Mapping local orientation and strain fields around intermetallic particles in an Al2050 alloy during elastic tensile loading by scanning 3DXRD and DCT
Source abstract
Abstract
Intermetallic phases are known to significantly influence the evolution of the local microstructure in Al alloys during processing and thus affect their mechanical properties. However, non-destructively mapping the local orientation and strain fields around intermetallic particles remains technically challenging. Here, we present a multi-modal synchrotron X-ray study on an Al2050 alloy to map the orientations and strains in both Al grains and secondary-phase particles as a function of tensile loading in the elastic regime. Combined with phase contrast tomography (PCT), we visualize the spatial distribution of the secondary phases and pre-existing pores together with the 3D Al grain structure characterized by diffraction contrast tomography (DCT), while higher resolution mappings of orientations and strains for both Al and secondary phase particles (Al 7 Cu 2 Fe) are resolved by Scanning 3D X-Ray Diffraction (s3DXRD). This multi-modal approach not only allows comprehensive microstructure characterization, but also cross-validates the grain orientation reconstruction. The results show that during tensile loading, the intermetallic particles undergo a compressive strain and induce a high stress gradient and unexpected lattice rotation in a local area of an Al grain. This highlights the presence of grain plasticity at only 55% of the yield stress influenced by the intermetallic particles. We demonstrate that studying the evolution of the matrix-precipitates microstructure greatly benefits from the multi-modal approach of combining PCT, DCT and s3DXRD. • Synchrotron grain mapping and tomography is combined to study Al2050 alloy • Variations in grain orientations are quantified between scanning 3DXRD and DCT • Scanning 3DXRD is able to reconstruct Al 7 Cu 2 Fe intermetallic grains successfully • Strain maps of Al and secondary phases characterized by s3DXRD • Local build-ups of stresses and lattice rotation of Al around the intermetallics
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Advanced Electron Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Revisiting precipitates in Al-cu-Li alloys: experiments and first-principles calculations of thermodynamic stability of Al2CuLi(T1) precipitate10.1016/j.jallcom.2024.174495 ↗
2. Microstructural evolution during ageing of Al–Cu–Li–x alloys10.1016/j.actamat.2013.12.001 ↗
3. The influence of Cu/Li ratio on precipitation in Al–Cu–Li–x alloys10.1016/j.actamat.2012.12.041 ↗
4. The role of plastic deformation on the competitive microstructural evolution and mechanical properties of a novel Al-Li-cu-X alloy10.1016/S1471-5317(00)00002-X ↗
5. Operando study of the dynamic evolution of multiple Fe-rich intermetallics of an Al recycled alloy in solidification by synchrotron X-ray and machine learning10.1016/j.actamat.2024.120267 ↗
6. Synchrotron X-ray operando study and multiphysics modelling of the solidification dynamics of intermetallic phases under electromagnetic pulses10.1016/j.actamat.2023.119593 ↗
7. Precipitates and intermetallic phases in precipitation hardening Al–cu–Mg–(Li) based alloys10.1179/174328005X14357 ↗
8. An optimized constitutive model and microstructure characterization of a homogenized Al-Cu-Li alloy during hot deformation10.1016/j.jallcom.2022.167290 ↗
9. The effect of major constituents on microstructure and mechanical properties of cast Al-Li-Cu-Zr alloy10.1016/j.matchar.2020.110800 ↗
10. 3D characterization of partially recrystallized Al using high resolution diffraction contrast tomography10.1016/j.scriptamat.2018.08.001 ↗
11. Direct non-destructive observation of bulk nucleation in 30% deformed aluminum10.1016/j.scriptamat.2009.07.027 ↗
12. Pore closure in thick aluminum plate: from industrial hot rolling to individual pore observation10.1016/j.jmatprotec.2022.117509 ↗
13. Exceptional fatigue life and ductility of new liquid healing hot isostatic pressing especially tailored for additive manufactured aluminum alloys10.1016/j.scriptamat.2023.115512 ↗
14. High-temperature strength in an additively manufactured Al-based superalloy with stable nanoscale eutectic cellular networks10.1038/s41467-025-66441-0 ↗
15. 3D strain heterogeneity and fracture studied by X-ray tomography and crystal plasticity in an aluminium alloy10.1016/j.ijplas.2024.104146 ↗
16. In situ DIC and EBSD study of plasticity anisotropy, strain partitioning and strain localization in a duplex stainless steel10.1016/j.msea.2025.148874 ↗
17. 3D/4D characterization of strain distribution evolving within the microstructure during plastic deformation10.1016/j.cossms.2020.100835 ↗
18. Fang · 2025
19. New opportunities at the materials science beamline at ESRF to exploit high energy nano-focus X-ray beams10.1016/j.cossms.2020.100818 ↗
20. Development of AI crack segmentation models for additive manufacturing
21. Forward-model-based grain reconstruction to improve the tolerance of diffraction contrast tomography for increased sample deformation10.1107/S160057672500250X ↗
22. Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis10.1063/1.3100200 ↗
23. Domain auto finder (DAFi) program: the analysis of single-crystal X-ray diffraction data from polycrystalline samples10.1107/S1600576722008081 ↗
24. Gutierrez · 2024
25. Microstructures and tensile fracture behavior of 2219 wrought Al–Cu alloys with different impurity of Fe10.3390/met11010174 ↗
26. Effects of Fe content on microstructure and mechanical properties of A206 alloy10.2320/matertrans1989.41.708 ↗
27. Development of high Fe content squeeze cast 2A16 wrought Al alloys with enhanced mechanical properties at room and elevated temperatures10.1016/j.matchar.2018.06.009 ↗
28. Mechanical properties of Al-Cu-Fe quasicrystalline and crystalline phases: an analogy10.1016/j.intermet.2014.02.004 ↗
29. 3D microstructural characterization and mechanical properties of constituent particles in Al 7075 alloys using X-ray synchrotron tomography and nanoindentation10.1016/j.jallcom.2014.03.010 ↗
30. Poisson’s ratio and modern materials10.1038/nmat3134 ↗
31. The thermal expansion coefficient of mechanically alloyed Al-Cu-Fe quasicrystalline powders10.1016/S1359-6462(00)00595-9 ↗
32. Liu · 2005
33. Anisotropy of elastic properties in various aluminium-lithium sheet alloys10.1016/1359-6454(95)00320-7 ↗
34. In-situ EBSD observation of texture evolution and lattice rotation behavior in shear deformation of thin-walled aluminum alloy tubes10.1016/j.jmrt.2024.01.150 ↗
35. Intra-grain orientation distributions in deformed aluminium: synchrotron X-ray diffraction experiment and crystal-plasticity finite-element simulation10.1016/j.actamat.2023.119419 ↗