Processing, structure, and properties of a rolled, ultrahigh-carbon steel plate exhibiting a damask pattern
Source abstract
Abstract
Abstract A plate of ultrahigh-carbon steel (UHCS) was processed by hot and warm rolling, according to the Wadsworth–Sherby mechanism, to produce damask surface markings. The surface markings produced by this industrial processing method are similar to those of historical Damascus steels, which are also of hypereutectoid composition. The microstructure of the UHCS with damask contains fine, spheroidized carbides and a discontinuous network of proeutectoid carbides along former-austenite grain boundaries, which give rise to a surface pattern visible with the unaided eye. Tensile tests at room temperature measured tensile strengths and ductilities, which depend on sample orientation relative to the rolling direction of the plate. Hot and warm rolling causes a directional microstructure, giving rise to both an elongated, directional damask pattern and a directional dependence for strength and ductility. A maximum tensile ductility of 10.2% was measured at 45° relative to the rolling direction. The plate material was subjected to heat treatments creating pearlitic and martensitic microstructures, which retain visible damask patterns.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Cultural Artifacts · Microstructure and Mechanical Properties of Steels · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Superplastic ultra-high carbon steels10.1016/0036-9748(75)90352-X ↗
2. A history of the patenting and licensing of ultrahigh carbon steels
3. Damascus steel rediscovered?10.2355/isijinternational1966.19.381 ↗
4. On the Bulat — Damascus steel revisited10.1016/0079-6425(80)90014-6 ↗
5. Damascus steel10.1038/scientificamerican0285-112 ↗
6. Damascus steel and superplasticity: Part I. Background, superplasticity, and genuine Damascus steel
7. Damascus steel and superplasticity: Part II. Welded Damascus steels
8. Comments on Damascus steel: Part III. ‘The Wadsworth–Sherby Mechanism’ by Verhoeven et al.10.1016/1044-5803(92)90040-O ↗
9. Mechanical behavior of an ultrahigh-carbon steel exhibiting a damask surface pattern
10. The evolution of ultrahigh carbon steels — from the great pyramids, to Alexander the Great, to Y2K
11. The case for ultrahigh-carbon steels as structural materials10.1007/BF03222405 ↗
12. Influence of microstructure on tensile properties of spheroidized ultrahigh-carbon (1.8PctC) steel10.1007/BF02665480 ↗
13. Fracture behavior of spheroidized hypereutectoid steels10.1016/0956-7151(95)90166-3 ↗
14. Pearlite in ultrahigh carbon steels: heat treatments and mechanical properties10.1007/BF02647751 ↗
15. A comparison of mechanical behavior in pearlitic and spheroidized hypereutectoid steels
16. Fracture behavior of two ultrahigh-carbon steels
17. Damascus steel, characterization of one Damascus steel sword10.1016/1044-5803(90)90042-I ↗
18. Experiments to reproduce the pattern of Damascus steel blades10.1016/1044-5803(92)90115-X ↗
19. Studies of Damascus steel blades: Part I. Experiments on reconstructed blades10.1016/1044-5803(93)90020-V ↗
20. Studies of Damascus steel blades: Part II. Destruction and reformation of the pattern10.1016/1044-5803(93)90021-M ↗
21. Wootz Damascus steel blades10.1016/S1044-5803(96)00019-8 ↗
22. The key role of impurities in ancient Damascus steel blades10.1007/s11837-998-0419-y ↗
23. Sherby OD, et al. Superplastic UHCSs. U.S. Patent 3,951,697, Stanford University, 20 April 1976.