Microstructural characterization and mechanical property of active soldering anodized 6061 Al alloy using Sn–3.5Ag–xTi active solders
Source abstract
Abstract
Abstract Active solders Sn–3.5Ag–xTi varied from x = 0 to 6 wt.% Ti addition were prepared by vacuum arc re-melting and the resultant phase formation and variation of microstructure with titanium concentration were analyzed using X-ray diffraction, optical microscopy and scanning electron microscopy. The Sn–3.5Ag–xTi active solders are used as metallic filler to join with anodized 6061 Al alloy for potential applications of providing a higher heat conduction path. Their joints and mechanical properties were characterized and evaluated in terms of titanium content. The mechanical property of joints was measured by shear testing. The joint strength was very dependent on the titanium content. Solder with a 0.5 wt.% Ti addition can successfully wet and bond to the anodized aluminum oxide layers of Al alloy and posses a shear strength of 16.28 ± 0.64 MPa. The maximum bonding strength reached 22.24 ± 0.70 MPa at a 3 wt.% Ti addition. Interfacial reaction phase and chemical composition were identified by a transmission electron microscope with energy dispersive spectrometer. Results showed that the Ti element reacts with anodized aluminum oxide to form Al 3 Ti-rich and Al 3 Ti phases at the joint interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Solder joining for thermal management in electronics
2. Active solder joining of metals, ceramics, and composites
3. Active soldering of indium tin oxide (ITO) with Cu in air using an Sn3.5Ag4Ti(Ce, Ga) filler10.1361/105994903770342890 ↗
4. Active soldering of ITO to copper
5. Low temperature bonding of alumina/alumina and alumina/copper in air using Sn3.5Ag4Ti(Ce, Ga) filler10.1007/s11664-007-0190-9 ↗
6. Active soldering of ZnS–SiO2 sputtering targets to copper backing plates using an Sn3.5Ag4Ti(Ce,Ga) filler metal10.1016/j.jmatprotec.2007.08.045 ↗
7. Smith RW, Redd R. Electronic package formed using low-temperature active solder including indium, bismuth, and/or cadium, US patent no. 7806994.
8. Full metal TIMs
9. Al–Ti (aluminum–titanium)10.1007/s11669-005-0137-x ↗
10. Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basis10.1016/S0966-9795(01)00073-5 ↗
11. Interfacial structure of metal–ceramic joints10.2355/isijinternational.30.1033 ↗
12. Reactions of Ti and Zr with AlN and Al2O310.1016/0956-7151(92)90266-H ↗
13. Characterization of interfaces between liquid tin and alumina in the presence of titanium alloy additions10.1023/B:INTS.0000012292.19049.e2 ↗
14. Role of titanium on the reactive spreading of lead-free solders on Al2O310.1557/jmr.2006.0393 ↗