Effect of defocus distance and energy density on melt pool morphology, surface roughness, and grain orientation of 70/30 copper-nickel alloy in laser powder bed fusion
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Electrochemical corrosion behaviour of 90—10 Cu—Ni alloy in chloride-based electrolytes10.1023/B:JACH.0000031164.32520.58 ↗
2. Corrosion behavior of high-strength C71500 copper-nickel alloy in simulated seawater with high concentration of sulfide10.3390/ma15238513 ↗
3. Erosion–corrosion behavior of 90/10 and 70/30 copper–nickel tubes in 1 wt% NaCl solution10.3390/met13020401 ↗
4. Review of laser powder bed fusion (LPBF) fabricated Ti-6Al-4V: process, post-process treatment, microstructure, and property
5. Metastable pitting corrosion behavior of laser powder bed fusion produced Ti-6Al-4V in Hank’s solution10.1016/j.corsci.2022.110333 ↗
6. The effect mechanism of laser beam defocusing on the surface quality of IN718 alloy prepared by laser powder bed fusion10.1016/j.powtec.2024.119841 ↗
7. A study of the influence of novel scan strategies on residual stress and microstructure of L-shaped LPBF IN718 samples10.1016/j.matdes.2022.110386 ↗
8. On the current research progress of metallic materials fabricated by laser powder bed fusion process: a review10.1016/j.jmrt.2022.07.085 ↗
9. Remarkably enhanced corrosion performance of 316 L stainless steel via laser powder bed fusion thin-layer deposition
10. Heat treatment effect on the corrosion resistance of 316L stainless steel produced by laser powder bed fusion10.3390/met15010041 ↗
11. On the influence of laser defocusing in selective laser melting of 316L
12. Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium10.1088/0022-3727/40/18/037 ↗
13. A simple methodology for predicting laser-weld properties from material and laser parameters10.1088/0022-3727/44/44/445401 ↗
14. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing10.1016/j.jmatprotec.2014.06.005 ↗
15. Melt pool simulation for the evaluation of process parameters in selective laser melting
16. Effect of temperature on the corrosion of 70/30 copper–nickel in sea water10.1179/000705983798274047 ↗
17. Effect of alloying on the resistance of Cu-10% Ni alloys to seawater impingement10.5006/1.3284036 ↗
18. A bimodal and heterogeneous laminate structure with alternately distributed copper-base and nickel-base alloys via multi-material laser powder bed fusion (MM-LPBF) additive manufacturing10.1016/j.matlet.2024.137494 ↗
19. Microstructures and corrosion properties of wire arc additive manufactured copper–nickel alloys10.3390/ma17040876 ↗
20. Corrosion evaluation and microstructural characteristics of 70/30 copper-nickel alloy fabricated by laser powder bed fusion
21. Influence of the post-processing operations on surface integrity of metal components produced by laser powder bed fusion additive manufacturing: a review10.1080/10910344.2020.1855649 ↗
22. Laser powder bed fusion additive manufacturing (LPBF-AM): the influence of design features and LPBF variables on surface topography and effect on fatigue properties10.1080/10408436.2022.2041396 ↗
23. Qualification of a Ni–Cu alloy for the laser powder bed fusion process (LPBF): its microstructure and mechanical properties10.3390/app10103401 ↗
24. Investigation on mechanical properties and corrosion behavior of laser powder bed fusion 70/30 copper-nickel alloy10.1016/j.corsci.2024.112040 ↗
25. A comprehensive comparison of the analytical and numerical prediction of the thermal history and solidification microstructure of Inconel 718 products made by laser powder-bed fusion10.1016/J.ENG.2017.05.023 ↗
26. Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting
27. High power laser powder bed fusion of Inconel 718 alloy: effect of laser focus shift on formability, microstructure and mechanical properties10.1016/j.jmatprotec.2022.117824 ↗
28. Effect of process parameters on the surface characteristics of AlSi12 samples made via selective laser melting10.1016/j.matpr.2017.07.221 ↗
29. The effect of laser focus shift on microstructural variation of Inconel 718 produced by selective laser melting10.1016/j.matdes.2018.04.019 ↗
30. Optics of Gaussian beams
31. Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges10.1063/1.4937809 ↗
32. Absorbance study of powder conditions for laser additive manufacturing10.1016/j.matdes.2022.110591 ↗
33. Mertz · 2019
34. EBSD sample preparation: techniques, tips, and tricks10.1017/S1551929500053669 ↗
35. Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes
36. Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy10.1016/j.optlastec.2015.07.009 ↗
37. Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: effect of processing conditions and powder properties10.1016/j.jmatprotec.2013.03.009 ↗
38. Effect of scan pattern on the microstructure and mechanical properties of powder bed fusion additive manufactured 17–4 stainless steel10.1016/j.matdes.2017.07.047 ↗
39. Selective laser melting of titanium alloy with 50 wt% tantalum: effect of laser process parameters on part quality10.1016/j.ijrmhm.2018.08.006 ↗
40. Influence of the processing parameters on the microstructure and mechanical properties of 316L stainless steel fabricated by laser powder bed fusion
41. Consolidation phenomena in laser and powder-bed based layered manufacturing10.1016/j.cirp.2007.10.004 ↗
42. A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel PART I: proposal of a heat source model10.2478/IJNAOE-2013-0138 ↗
43. Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing10.1038/s41467-022-28694-x ↗
44. In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing10.1016/j.apmt.2017.08.006 ↗
45. Interpretation of mechanical properties gradient in laser-welded joints: experiments and grain morphology-dependent crystal plasticity modeling10.1016/j.jmrt.2024.10.226 ↗
46. The interplay of thermal gradient and laser process parameters on the mechanical properties, geometrical and microstructural characteristics of laser-cladded titanium (Ti6Al4V) alloy composite coatings10.3390/met13091617 ↗
47. Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 superalloy10.1016/j.actamat.2015.05.052 ↗
48. Numerical prediction of grain structure formation during laser powder bed fusion of 316 L stainless steel10.1016/j.matdes.2020.109434 ↗
49. Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening10.1038/s41524-021-00524-6 ↗
50. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
51. Review on volumetric energy density: influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion10.1007/s40964-022-00328-0 ↗
52. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
53. Multiscale modeling of powder bed–based additive manufacturing10.1146/annurev-matsci-070115-032158 ↗
54. Solidification microstructure simulation of Ti-6Al-4V in metal additive manufacturing: a review
55. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
56. Predicting meltpool depth and primary dendritic arm spacing in laser powder bed fusion additive manufacturing using physics-based machine learning10.1016/j.matdes.2023.112540 ↗
57. Fluid dynamics effects on microstructure prediction in single-laser tracks for additive manufacturing of IN625