journal article·2023-06

Effect of homogenization temperature on microstructural homogeneity and mechanical properties of twin-roll casted 8006 aluminum alloy

Tao Jin, Hedao Xiao, Lipeng Ding, Xingyu Zhao, Xiuchuan Lei, Baowei Wan, Yaoyao Weng, Zhihong Jia, Qing Liu

Publisher page

Abstract

The effect of homogenization process on the microstructures and mechanical properties of the twin-roll casted (TRC) 8006 alloy strip during various thermomechanical processing was systematically studied by optical microscope, tensile testing, scanning electron microscopy (SEM) and electron backscattered diffraction (EBSD) characterizations. The results show that the coarse-grained layer is easily activated at the strip surface due to the severe microstructure gradient throughout the entire strip, which is related to the accumulation of high storage energy at the strip surface. With the increasing homogenization temperature, the coarse-grained layer increases and the dendrite network generally dissolves, broken and spheroidized, which produce a fully recrystallized grains with discrete distributed second phase particles after homogenization at 580 °C. After cold rolling and final annealing, depending on the homogenization temperatures, the 1 mm sheets exhibit three- or five- layer sandwich structure. This phenomenon is mainly caused by the uneven distribution of second phase particles and deformation levels at the surface and center regions of the sheets. Increasing the homogenization temperature can reduce the tensile strength but increase the elongation of the 1 mm annealed sheet due to the different grain and second phase distributions. Homogenization of 540 °C/3 h is selected as the optimum process as it provides good combination of high strength, good elongation and rather thin coarse-grained layer.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Twin-roll casting of aluminum alloys - an overview10.1080/10426914.2014.912307 ↗
2. Microstructure property relationships in O-temper foil alloys10.1007/BF03222965 ↗
3. Study of the damage of AA 8006 twin-roll cast thin sheets during forming of heat exchanger fins10.4028/www.scientific.net/MSF.331-337.619 ↗
4. Micrornodel of simulation on twin-roll continuous casting thin strip solidification structure10.1016/S1875-5372(13)60029-6 ↗
5. Twin roll casting of aluminium alloys10.1016/S0921-5093(99)00676-0 ↗
6. Aluminum alloy semisolid strip casting using an unequal diameter twin roll caster
7. Near-surface microstructure on twin-roll cast 8906 aluminum alloy10.1007/s11661-015-2877-5 ↗
8. Microstructural evolution of twin-roll-cast Al-Mn alloy during cold rolling and subsequent annealing: effect of number of cold-rolling passes10.1016/j.jallcom.2019.05.045 ↗
9. The effects of cell spacing and distribution of intermetallic fibers on the mechanical properties of hypoeutectic Al-Fe alloys10.1016/j.matchemphys.2009.08.063 ↗
10. Investigation of intermetallics in hypoeutectic Al-Fe alloys by dissolution of the Al matrix10.1016/j.intermet.2009.03.003 ↗
11. Simulation of the casting and homogenization of two 6xxx series alloys10.4028/www.scientific.net/MSF.396-402.209 ↗
12. Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al-Mn-Fe-Si alloy10.1016/j.matchar.2015.02.015 ↗
13. The effect of heating rate on the softening behaviour of a deformed Al-Mn alloy with strong and weak concurrent precipitation10.1016/j.matchar.2015.10.033 ↗
14. Effect of precipitation on the evolution of cube recrystallisation texture10.1016/S1359-6454(97)00157-2 ↗
15. Response to annealing treatment of a twin-roll cast thin AlFeMnSi strip10.1016/j.jmatprotec.2008.02.019 ↗
16. Processing of twin-roll cast thin AlFeSi strips for the manufacture of aluminium finstock10.1051/metal/2017008 ↗
17. Thermomechanical processing of a twin-roll cast Al-1Fe-0.2Si alloy10.1016/j.jmatprotec.2007.09.047 ↗
18. Homogenization of twin-roll cast A8006 alloy10.1016/S1003-6326(11)61316-2 ↗
19. Microstructural evolution in twin roll cast AA3105 during homogenization10.1016/j.msea.2005.10.018 ↗
20. Influence of pre-recovery on the subsequent recrystallization and mechanical properties of a twin-roll cast Al-Mn alloy10.1016/j.msea.2016.11.018 ↗
21. Effect of homogenization treatment and silicon content on the microstructure and hot workability of dilute Al-Fe-Si alloys10.1016/j.msea.2014.09.072 ↗
22. Influence of cold rolled deformation degree and heating rates on crystallite dimension and recrystallization fraction of aluminum plates10.3390/cryst11111428 ↗
23. Recrystallization in commercially pure aluminum10.1007/BF02645114 ↗
24. Effect of second phase particles and stringers on microstructures after rolling and recrystallization10.1016/j.msea.2018.08.040 ↗
25. Işıksaçan · 2015 · 1219
26. Patel · 2019 · 351
27. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
28. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
29. The cleavage strength of polycrystals
30. Influence of predeformation and ageing of an Al-Zn-Mg alloy - II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
31. Improving the comprehensive mechanical property of the rheo-extruded Al-Fe alloy by severe rolling deformation10.1016/j.jmrt.2019.12.008 ↗