Formation of omega phase induced by laser shock peening in Ti-17 alloy
Source abstract
Abstract
Abstract Synchrotron-based high-energy X-ray diffraction and transmission electron microscopy were used to study the in-depth compressive residual strains and microstructure evolution in Ti-17 alloy subjected to two-sided laser shock peening (LSP). A noticeable difference was observed in the lattice strains and extents of peak broadening on the two sides of the sample. The compressive residual strain was smaller and the peak broadening was more pronounced on the bottom surface in comparison to the top surface. This is due to the β → ω phase transformation induced by LSP on the bottom surface. It was determined that the ω phase with fine particle morphology and incommensurate structure is located mainly in the 15 μm-thick layer under the bottom surface. The formation of the LSP-induced ω phase on the bottom surface can be attributed to the adiabatic increase in temperature due to the higher shock peak pressure on the bottom surface, and can result in the relaxation of the accumulated residual compressive strain in the original phases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Leyens · 2003
2. Fatigue crack nucleation and growth rate behavior of laser shock peened titanium10.1016/S0142-1123(99)00072-9 ↗
3. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys10.1016/j.msea.2011.12.072 ↗
4. Effect study and application to improve high cycle fatigue resistance of TC11 titanium alloy by laser shock peening with multiple impacts10.1016/j.surfcoat.2014.05.015 ↗
5. Laser shock processing and its effects on microstructure and properties of metal alloys: a review10.1016/S0142-1123(02)00022-1 ↗
6. Compound technology of manufacturing and multiple laser peening on microstructure and fatigue life of dual-phase spring steel10.1016/j.msea.2016.08.031 ↗
7. Laser shock peening without coating induced residual stress distribution, wettability characteristics and enhanced pitting corrosion resistance of austenitic stainless steel10.1016/j.apsusc.2017.09.138 ↗
8. On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 degrees C10.1016/j.ijfatigue.2012.03.008 ↗
9. Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts10.1016/j.actamat.2017.01.050 ↗
10. Altering the wetting properties of orthopaedic titanium alloy (Ti–6Al–7Nb) using laser shock peening10.1016/j.jallcom.2019.06.104 ↗
11. Microstructure characteristics and formation mechanism of TC17 titanium alloy induced by laser shock processing10.1016/j.jallcom.2017.06.127 ↗
12. Strengthening of titanium alloys by shock deformation
13. Mechanical response and effects of β-to-α″ phase transformation on the strengthening of Ti–10V–2Fe–3Al during one-dimensional shock loading10.1016/j.msea.2012.10.098 ↗
14. Affect of shock-induced phase transformations on dynamic strength of titanium alloys10.1016/S0734-743X(01)00105-1 ↗
15. The α–ω phase transition in shock-loaded titanium10.1063/1.4987146 ↗
16. Shock-induced deformation twinning and omega transformation in tantalum and tantalum–tungsten alloys10.1016/S1359-6454(00)00287-1 ↗
17. Formation of a shock deformation induced ω phase in Zr 20 Nb alloy10.1016/j.actamat.2004.07.008 ↗
18. Deformation of a Ti-Nb alloy containing α″-martensite and omega phases10.1063/1.4916960 ↗
19. Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel10.1016/S1359-6454(02)00021-6 ↗
20. Evolution of lattice strain in Ti–6Al–4V during tensile loading at room temperature10.1016/j.actamat.2008.08.030 ↗
21. Experiment investigation on microstructure and mechanical properties of TC17 titanium alloy treated by laser shock peening with different laser fluence10.2351/1.4800444 ↗
22. The omega phase transformation in titanium alloys as an example of displacement controlled reactions10.1016/0001-6160(71)90047-2 ↗
23. An electron diffraction investigation of the diffuse ω structure in quenched Ti-3d transition metal alloys10.1016/0956-7151(94)90141-4 ↗
24. β Phase decomposition in Ti–5Al–5Mo–5V–3Cr10.1016/j.actamat.2009.04.031 ↗
25. Omega phase in materials10.1016/0079-6425(82)90002-0 ↗
26. Laser shock peening of Ti-17 titanium alloy: influence of process parameters10.1016/j.msea.2011.10.104 ↗
27. Laser shock processing: a review of the physics and applications10.1007/BF00326477 ↗
28. Physical study of laser-produced plasma in confined geometry10.1063/1.346783 ↗
29. FEM simulation of two sided laser shock peening of thin sections of Ti-6Al-4V alloy10.1179/026708403225002568 ↗
30. Laser shock processing as a surface enhancement process10.4028/www.scientific.net/KEM.197.121 ↗
31. Numerical simulation of plasma dynamics in laser shock processing experiments10.1016/j.apsusc.2008.09.067 ↗
32. Effect of multipath laser shock processing on microhardness, surface roughness, and wear resistance of 2024-T3 Al alloy10.1155/2014/490951 ↗
33. Experimental study of laser-driven shock waves in stainless steels10.1063/1.368894 ↗
34. Physics and applications of laser-shock processing10.2351/1.521861 ↗
35. The stress-induced omega phase transformation in Ti-V alloys10.1007/BF02642306 ↗
36. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
37. Deformation behaviour of retained β phase inβ-eutectoid Ti-Cr alloys10.1007/BF01106518 ↗
38. Transmission electron microscopic observations of mechanical twinning in metastable beta titanium alloys10.1007/BF02650122 ↗
39. Nucleation behaviour of β to ω phase transformations in β-type Ti-Mo alloys10.2320/matertrans.MB201017 ↗
40. Origin of shear induced β to ω transition in Ti–Nb-based alloys10.1016/j.actamat.2015.03.040 ↗
41. Effect of deformation-induced ω phase on the mechanical properties of metastable β-type Ti-V alloys10.2320/matertrans.M2012116 ↗
42. Athermal and deformation-induced ω-phase transformations in biomedical beta-type alloy Ti–9Cr–0.2O10.1016/j.actamat.2016.01.008 ↗
43. Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy10.1016/j.actamat.2015.11.026 ↗
44. Generation of shock waves by laser-induced plasma in confined geometry10.1063/1.354710 ↗
45. Omega phase transformation – morphologies and mechanisms
46. Influence of the ageing conditions and the initial microstructure on the precipitation of α phase in Ti-17 alloy10.1016/j.jallcom.2018.04.302 ↗