journal article·2005-08Open access

Characterization of microstructural phases of steels by sound velocity measurement

C. Hakan Gür, B. Orkun Tuncer

Materials Characterization· Volume 55· Issue 2

Abstract

Abstract For investigating the effect of phases on sound velocity, thin disk shaped samples were prepared from AISI 4140 and AISI 5140 steels. An initial heat treatment was applied to all specimens for obtaining a uniform reference microstructure. To eliminate the effect of grain size all specimens were treated identically through austenitization at 850 °C/30 min. Samples, each consisting of only one phase, namely, martensite, bainite, fine pearlite–ferrite, and coarse pearlite–ferrite were obtained by quenching, and several isothermal heat treatments. The microstructures were characterized by metallographic examinations and hardness measurements. By measuring sound velocities for both longitudinal and transversal waves, the reference values were obtained for each individual phase. Martensite has the lowest sound velocity while coarse pearlite–ferrite has the highest. The differences in sound velocity arise primarily from differences in the elastic moduli of the phases which are affected by the degree of lattice distortion and misorientation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Nondestructive characterization of materials
2. Ultrasonic attenuation and velocity in three transformation products in steel10.1063/1.1713652 ↗
3. From micrograph to grain-size distribution with ultrasonic applications10.1063/1.1713671 ↗
4. Ultrasonic attenuation and velocity in AISI/SAE 52100 steel quenched from various temperatures10.1007/BF02811803 ↗
5. Ultrasonic prediction of grain size and mechanical properties in plain carbon steel
6. Ultrasonic attenuation and microstructure in low alloy steels10.1179/msc.1981.15.11-12.554 ↗
7. Physical acoustics and microstructure of iron alloys10.1179/095066084790149147 ↗
8. Ultrasonic attenuation in quenched railway wheels10.1016/0308-9126(89)91278-9 ↗
9. Grain size measurements in austenitic stainless steel using ultrasonics
10. Effect of microstructure of low carbon steels on ultrasonic attenuation10.1109/58.842049 ↗
11. Ultrasonic characterization of hot-rolled and heat-treated plain carbon steels10.1784/insi.45.9.615.52936 ↗
12. Murav'ev · 1989 · 135
13. An investigation into the ultrasonic behavior of cast and heat-treated structures in steel
14. Ultrasonic characterization of material hardness10.1016/S0041-624X(99)00081-5 ↗
15. A novel technique for characterizing annealing behavior10.1016/0956-716X(94)90249-6 ↗
16. Study of the influence of deformation and thermal treatment on the ultrasonic behavior of steel10.1016/0924-0136(94)90074-4 ↗
17. Ultrasonic velocity measurements for estimation of grain size in austenitic stainless steel10.1016/0963-8695(95)00011-L ↗
18. Verhoeven · 1975 · 457