journal article·2024-03Open access

From phase decomposition to evaporation: A multi-modal evaluation of thermally degraded model lightweight high-entropy alloy

Intekhab Alam, Moses A. Adaan-Nyiak, Sooyeon Hwang, Kim Kisslinger, Mehmet Topsakal, Ericmoore Jossou, Simerjeet K. Gill, Ahmed A. Tiamiyu

Abstract

Lightweight high-entropy alloys (LHEAs) have the potential to replace conventional lightweight materials due to their superior mechanical properties and thermal stability. However, the thermal degradation pattern of LHEAs from phase decomposition to evaporation is not clear. We develop a new Al-based dual phase (FCC + HCP) LHEA—AlTi0.45CuZn, and further investigate its thermal degradation behavior for potential high-temperature structural applications. Using multimodal advanced characterization techniques such as differential scanning calorimetry/thermogravimetric analysis, scanning/transmission electron microscopy, and synchrotron X-ray diffraction/pair distribution function (XRD/PDF), a sequence of thermal degradation events beyond the thermal phase stability limit—between 250 and 360 °C—is observed. These include phase decomposition at ~360 °C, Zn evaporation at ~750 °C, and LHEA melting at 880 °C which results in ~25% cumulative weight loss. The formation of Al-Ti phase off the AlTi0.45CuZn matrix is due to the largest negative mixing enthalpy for Al-Ti than other binary pairs. Similarly, Zn evaporation from AlTi0.45CuZn LHEA is due to its faster evaporation rate than other constituent elements. The high-resolution synchrotron XRD and PDF results support the aforementioned observations; in addition, they reveal local atomic arrangements, local strain, and sluggish grain growth in the LHEA. Among other LHEAs of close density range (5.55≤ρ≤5.85 g/cc), the investigated LHEA exhibits outstanding nano-indentation hardness values due to the coupled grain size effect and HCP phase strengthening of the FCC matrix. As the search for LHEAs for lightweight applications grows, this study shows the potential use of AlTi0.45CuZn LHEA for structural applications even at elevated temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Recent advances on lightweight high-entropy alloys: process, design, and applications10.1007/s44210-023-00014-y ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Study on a new high-entropy alloy Nd20Pr20La20Fe20Co10Al10 with hard magnetic properties10.1016/j.jallcom.2021.160640 ↗
4. Recent progress in high-entropy alloys10.3166/acsm.31.633-648 ↗
5. Ball milling process variables optimization for high-entropy alloy development using design of experiment and genetic algorithm10.1016/j.powtec.2023.118766 ↗
6. Stability of FeCrNiTiAl high-entropy alloy at high temperature10.1080/25787616.2021.2019390 ↗
7. Exploration and development of high entropy alloys for structural applications10.3390/e16010494 ↗
8. Phase transformations in body-centered cubic NbxHfZrTi high-entropy alloys10.1016/j.matchar.2018.06.012 ↗
9. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
10. Light-weight and flexible high-entropy alloys
11. Structure and properties of lightweight high entropy alloys: a brief review10.1088/2053-1591/aabbca ↗
12. Effects of temper condition on high strain-rate deformation of AA 2017 aluminum alloy in compression10.1016/j.matdes.2015.10.047 ↗
13. A light-weight high-entropy alloy Al20Be20Fe10Si15Ti3510.1007/s11431-017-9073-0 ↗
14. Introduction to Titanium and Titanium alloys
15. Development of a novel light weight Al35Cr14Mg6Ti35V10 high entropy alloy using mechanical alloying and spark plasma sintering10.1016/j.jallcom.2019.153367 ↗
16. Phase stability of low-density, multiprincipal component alloys containing aluminum, magnesium, and lithium
17. Microstructure and mechanical properties of novel Al–cu–mg–Zn lightweight entropy alloys for elevated-temperature applications10.1016/j.matchar.2023.112927 ↗
18. Development of lightweight Al-based entropy alloys for elevated temperature applications10.1016/j.jallcom.2022.168619 ↗
19. Effects of ultrasonic melt treatment and solution treatment on the microstructure and mechanical properties of low-density multicomponent Al70Mg10Si10Cu5Zn5 alloy10.1016/j.jallcom.2016.11.305 ↗
20. Kaufman · 1999
21. Overview of aluminum alloy mechanical properties during and after fires10.1186/s40038-015-0007-5 ↗
22. Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy10.1016/j.matlet.2014.11.162 ↗
23. MgAlSiCrFeNi low-density high entropy alloy processed by mechanical alloying and spark plasma sintering: effect on phase evolution and thermal stability10.1016/j.jallcom.2021.159923 ↗
24. Microstructure and mechanical properties of MgMnAlZnCu high entropy alloy cooling in three conditions10.4028/www.scientific.net/MSF.686.235 ↗
25. Microstructural evolution and thermal stability in a nanocrystalline lightweight TiAlV0.5CrMo refractory high-entropy alloy synthesized by mechanical alloying10.1016/j.matlet.2022.133179 ↗
26. Synthesis of AlFeCuCrMgx (x=0, 0.5, 1, 1.7) alloy powders by mechanical alloying10.1016/j.matchar.2015.10.025 ↗
27. Revisiting the phase stability rules in the design of high-entropy alloys: a case study of quaternary alloys produced by mechanical alloying10.1016/j.intermet.2023.107919 ↗
28. Microstructurally flexible high entropy alloys: linkages between alloy design and deformation behavior10.1016/j.matdes.2020.108968 ↗
29. Insight into the FCC→HCP transformation in co-rich co-Cr-Fe-Mn-Ni high-entropy alloys10.3390/met13030504 ↗
30. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
31. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
32. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity10.1016/j.actamat.2017.07.023 ↗
33. Plastic deformation and strengthening mechanism of FCC/HCP nano-laminated dual-phase CoCrFeMnNi high entropy alloy10.1088/1361-6528/ac2980 ↗
34. PyFAI, a versatile library for azimuthal regrouping10.1088/1742-6596/425/20/202012 ↗
35. Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy10.1016/j.jallcom.2018.10.230 ↗
36. Putz · 2023
37. PDFgetX3: a rapid and highly automatable program for processing powder diffraction data into total scattering pair distribution functions10.1107/S0021889813005190 ↗
38. ASTM · 2011 · 1
39. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
40. Effects of process control agent amount, milling time, and annealing heat treatment on the microstructure of alcrcufeni high-entropy alloy synthesized through mechanical alloying10.3390/met11091493 ↗
41. Diffusion kinetics in solids
42. Effects of milling process parameters and PCAs on the synthesis of Al0.8Co0.5Cr1.5CuFeNi high entropy alloy powder by mechanical alloying10.1016/j.matdes.2022.110637 ↗
43. NIH image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
44. Phase stability of AlCoTiZn high-entropy alloy prepared by mechanical alloying10.1007/s11665-022-07332-z ↗
45. Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography10.1016/j.actamat.2013.04.059 ↗
46. Mechanistic origin of abnormal annealing-induced hardening in an AlCoCrFeNi2.1 eutectic multi-principal-element alloy10.1016/j.actamat.2023.118905 ↗
47. A development of Ti-based bulk metallic glass10.1016/j.msea.2003.10.115 ↗
48. Evolution of phase stability and structural properties in CrFeNiTiV high-entropy alloy under high-temperature heat treatment conditions10.1016/j.msea.2023.145680 ↗
49. Synthesis of the Supermalloy powders by mechanical alloying10.1023/B:JMSC.0000039234.58490.78 ↗
50. Calorimetric measurements of grain growth in ultrafine-grained nickel
51. Consideration of kinetics on intermetallics formation in solid-solution high entropy alloys10.1016/j.actamat.2020.05.015 ↗
52. Phase evolution and thermal stability of low-density MgAlSiCrFe high-entropy alloy processed through mechanical alloying10.1007/s12666-020-02039-y ↗
53. Mechanism of mechanical alloying phase formation and related magnetic and mechanical properties in the Fe-Si system10.1016/0925-8388(93)90159-K ↗
54. Microstructure evolution in a nanocrystalline CoCrFeNi multi-principal element alloy during annealing10.1016/j.matchar.2020.110807 ↗
55. Dual-phase high-entropy alloys for high-temperature structural applications10.1016/j.jallcom.2017.09.089 ↗
56. Phase stability of a light-weight AlNb2TiV refractory high-entropy alloy at high temperature10.1016/j.matlet.2022.132897 ↗
57. A novel low-density semi-hard magnetic Al20Fe20Mg20Ni20Ti20 high entropy alloy10.1016/j.jmmm.2020.167342 ↗
58. On the Kissinger equation and the estimate of activation energies for non-isothermal cold crystallization of PET10.1016/j.polymertesting.2014.08.008 ↗
59. Concurrence of spinodal decomposition and nano-phase precipitation in a multi-component AlCoCrCuFeNi high-entropy alloy10.1016/j.jmrt.2018.04.020 ↗
60. Characterization of BCC phases in AlCoCrFeNiTix high entropy alloys10.1016/j.matlet.2014.09.100 ↗
61. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
62. Analysis of multicomponent evaporation in electron beam melting and refining of titanium alloys10.1007/s11663-997-0078-3 ↗
63. Alloying element vaporization during laser spot welding of stainless steel10.1088/0022-3727/36/23/033 ↗
64. Vacuum sintering
65. Inhibition of K2SO4 on evaporation of KCl in combustion of herbaceous biomass10.1016/j.fuel.2020.119754 ↗
66. The rise of the X-ray atomic pair distribution function method: a series of fortunate events10.1098/rsta.2018.0413 ↗
67. Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy10.1016/j.apt.2014.03.014 ↗
68. Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy10.1016/j.actamat.2019.07.052 ↗
69. A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures10.1080/21663831.2014.985855 ↗
70. Alloying and thermal behaviour of CoCrFeNiMn 0.5 Ti 0.5 high-entropy alloy synthesised by mechanical alloying10.1179/1743284715Y.0000000124 ↗
71. In situ TEM study of grain growth in nanocrystalline copper thin films10.1088/0957-4484/21/14/145701 ↗
72. Grain growth and kinetics for nanocrystalline magnesium alloy produced by mechanical alloying10.1016/S0025-5408(01)00578-5 ↗
73. Effect of composition on structural and magnetic properties of nanocrystalline ball milled Ni1−xZnxFe2O4 ferrite10.1016/j.physb.2009.09.044 ↗
74. Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system10.1016/j.msea.2021.141775 ↗
75. Local ordering in disordered NdxZr1-xO2-0.5x pyrochlore as observed using neutron total scattering10.1016/j.actamat.2021.117590 ↗
76. Structural inheritance and difference between Ti 2 AlC, Ti 3 AlC 2 and Ti 5 Al 2 C 3 under pressure from first principles10.1142/S0217984917500166 ↗
77. The Materials Project · 2020
78. The Materials Project · 2020
79. The Materials Project · 2020
80. The Materials Project · 2020
81. The Materials Project · 2017
82. EXAFS and DFT studies of microscopic structure with different density upon Zn(II) adsorption on anatase TiO210.1007/s10450-013-9510-y ↗
83. Microstructural evolution and strengthening mechanisms in CrxMnFeNi high-entropy alloy10.1016/j.jmrt.2021.04.020 ↗
84. Creating heterogeneous lamella structure in a multiphase Al-Cr-Fe-co-Ni complex concentrated alloy10.1016/j.msea.2022.144150 ↗
85. Correlation between nanoindentation and tensile propertiesInfluence of the indentation size effect10.1016/S0921-5093(03)00563-X ↗
86. Grain-size dependent mechanical behavior of nanocrystalline metals10.1016/j.msea.2015.07.075 ↗
87. Inverse hall-Petch relationship of high-entropy alloy by atomistic simulation10.1016/j.matlet.2020.128024 ↗
88. Grain boundary relaxation strengthening of nanocrystalline Ni-W alloys10.1557/jmr.2012.55 ↗
89. Combinatorial development of the low-density high-entropy alloy Al10Cr20Mo20Nb20Ti20Zr10 having gigapascal strength at 1000 °C10.1016/j.jallcom.2020.155700 ↗
90. Microstructure and mechanical properties of borided CoCrFeNiAl0.25Ti0.5 high entropy alloy produced by powder metallurgy10.1016/j.vacuum.2020.109820 ↗
91. Microstructure development and mechanical performance of Al2CrFeMnTi light-weight high entropy alloy10.1016/j.intermet.2021.107376 ↗
92. Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength10.1016/j.jallcom.2018.11.057 ↗
93. Investigating the elastic modulus and hardness properties of a high entropy alloy coating using nanoindentation
94. Irradiation damage versus lattice distortion in AlNbTiVCrx (x = 0, 0.5, 1) high-entropy alloys from first-principles calculations and irradiation experiments10.1016/j.jnucmat.2022.153630 ↗
95. Compositional design of strong and ductile (tensile) Ti-Zr-Nb-ta medium entropy alloys (MEAs) using the atomic mismatch approach10.1016/j.msea.2018.11.054 ↗
96. Ultrahigh hardness and biocompatibility of high-entropy alloy TiAlFeCoNi processed by high-pressure torsion10.1016/j.msec.2020.110908 ↗
97. 2022