Critical current density improvement of RHQT Nb3Al superconducting wires by incorporating magnetic Dy2O3 nanoparticles as additional flux pinning centers
Source abstract
Abstract
In this paper, we prepared magnetic Dy 2O 3 nanoparticles (n-Dy 2O 3) doped Nb 3Al superconducting wires by rapid heating, quenching and transformation (RHQT) method, and investigated the micro-defects, superconducting properties and flux pinning mechanisms. TEM results showed high-density stacking faults (SF) with spacing of 5–25 nm located in Nb 3Al (210) crystal planes, which is due to the absence of Nb atoms on the {100} crystal planes. Additionally, many intra-granular and inter-granular Dy 2O 3 nanoparticles with size of 4–40 nm were also observed in the Nb 3Al superconducting phase. J c was promoted in the doped samples, obtaining the best J c of 1.95 × 10 5 A/cm 2@ 4.2 K, 12 T in 1 at.% n-Dy 2O 3 doped Nb 3Al wire, which was nearly 70 % higher than pristine Nb 3Al wire. By doping n-Dy 2O 3, the f P( F p/ F p,max)- h( B/ B irr) peaks shift to larger h value (higher field). The flux pinning mechanism by fitting f P- h curves showed dominant surface pinning combined with point pinning, corresponding to the crystal defect of stacking faults and nanoparticles, respectively. The pinning mechanism verified that the nanoparticles acted as additional pinning centers to significantly elevate the J c performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Physics of Superconductivity and Magnetism · Superconducting Materials and Applications · Superconductivity in MgB2 and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Superconducting magnet system in a fusion reactor10.1016/j.jnucmat.2004.04.151 ↗
2. Nb3Al conductors for high field applications10.1088/0953-2048/13/9/201 ↗
3. Strain effects in Nb3Al multifilamentary conductors prepared by phase transformation from bcc supersaturated-solid solution10.1063/1.119447 ↗
4. Development of a 13-T and 40-kA Nb3Al conductor for toroidal coils of fusion reactors10.1016/S0920-3796(98)00181-1 ↗
5. Critical-current degradation in Nb3Al wires due to axial and transverse stress10.1016/0920-3796(93)90053-K ↗
6. Niobium aluminide as a source of high-current superconductors10.1016/S0966-9795(98)00084-3 ↗
7. Effect of rapid heating, quenching and transformation conditions on the superconducting properties and microstructure of jelly-roll processed Nb3Al superconductors10.1088/0953-2048/15/10/307 ↗
8. Nb3Al conductors-rapid-heating, quenching and transformation process10.1109/77.828404 ↗
9. Large improvement in high-field critical current densities of Nb3Al conductors by the transformation-heat-based up-quenching method10.1088/0953-2048/13/10/101 ↗
10. Optimization studies for processing Nb3Al by a rapid Ohmic-heating and quenching method10.1109/77.919955 ↗
11. Influence of transformation heat treatment on microstructure and defects in RHQT-processed Nb3Al10.1109/TASC.2003.812357 ↗
12. Possible pinning centers in transformation-processed Nb3Al superconductors10.1109/TASC.2011.2177951 ↗
13. Development of Nb3Al/Cu multifilamentary superconductors
14. Advances in high-field superconducting composites by addition of artificial pinning centers to niobium-titanium10.1088/0953-2048/12/8/201 ↗
15. High critical current density in internally-oxidized Nb3Sn superconductors and its origin10.1016/j.scriptamat.2020.05.043 ↗
16. Partial dissolution of MgO and the effect on critical current density in urea-doped MgB2 bulks10.1016/j.jallcom.2015.02.018 ↗
17. Enhancement of critical current density for nano (n)-ZnO doped MgB2 superconductor10.1016/j.physc.2013.10.001 ↗
18. Mechanism of enhancement in electromagnetic properties of MgB2 by Nano SiC doping
19. Enhanced higher temperature irreversibility field and critical current density in MgB2 wires with Dy2O3 additions10.1088/1361-6668/abc73c ↗
20. Strong pinning enhancement in MgB2 using very small Dy2O3 additions
21. Introducing nano-scale MgO particles into RHQT Nb3Al superconducting wires to significantly improve the critical current density10.1016/j.jallcom.2023.172452 ↗
22. Magnetic nanoparticles as efficient bulk pinning centers in type-II superconductors10.1103/PhysRevB.71.024527 ↗
23. Significant improvement of flux pinning and irreversibility field of nano-Ho2O3 doped MgB210.1016/j.physc.2007.04.280 ↗
24. Critical current density enhancement of Nb3Sn superconducting wires by incorporating oxygen through rapid-heating method
25. Magnetization of hard superconductors10.1103/PhysRevLett.8.250 ↗
26. Reproducible stable critical current density in powder-in-tube (PIT) Nb3Al superconductors by multi-time rapid heating and quenching process10.1016/j.intermet.2023.107938 ↗
27. Three-dimensional structural analysis for crystal defects in phase-transformed Nb3Al
28. Microstructural observation of transformed Nb3Al superconductors using TEM and atom probe tomography10.1109/TASC.2013.2283527 ↗
29. Microstructure-critical current relationships in hard superconductors10.1007/BF02660176 ↗
30. Flux jumps at pulsed field magnetization10.1007/s10948-016-3472-8 ↗
31. Low field flux jumping in high performance multifilamentary Nb3Al and Nb3Sn composite strands10.1109/77.784666 ↗
32. Flux creep and flux jumping10.1103/PhysRevB.53.12311 ↗
33. Scaling laws for flux pinning in hard superconductors10.1063/1.1662353 ↗
34. Flux pinning mechanisms in type II superconductors10.1080/14786439808206556 ↗
35. The role of grain boundaries in determining Jc in high-field high-current superconductors10.1080/13642818708217956 ↗
36. The strong influence of Ti, Zr, Hf solutes and their oxidation on microstructure and performance of Nb3Sn superconductors10.1016/j.jallcom.2020.158270 ↗