The interactions between dynamic precipitates and dynamic recrystallization in Mg-5Zn-1Mn alloys during hot compression
Source abstract
Abstract
Abstract The interactions between dynamic precipitates and dynamic recrystallization (DRX) in hot compressed ZM51 alloys with strain rates from 1 s−1 to 20 s−1 were carefully investigated by optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The DRX grain size and the precipitate volume fraction decrease, while the DRX volume fraction increases with increasing the strain rate (T = 300 °C, e = 1.61). The proportion of β2′ phase is larger than that of β1′ phase, indicating that β2′ phase becomes the main precipitates at the later deformation stage. Grain boundary bowing is the main DRX mechanism at the strain rate of 1 s−1, while the twin-aided DRX mechanism dominates at the higher strain rates (έ ≥10 s−1). The DRX grain size, the volume fractions of the precipitates and DRX increase with increasing the strain (T = 300 °C, έ = 10 s−1). Increasing the strain didn't change the types of the precipitates, but led to the reduction of β1′ phase and the increase of β2′ phase. All the precipitates become spheroid. The higher DRX volume fraction with the lower precipitate volume fraction were detected at the higher strain rates (έ ≥10 s−1), while the situations at the lower strain rate (έ =1 s−1) were reverse. It is due to the fact that the precipitates can hinder the nucleation and growth of DRX because of their pinning effect on dislocations, twin boundaries, sub-grain boundaries and DRX grain boundaries. The precipitation sequence in the deformation process is more complex than that in the traditional aging process and the deformation accelerates the precipitation and phase transformation processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. 1988 · 353
2. Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn10.1016/j.actamat.2004.07.015 ↗
3. Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet10.1016/S0921-5093(02)00096-5 ↗
4. Dynamic recrystallization and texture development during hot deformation of magnesium alloy AZ3110.1016/S1003-6326(08)60228-9 ↗
5. Continuous dynamic recrystallization in magnesium alloy10.4028/www.scientific.net/MSF.419-422.509 ↗
6. M.R. Barnett. Microstructural development during hot working of Mg-3Al-1Zn10.1007/s11661-007-9207-5 ↗
7. Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy10.1016/j.msea.2010.02.008 ↗
8. Microstructural evolution during the annealing of an extruded AZ31 magnesium alloy10.1016/j.jallcom.2010.07.008 ↗
9. Dynamic recrystallization based on twinning in coarsed-grained Mg10.4028/www.scientific.net/MSF.419-422.521 ↗
10. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
11. Twinning, dynamic recovery and recrystallizaition in hot worked Mg-Al-Zn alloy10.1016/S0921-5093(02)00007-2 ↗
12. Effects of calcium on texture and mechanical properties of hot-extruded Mg-Zn-Ca alloys10.1016/j.msea.2012.01.030 ↗
13. Effect of particles on the formation of deformation twins in a magnesium-based alloy10.1016/j.msea.2009.04.001 ↗
14. Improving microstructure and mechanical properties in Mg-6mass% Zn alloys by combined addition of Ca and Ce10.1016/j.msea.2016.01.034 ↗
15. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
16. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
17. Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg-6Zn alloy10.1016/j.actamat.2013.03.033 ↗
18. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
19. Structural characteristics of precipitates in Mg-Zn-based alloys10.1016/j.scriptamat.2007.07.028 ↗
20. Particle effects on recrystallization in magnesiume-manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
21. Effect of Ca-addition on dynamic recrystallization of Mg-Zn alloy during hot deformation10.1016/j.msea.2013.05.054 ↗
22. Humphreys · 2004 · 305 · 208
23. Deformation-induced dynamic precipitation and resulting microstructure in a Mg-Zn-Ca alloy10.1007/s11837-018-2880-6 ↗
24. Dynamic microstructural changes in Mg-9Al-1Zn alloy during hot compression10.1016/j.scriptamat.2009.03.051 ↗
25. Enhancing the mechanical properties of high strain rate rolled Mg-6Mn-1Mn alloy by pre-rolling10.1007/s10853-017-1214-3 ↗
26. Deformation induced dynamic recrystallization and precipitation strengthening in an Mg-Mn-Mn alloy processed by high strain rate rolling10.1016/j.matchar.2016.09.025 ↗
27. Improving the mechanical properties of a ZM61 magnesium alloy by pre-rolling and high strain rate rolling10.1016/j.msea.2017.12.014 ↗
28. Dynamic precipitation, microstructure and mechanical properties of Mg-5Zn-1Mn alloy sheets prepared by high strain-rate rolling10.1016/j.matdes.2016.03.129 ↗
29. Dynamic precipitation behavior before dynamic recrystallization in a Mg-Zn-Mn alloy during hot compression10.1016/j.matchar.2019.04.041 ↗
30. Thermal simulation on hot deformation behavior of ZK60 magnesium alloy
31. Effect of twinning and dynamic recrystallization on the high strain rate rolling process10.1016/j.scriptamat.2010.07.029 ↗
32. Microstructure evolution of Mg-Zn binary alloy during a direct extrusion process10.1016/j.scriptamat.2008.11.017 ↗
33. New orientations between β2’ phase and α matrix in a Mg-Zn-Mn alloy processed by high strain rate rolling10.1016/j.jallcom.2018.04.005 ↗
34. Quantification of volume fraction of precipitates in an aged Al-1.0 mass% Mg2Si alloy10.2320/matertrans1989.41.1275 ↗
35. High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy10.1016/j.msea.2016.10.095 ↗
36. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
37. On the role of twinning and stacking faults on the crystal plasticity and grain refinement in magnesium alloys10.1016/j.actamat.2017.11.004 ↗
38. Transmission electron microscopy study of stacking faults and their interaction with pyramidal dislocations in deformed Mg10.1016/j.actamat.2009.08.066 ↗
39. Twinning-like lattice reorientation without a crystallographic twinning plane10.1038/ncomms4297 ↗
40. Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy10.1016/j.actamat.2006.09.018 ↗
41. Prism stacking faults observed contiguous to a {10−12} twin in a Mg-Y alloy10.1016/j.scriptamat.2013.12.015 ↗