journal article·2024-01

Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites

Zhenyu Liu, Cunsheng Zhang, Jun Yan, Zijie Meng, Liang Chen, Guoqun Zhao

Publisher page

Abstract

Heat treatment is one of the most effective strategies for regulating microstructure and enhancing the mechanical properties of aluminum matrix composites. In this work, the effects of solution treatment on the static recrystallization behavior, characteristics of secondary phases dissolving, and mechanical response of carbon nanotubes reinforced aluminum matrix composites (CNT/2024Al) were systematically investigated using transmission Kikuchi diffraction (TKD) and transmission electron microscopy (TEM). Since plenty of deformation stored energy in as-extruded composites is consumed, the residual energy is insufficient to induce static recrystallization during solution treatment. Besides, various interfacial phases aggregated around the Al 2Cu phases, which reduced the effective contact area between the Al 2 Cu phases and matrix, and severely hindered the dissolution process of the Al 2 Cu phases. The yield strength, tensile strength, and elongation of as-solution treated composites were 23.2%, 44.9%, and 23.0% higher than those of as-extruded composites, respectively. The enhanced yield strength is attributed to solid solution strengthening induced by the dissolution of secondary phases, thermal mismatch strengthening, and the strengthening originating from the formation of Al 4C 3 phases.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. In-situ TEM study on the effect of stacking faults on micro-plasticity and proportional limit in SiC/Al composites10.1016/j.compositesb.2022.110180 ↗
2. Superior high-temperature tensile properties of aluminum matrix composites reinforced with carbon nanotubes10.1016/j.carbon.2022.02.009 ↗
3. Microstructure evolution, mechanical properties and strengthening mechanisms in the hot extruded Si3N4 particle reinforced Al–Cu–Mg composite10.1016/j.msea.2022.143516 ↗
4. Microstructure and mechanical properties of Al matrix composite reinforced with micro/nano-sized yttrium oxyfluoride10.1016/j.msea.2022.143820 ↗
5. Micro−/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure10.1016/j.jmrt.2023.05.204 ↗
6. Interface and strengthening mechanisms of Al matrix composites reinforced with in-situ CNTs grown on Ti particles10.1016/j.matdes.2023.111923 ↗
7. A comprehensive review on CNTs and CNT-reinforced composites: syntheses, characteristics and applications
8. Effect of thermomechanical treatment and length-scales on spatial distribution of CNTs in Al matrix10.1016/j.carbon.2022.01.024 ↗
9. Understanding the influencing mechanism of CNTs on the microstructure and mechanical properties of semi-solid stir casting Al-Cu-Mg alloys10.1016/j.jmrt.2022.04.087 ↗
10. Laser additive manufacturing of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites: processing optimization, microstructure evolution and mechanical properties
11. Deformation behavior and strengthening mechanisms in a CNT-reinforced bimodal-grained aluminum matrix nanocomposite10.1016/j.msea.2021.141370 ↗
12. Enhanced strength–ductility synergy of carbon nanotube/Al–Cu–Mg composites via introducing laminate structure and grain modification10.1016/j.compositesb.2022.110178 ↗
13. Enhanced interfacial bonding and mechanical properties in CNT/Al composites fabricated by flake powder metallurgy10.1016/j.carbon.2018.01.037 ↗
14. Enhanced mechanical properties of CNT/Al composite through tailoring grain interior/grain boundary affected zones10.1016/j.compositesb.2021.109133 ↗
15. Enhanced precipitate strengthening in particulates reinforced Al–Zn–Mg–Cu composites via bimodal structure design and optimum aging strategy10.1016/j.compositesb.2023.110772 ↗
16. Achieving excellent strength of the LPBF additively manufactured Al–Cu–Mg composite via in-situ mixing TiB2 and solution treatment10.1016/j.msea.2022.143531 ↗
17. Aging behavior of ultrafine-grained AA6063/SiC composites with varying reinforcement sizes10.1016/j.msea.2019.138482 ↗
18. Effects of nanosized particles on microstructure and mechanical properties of an aged in-situ TiB2/Al-Cu-Li composite10.1016/j.msea.2018.11.032 ↗
19. Heat treatment behavior and strengthening mechanisms of CNT/6061Al composites fabricated by flake powder metallurgy10.1016/j.matchar.2019.05.017 ↗
20. Aging behavior of a 2024 Al alloy-SiCp composite10.1016/j.matdes.2009.11.063 ↗
21. Effects of nanoparticles on the solution treatment and mechanical properties of nano-SiCp/Al-Cu composites10.1016/j.jmatprotec.2021.117195 ↗
22. Influence of solution temperature on microstructure and properties of in-situ TiB2/2009 composites10.1016/j.msea.2015.03.037 ↗
23. The solution treatment of in-situ sub-micron TiB2/2024 Al composite10.1016/j.matdes.2016.03.024 ↗
24. Effect of solution temperature on aging behavior and properties of SiCp/Al-Cu-Mg composites10.1016/j.msea.2010.10.075 ↗
25. Effects of solution treatment on tensile properties and strengthening mechanisms of SiCp/6061Al composites fabricated by powder thixoforming10.1016/j.matdes.2016.03.068 ↗
26. Effects of solid solution treatment on microstructure and mechanical properties of SiCp/2024 Al composite: a comparison with 2024 Al alloy10.1016/j.msea.2021.141413 ↗
27. The Portevin-Le Chatelier (PLC) effect in an Al-Cu aluminum alloy fabricated by selective laser melting10.1016/j.matchar.2021.111198 ↗
28. Natural aging behaviors of Al-Cu-Li alloy: PLC effect, properties and microstructure evolution10.1016/j.matchar.2021.111694 ↗
29. The anisotropy of serrated flow behavior of Al-Cu-Li (AA2198) alloy10.1007/s11661-019-05431-6 ↗
30. Constitutive modeling of flow stress and work hardening behavior while considering dynamic strain aging10.1016/j.mtla.2021.101137 ↗
31. Establishment of a facile technique to fabricate bulk AA6061/CNT composite with improved mechanical properties using combined stir-casting and squeeze-casting
32. Microstructure evolution of the TiB2/Al composites fabricated by powder metallurgy during hot extrusion10.1016/j.matchar.2019.109834 ↗
33. Additively manufactured Ti–6Al–4V alloy by high magnetic field heat treatment10.1016/j.msea.2023.144926 ↗
34. Effectively reinforced load transfer and fracture elongation by forming Al4C3 for in-situ synthesizing carbon nanotube reinforced Al matrix composites10.1016/j.msea.2018.01.065 ↗
35. Micro/nano-reinforcements in bimodal-grained matrix: A heterostructure strategy for toughening particulate reinforced metal matrix composites10.1016/j.scriptamat.2022.114774 ↗
36. Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum10.1016/j.actamat.2006.06.031 ↗
37. Simulation study of effects of initial particle size distribution on dissolution10.1016/j.actamat.2008.09.010 ↗
38. Strengthening in nanostructured 2024 aluminum alloy and its composites containing carbon nanotubes10.1016/j.compositesa.2011.06.008 ↗
39. Dislocation ordering and texture strengthening of naturally aged Al-Cu-Mg alloy10.1016/j.jmst.2021.12.011 ↗
40. Interface and interfacial reactions in multi-walled carbon nanotube-reinforced aluminum matrix composites10.1016/j.carbon.2015.10.016 ↗
41. Localized stress near and the thermal expansion of Al2Cu precipitates in an Al thin film matrix10.1063/1.371926 ↗
42. Aging responses of an Al-Cu alloy fabricated by selective laser melting
43. Achieving simultaneous enhancement of strength and ductility in Al matrix composites by employing the synergetic strengthening effect of micro- and nano-SiCps10.1016/j.compositesb.2022.110350 ↗