing viscosity of the slurry and consequently greater size of the MCPs. The physical properties of the MCPs investigated herein (i.e., e t , e o , d avg , S p , and surface roughness) increased with decreasing ρ r (i.e., increasing foaming ratio). It was found that the degree of pore connectivity can be controlled by the ρ r of the MCPs. Heavy metal leaching test results showed that the amount of heavy metals released from the MCPs was much lower than that from flyash powders. The results were attributed to melting and subsequent immobilization of the heavy metals as well as their partial sublimation during the sintering process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Innovations in Concrete and Construction Materials · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Scheffler · 2005
2. Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers10.1016/S0955-2219(99)00024-2 ↗
3. Bioceramic bone graft substitutes: influence of porosity and chemistry10.1111/j.1744-7402.2005.02020.x ↗
4. Wastewater treatment using activated sludge entrapped in polyethylene glycol prepolymer10.1016/S0922-338X(99)89019-9 ↗
5. Catalytic ceramic filters for flue gas cleaning. 1. Preparation and characterization10.1021/ie00043a056 ↗
6. Macroporous interconnected dextran scaffolds of controlled porosity for tissue-engineering applications10.1016/j.biomaterials.2005.05.054 ↗
7. Preparation of porous cordierite using gelcasting method and its feasibility as a filter10.1023/A:1020939018359 ↗
8. Processing of porous ceramics
9. Preparation of dip-coated TiO2 photocatalyst on ceramic foam pellets10.1007/s10853-006-0574-x ↗
10. Modification of porous silica with activated carbon and its application for fixation of yeasts10.1023/A:1026522401784 ↗
11. Ceramic foams by powder processing10.1016/S0955-2219(98)00063-6 ↗
12. Microstructure and properties of LZSA glass-ceramic foams10.1016/j.msea.2007.05.098 ↗
13. Processing and properties of cellular silica synthesized by foaming sol–gels10.1111/j.1151-2916.1990.tb05095.x ↗
14. Porous ceramics with tri-modal pores prepared by foaming and starch consolidation10.1016/j.ceramint.2006.08.009 ↗
15. Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers10.1016/S0955-2219(99)00024-2 ↗
16. Production and characterization of glass ceramic foams from recycled raw materials10.1179/174367509X344971 ↗
17. Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents10.1016/j.ceramint.2007.10.019 ↗
18. Vitrification of low silica fly ash: suitability of resulting glass ceramics for architectural or electrical insulator applications10.1179/174367509X344980 ↗
19. Comparison between the process–structure–property relationships of silica foams prepared through two different processing routes10.1007/s10853-010-4500-x ↗
20. Processing of porous ceramic spheres by pseudo double-emulsion method10.1016/S0272-8842(02)00115-3 ↗
21. Gelcasting foams for porous ceramics
22. Preparation of porous ceramic pellet by pseudo double-emulsion method from 4-phase foamed slurry10.1023/A:1006774029478 ↗
23. Studies on the control of porous properties in the fabrication of porous supports10.4028/www.scientific.net/KEM.115.93 ↗
24. Observation and segmentation of gray images of surface cells in open celluar ceramic foams10.2109/jcersj.109.1271_580 ↗
25. Heat treatment of incinerator retired sorbents containing heavy metals10.1016/S0048-9697(00)00845-7 ↗
26. Properties of highly porous hydroxyapatite obtained by the gelcasting of foams10.1111/j.1151-2916.2000.tb01677.x ↗
27. SiC foams produced by gel casting: synthesis and characterization10.1002/adem.200400009 ↗
28. Microstructure of ceramic foams10.1016/S0955-2219(99)00229-0 ↗
29. Control of pore size in ceramic foams: influence of surfactant concentration10.1016/j.matchemphys.2008.07.099 ↗
30. Extended DLVO interactions between spherical particles and rough surfaces10.1016/j.jcis.2005.12.031 ↗
31. Effect of membrane surface roughness on colloid-membrane DLVO interactions10.1021/la027083c ↗
32. Hydrosol deposition in granular beds10.1016/0009-2509(88)85041-3 ↗
33. Retention and removal of pathogenic bacteria in wastewater percolating through porous media: a review10.1016/j.watres.2003.12.024 ↗
34. A review of biological aerated filters (BAFs) for wastewater treatment10.1089/ees.1999.16.201 ↗
35. Effects of SiO2 and Al2O3 on the hydration characteristics of MSWI fly ash slag
36. Laboratory scale thermal plasma arc vitrification studies of heavy metal-laden waste10.1080/10473289.1996.10467543 ↗
37. Reed · 1995