In-situ observation of microstructure evolution and phase transformation under continuous cooling in Ru-containing TiAl alloys
Source abstract
Abstract
Abstract Ruthenium is a promising element to heighten the mechanical properties of TiAl alloys. The microstructure evolution and phase transformation of two Ru-containing TiAl alloys have been in-situ observed by the high-temperature laser-scanning confocal microscopy from melting to 1000 °C under the cooling rates of 10 K/min and 100 K/min. For Ti-45Al-2.0Ru-0.2B alloy, some net-like and spherical microstructures precipitated at α grain boundaries and inside α grains by the eutectoid transformation of α → γ + τ1 at 10 K/min. While the rod-like τ1 phase replaced net-like morphology and dispersed in γ matrix at 100 K/min condition. For Ti-45Al-1.0Ru-0.2B alloy, the mixture of blocky γ phase and dispersive fine τ1 particles emanated from α grain boundaries via a divorced eutectoid transformation at 10 K/min. Upon 100 K/min, a complex microstructure appeared which consists of lamellar colony, blocky γ, γ/τ1 mixture and B2 phase. The near-equilibrium phase transformation of the present two Ru-containing TiAl alloys follows the sequence: L → L + β → α + β → α → α + γ → α + γ + τ1, which clarifies that the τ1-containing mixtures precipitate after the formation of α grain, rather than during solidification process. The related crystallographic orientation and microstructure evolution mechanism were investigated. In addition, it's found that the Ru element promotes the formation of duplex microstructure. The duplex microstructure containing dispersive τ1 particles of Ti-45Al-1.0Ru-0.2B alloy at 10 K/min obtained the maximum microhardness and can be considered as a potential optimal microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Alloy design for aircraft engines10.1038/nmat4709 ↗
2. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
3. Advances in gammalloy materials-processes-application technology: successes, dilemmas, and future10.1007/s11837-018-2747-x ↗
4. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
5. Intermetallics: why is it so difficult to introduce them in gas turbine engines?10.1016/j.intermet.2006.01.064 ↗
6. Effect of ternary additions on mechanical properties of TiAl10.1016/S1359-6454(97)00422-9 ↗
7. Effects of alloying elements on creep of TiAl alloys with a fine lamellar structure10.1016/S1359-6454(01)00426-8 ↗
8. A preliminary study on the creep behavior of Ti-45Al-10Nb alloy10.1016/S0921-5093(01)01150-9 ↗
9. Martensitic transformation and metastable β-phase in binary titanium alloys with d-metals of 4-6 periods10.1016/S1359-6462(00)00694-1 ↗
10. Constitution of Ti-Al-Ru system10.1179/mst.1989.5.7.632 ↗
11. The alloying of titanium aluminides with ruthenium10.1595/003214089X333106113 ↗
12. The effect of ruthenium addition on the microstructure and mechanical properties of TiAl alloys10.1016/j.intermet.2011.04.005 ↗
13. Constitution of the ternary system Al-Ru-Ti (aluminum-ruthenium-titanium)10.1361/105497103772084552 ↗
14. New titanium-aluminum-X alloys for aerospace applications10.1007/BF02834112 ↗
15. On the eutectoid decomposition of α→γ+τ1 in a Ru-containing TiAl alloy10.1016/j.jallcom.2019.03.181 ↗
16. Reassessment of the binary aluminum-titanium phase diagram10.1361/154770306X109809 ↗
17. The pitsch-petch orientation relationship in ferrous pearlite at small undercooling10.1007/s11661-999-0114-9 ↗
18. Microstructural control of Nb–Si alloy for large Nb grain formation through eutectic and eutectoid reactions10.1016/j.intermet.2006.10.041 ↗
19. The decomposition of the beta phase in Ti-44Al-8Nb and Ti-44Al-4Nb-4Zr-0.2Si alloys10.1016/S1359-6454(98)00113-X ↗
20. Microstructure evolution and mechanical properties of a Ti-45Al-8.5Nb-(W, B, Y) alloy obtained by controlled cooling from a single β region10.1016/j.jallcom.2017.12.326 ↗
21. Effect of heat treatments on the microstructure and mechanical properties of a cast intermetallic Ti-44Al-4Nb-4Zr-0.2Si-0.3B alloy
22. Crystal growth of TiAl alloys10.1016/S0966-9795(98)00056-9 ↗
23. Uphill diffusion in ternary Ni-Re-Ru alloys at 1000°C and 1100°C10.1016/j.msea.2007.01.114 ↗
24. Fracture toughness and high temperature strength of unidirectionally solidified Nb-Si binary and Nb-Ti-Si ternary alloys10.1016/j.jallcom.2006.01.071 ↗
25. Effect of cooling rate on Ti-cu eutectoid alloy microstructure10.1016/j.msec.2008.09.007 ↗
26. Porter · 1992 · 229
27. The role of the divorced eutectoid transformation in the spheroidization of 52100 steel10.1007/s11661-000-0188-x ↗
28. Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale10.1016/j.intermet.2006.10.003 ↗
29. On the microsegregation of Ti-45Al-(8-9)Nb-(W, B, Y) alloy10.1016/j.matlet.2006.04.115 ↗
30. Tailoring the microstructure of a β-solidifying TiAl alloy by controlled post-solidification isothermal holding and cooling10.1007/s11661-017-4209-4 ↗
31. Effect of Ta element on microstructure formation and mechanical properties of high-Nb TiAl alloys10.1016/j.intermet.2018.10.017 ↗
32. Application of the divorced eutectoid transformation to the development of fine-grained, spheroidized structures in ultrahigh carbon steels10.1016/0036-9748(84)90397-1 ↗
33. Characterization of phases in Ti-42Al-8Nb alloy at 1200°C10.1016/0956-716X(94)90236-4 ↗
34. Microstructure refinement of a TiAl alloy by heat treatment10.1016/S0921-5093(00)01047-9 ↗