journal article·2023-05

Procedures for microstructurally conditioning an Fe-22Mn-0.6C-1.5Al TWIP steel for optimal mechanical behaviour

M.F. Sklate Boja, M.F. Giordana, J. Malarria, A.V. Druker

Publisher page

Abstract

In this work, we investigate the development of microstructures during thermomechanical processing of an Fe-22Mn-0.6C-1.5Al TWIP steel designed and manufactured in the laboratory, using optical microscopy, transmission electron microscopy and X-ray diffraction. The effect of rolling at room temperature, 600 °C and 1000 °C followed by annealing at intermediate and high temperatures was related to the mechanical properties measured with tensile tests. We found that the selected chemical composition controlled the value of the stacking fault energy, so that the main deformation mechanism was twinning together with dislocation glide, for all sheet-processing conditions. The addition of aluminium eliminated serrations in the stress-strain curves, guaranteeing stable plastic flow of the material during deformation processes. The accumulation of stacking faults during rolling facilitated the formation of an abundance of twins in subsequent anneals. Twin boundaries appear distorted due to dislocation interactions, and these distortions provided nucleation sites for nanometric mechanical twins. This microstructure reduced the mean free path of dislocations, increasing the hardening rate during deformation, which resulted in excellent mechanical properties. Among the thermomechanical processes studied, we found that the sheets rolled at 20 °C and annealed at 750 °C gave a total deformation close to 50% and a maximum strength >1100 MPa, with a yield strength of 350 MPa. This process also produced a small grain size of 7 μm, which is capable of developing a high number of twins during heat treatments and load application. Finally, such a process is a simple and economic procedure, easily adapted to industrial practice.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Hadfield’s manganese steel
2. The role of twinning on microstructure and mechanical response of severely deformed single crystals of high-manganese austenitic steel10.1016/j.matchar.2011.04.010 ↗
3. On deformation behavior of Fe-Mn based structural alloys10.1016/j.mser.2017.09.002 ↗
4. Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip10.1016/S1359-6454(00)00051-3 ↗
5. Deformation of single crystal hadfield steel by twinning and slip10.1016/S1359-6454(99)00383-3 ↗
6. Twinning and strain-induced f.c.c. → h.c.p. transformation on the mechanical properties of CoNiCrMo alloys10.1016/0025-5416(76)90234-2 ↗
7. Properties of austenitic Fe-25Mn-1Al-0.3C alloy for automotive structural applications10.1016/0921-5093(93)90463-O ↗
8. Phase transformations and mechanical properties of Fe-Mn-Si-A1 TRIP-steels
9. High Mn TWIP steels for automotive applications10.5772/14086 ↗
10. Performance and characterization of TWIP steels for automotive applications10.1520/MPC20130009 ↗
11. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
12. On the relationship between work hardening and twinning rate in TWIP steels10.1016/j.msea.2012.01.123 ↗
13. The influence of aluminium content to the stacking fault energy in Fe-Mn-Al-C alloy system10.1007/BF01045392 ↗
14. A general mechanism of martensitic nucleation: part I. general concepts and the FCC→HCP transformation
15. Effects of strain rate on the TRIP–TWIP transition of an austenitic Fe-18Mn-2Si-2Al steel10.1007/s11661-019-05331-9 ↗
16. Driving Force for γ→ ε Martensitic Transformation and SFE of austenite in Fe-Mn binary system10.1007/s11661-000-0271-3 ↗
17. Stacking fault energy maps of Fe-Mn-Al-C-Si steels: effect of temperature, grain size, and variations in compositions10.1115/1.4033632 ↗
18. Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys10.1016/j.msea.2004.01.059 ↗
19. Kinetics of strain-induced martensitic nucleation
20. Is there a relationship between the stacking fault character and the activated mode of plasticity of Fe-Mn-based austenitic steels?10.1016/j.scriptamat.2009.01.040 ↗
21. Constitutive modeling of the tensile behavior of Al-TWIP steel10.1007/s11661-011-0898-2 ↗
22. Modeling of mechanical twinning in a high manganese content austenitic steel10.1016/j.msea.2004.05.038 ↗
23. On the mechanism of twin formation in Fe-Mn-C TWIP steels10.1016/j.actamat.2009.12.032 ↗
24. On the deformation mechanisms in single crystal hadfield manganese steels10.1016/S1359-6462(97)00581-2 ↗
25. De Cooman, stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel10.1016/j.msea.2016.08.106 ↗
26. Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions10.1016/j.msea.2008.09.031 ↗
27. Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
28. Microstructural characterization of high-manganese austenitic steels with different stacking fault energies10.1016/j.matchar.2011.05.011 ↗
29. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
30. Microstructural evolution of a nanotwinned steel under extremely high-strain-rate deformation10.1016/j.actamat.2018.02.062 ↗
31. Effect of strain rate on tensile and serration behaviors of an austenitic Fe-22Mn-0.7C twinning-induced plasticity steel10.1016/j.msea.2017.10.074 ↗
32. Dependence of grain size on mechanical properties and microstructures of high manganese austenitic steel10.1016/j.proeng.2014.09.141 ↗
33. On the relationship between the twin internal structure and the work-hardening rate of TWIP steels10.1016/j.scriptamat.2010.07.016 ↗
34. The effect of grain size on the twin initiation stress in a TWIP steel10.1016/j.actamat.2015.02.008 ↗
35. Strengthening contributions of dislocations and twins in warm-rolled TWIP steels10.1016/j.ijplas.2021.103198 ↗
36. Tailoring extra-strength of a TWIP steel by combination of multi-pass equal-channel angular pressing and warm rolling10.3390/met11030518 ↗
37. Mechanical twinning and texture evolution during asymmetric warm rolling of a high manganese steel10.1016/j.msea.2019.138183 ↗
38. The medium manganese steels: phenomena and industry potentials
39. Temperature dependence of strengthening mechanisms in a twinning-induced plasticity steel10.1016/j.ijplas.2019.01.003 ↗
40. A.S. Hamada, A. Kisko, A. Khosravifard, M.A. Hassan, L.P. Karjalainen, D. Porter, Ductility and formability of three high-Mn TWIP steels in quasi-static and high-speed tensile and Erichsen tests, Mater. Sci. Eng. A 712 (2018) 255–265. https://doi:https://doi.org/10.1016/j.msea.2017.11.111.10.1016/j.msea.2017.11.111 ↗
41. Homogeneously introducing more and thinner nanotwins by engineering annealing twin boundaries : a TWIP steel as an example10.1016/j.msea.2022.142908 ↗
42. Otsuka · 1989 · 451
43. De Cooman · 2012
44. Revealing the mechanical properties and microstructure evolutions of Fe–22Mn–0.6C–(x)Al TWIP steels via Al alloying control10.1016/j.msea.2018.06.037 ↗
45. Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel10.1016/j.actamat.2011.12.004 ↗
46. Effects of Al addition on tensile properties of partially recrystallized austenitic TRIP/TWIP steels10.1016/j.msea.2021.140823 ↗
47. A critical assessment of deformation twinning and epsilon martensite formation in austenitic alloys during complex forming operations10.1016/j.matchar.2018.09.003 ↗
48. The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels10.1016/j.msea.2007.02.074 ↗
49. Characterization of phases in an Fe-Mn-Si-Cr-Ni shape memory alloy processed by different thermomechanical methods10.1016/j.matchar.2015.09.026 ↗
50. Formation of annealing twins in FCC crystals10.1016/S1359-6454(96)00336-9 ↗
51. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
52. Dislocation structures formed during hot and cold working
53. Serrated flow and dynamic strain aging in Fe-Mn-C TWIP steel10.1007/s11661-017-4421-2 ↗
54. Characterisation of the Portevin-Le Châtelier effect affecting an austenitic TWIP steel based on digital image correlation10.1016/j.msea.2010.01.037 ↗
55. Negative to positive transition of strain rate sensitivity in Fe-22Mn-0.6C-x(Al) twinning-induced plasticity steels10.1016/j.msea.2017.02.014 ↗
56. On the mechanism of unstable plastic flow in an austenitic FeMnC TWIP steel10.1016/j.msea.2009.04.067 ↗
57. Stacking fault energy and plastic deformation of fully austenitic high manganese steels: effect of Al addition10.1016/j.msea.2010.02.058 ↗
58. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel10.1016/j.msea.2006.12.170 ↗
59. Controlling mechanical behavior of Twip steels by tuning texture and stacking faults10.1007/s11661-022-06804-0 ↗
60. On the work-hardening behaviour of a high manganese TWIP steel at different deformation temperatures10.1016/j.msea.2016.05.104 ↗
61. The influence of warm rolling on microstructure and deformation behavior of high manganese steels10.3390/met9070797 ↗
62. Modelling of TWIP effect on work-hardening10.1016/S0921-5093(00)02019-0 ↗
63. Microstructure evolution and strengthening mechanisms of Fe-23Mn-0.3C-1.5Al TWIP steel during cold rolling10.1016/j.msea.2014.08.051 ↗
64. Effect of large plastic deformation on microstructure and mechanical properties of a TWIP steel10.1088/1757-899X/63/1/012064 ↗
65. Bhadeshia · 2001
66. The respective hardening contributions of dislocations and twins to the flow stress of a twinning-induced plasticity steel10.1016/j.scriptamat.2015.09.003 ↗
67. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
68. The tensile properties and microstructure evolution of cold-rolled Fe–Mn–C TWIP steels with different carbon contents10.1016/j.msea.2022.142862 ↗
69. On the more persistently-enhanced strain hardening in carbon-increased Fe-Mn-C twinning-induced plasticity steel10.1016/j.msea.2015.05.044 ↗
70. Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels10.1002/srin.201100312 ↗
71. Hardening by transformation and cold working in a Hadfield steel cone crusher liner10.3390/met11060961 ↗
72. Effect of grain size and grain orientation on dislocations structure in tensile strained TWIP steel during initial stages of deformation10.1002/srin.201100308 ↗
73. Revisiting the role of prestrain history in the mechanical properties of ultrafine-grained CoCrFeMnNi high-entropy alloy10.1016/j.msea.2020.140398 ↗
74. The effect of grain size and grain orientation on deformation twinning in a Fe-22wt.% Mn-0.6wt.% C TWIP steel10.1016/j.msea.2010.02.041 ↗
75. A novel ultrafine-grained Fe–22Mn–0.6C TWIP steel with superior strength and ductility10.1016/j.matchar.2016.12.026 ↗
76. Influence of original austenite grain size on tensile properties of a high-manganese transformation-induced plasticity (TRIP) steel10.1016/j.msea.2017.12.107 ↗
77. Effect of hot/warm rolling on the microstructures and mechanical properties of medium-Mn steels10.1016/j.matchar.2020.110682 ↗