journal article·2024-01

Effect of Al element on microstructure, mechanical properties and damping capacity of LPSO-containing Mg-Y-Zn-Li alloy

Di Zhao, Xianhua Chen, Wenjun Ci, Chunquan Liu, Fusheng Pan

Publisher page

Abstract

A novel LPSO containing Mg-5Y-2n-2Li-0.5Al alloy with superior mechanical behaviors and damping capacities was first developed in this paper. The microstructure evolution, mechanical and damping properties of Mg-5Y-2n-2Li-0.5Al alloy were analyzed and compared with those of Mg-5Y-2Zn-2Li alloy. The results indicated the extruded Mg-5Y-2n-2Li-0.5Al alloy exhibited bimodal grain structure, including fine dynamically recrystallized grains (DRXed grains) and coarse un-dynamically recrystallized (unDRXed) grains, accompanied by the produce of the 14H LPSO phase, Al 3 (Y, Zn) particle and nano-precipitates AlLi phase. Due to the strengthening effects of grain boundary, residual dislocation and precipitation, the ultimate tensile strength (UTS), tension yield strength (TYS) and elongation (EL) of the extruded Mg-5Y-2Zn-2Li-0.5Al alloy were 312 MPa, 229 MPa and 10.9%, respectively, which were higher than that those of the extruded Mg-5Y-2Zn-2Li alloy. In addition, the extruded Mg-5Y-2Zn-2Li-0.5Al alloy displayed good damping capacities at both room and high temperature (RT and HT), and its RT damping value (Q −1) at 5 × 10 −4 strain amplitude exceeded 0.01, which associated with a high density of movable dislocation. With rising the temperature, the extruded Mg-5Y-2n-2Li-0.5Al alloy possessed superior damping properties than the Al-free alloy, which derived from the grain boundary slide (GBS) and the activation of the incoherent interface between the Al 3(Y, Zn) and α-Mg phase after adding Al element.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - a review10.1016/j.jma.2022.09.003 ↗
2. Recent progress and perspectives in additive manufacturing of magnesium alloys10.1016/j.jma.2022.03.001 ↗
3. Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness10.1016/j.msea.2022.143901 ↗
4. Altered age-hardening behavior in the ultrafine-grained surface layer of Mg-Zn-Y-Ce-Zr alloy processed by sliding friction treatment10.1016/j.jmst.2020.11.017 ↗
5. Improved mechanical property and internal friction of pure Mg processed by ECAP10.1016/j.msea.2012.07.031 ↗
6. Simultaneous improvement of strength and damping capacities of Mg-8Li-6Y-2Zn alloy by heat treatment and hot rolling10.1016/j.jallcom.2022.167027 ↗
7. A study of damping capacities in pure Mg and Mg-Ni alloys10.1016/j.scriptamat.2005.01.048 ↗
8. A study of the effect of Y on the mechanical properties, damping properties of high damping Mg-0.6%Zr based alloys10.1016/j.msea.2009.03.059 ↗
9. High damping properties of Mg-Si binary hypoeutectic alloys10.1016/j.matlet.2008.10.056 ↗
10. Effects of nanoprecipitates and LPSO structure on deformation and fracture behaviour of high-strength Mg-Gd-Y-Zn-Mn alloys10.1016/j.matchar.2020.110396 ↗
11. Compressive deformation of as-extruded LPSO-containing Mg alloys at different temperatures10.1016/j.jmrt.2021.12.053 ↗
12. Achieving ultra-high strength in Mg-Gd-Ag-Zr wrought alloy via bimodal-grained structure and enhanced precipitation10.1016/j.jmst.2020.04.031 ↗
13. Microstructure and mechanical properties of Mg-Gd-Y-Zn-Mn alloy sheets processed by large-strain high-efficiency rolling10.1016/j.msea.2019.01.080 ↗
14. Low-frequency damping properties of as-extruded Mg–11.2Li–0.95Al–0.43Zn magnesium alloy10.1016/j.msea.2011.04.047 ↗
15. Unveiling the rolling texture variations of α-Mg phases in a dual-phase Mg-Li alloy
16. Development of a novel Mg-Y-Zn-Al-Li alloy with high elastic modulus and damping capacity10.1016/j.msea.2020.139744 ↗
17. Effects of Li on microstructures, mechanical, and biocorrosion properties of biodegradable Mg94-xZn2Y4Lix alloys with long period stacking ordered phase10.1002/adem.201600606 ↗
18. Effect of Al content on microstructure and mechanical properties of as-cast Mg-5Nd alloys10.1016/j.jallcom.2017.11.143 ↗
19. A rolled Mg-8Al-0.5Zn-0.8Ce alloy with high strength-ductility synergy via engineering high-density low angle boundaries10.1016/j.jma.2021.12.008 ↗
20. Microstructure, texture and mechanical properties of the rolled high modulus Mg-Y-Zn-Al-Li alloy10.1016/j.msea.2021.142242 ↗
21. The 18R and 14H long-period stacking ordered structures in Mg-Y-Zn alloys10.1016/j.actamat.2010.01.022 ↗
22. Microstructure evolution, damping capacities and mechanical properties of novel Mg-xAl-0.5Ce (wt%) damping alloys10.1016/j.jallcom.2017.09.193 ↗
23. Tailoring good combinations among strength, ductility and damping capacity in a novel Mg-1.5Gd-1Zn damping alloy via hot extrusion10.1016/j.msea.2023.144827 ↗
24. Effect of substitution of minor Nd for Y on mechanical and damping properties of heat-treated Mg-Zn-Y-Zr alloy10.1016/j.msea.2015.11.023 ↗
25. Effect of extrusion plus rolling on damping capacity and mechanical properties of Mg-Y-Er-Zn-Zr alloy10.1016/j.msea.2021.142298 ↗
26. Effects of Y and Zn on mechanical properties and damping capacity of Mg-Cu-Mn alloy10.1016/S1003-6326(09)60384-8 ↗
27. Effects of extrusion on the mechanical properties and damping capacity of Mg-1.8Cu-0.5Mn alloy10.4028/www.scientific.net/MSF.546-549.257 ↗
28. Mechanical properties and damping behavior of magnesium alloys processed by equal channel angular pressing10.4028/www.scientific.net/MSF.539-543.1685 ↗
29. Effects of solid solution elements on damping capacities of binary magnesium alloys10.1016/j.msea.2019.138707 ↗
30. Effect of extrusion parameters on microstructure, mechanical properties and damping capacities of Mg-Y-Zn-Zr alloy10.1016/j.jallcom.2022.168122 ↗
31. Long-period ordered structure in a high-strength nanocrystalline Mg-1at.%Zn-2at.% Y alloy studied by atomic-resolution Z-contrast STEM10.1016/S1359-6454(02)00191-X ↗
32. Effects of spheroidizing treatment on the dynamic recrystallization behavior and yield asymmetry of an extruded Mg94Zn2.5Y2.5Mn1 alloy10.1016/j.msea.2018.11.089 ↗
33. The role of metastable LPSO building block clusters in phase transformations of an Mg-Y-Zn alloy10.1016/j.actamat.2016.04.016 ↗
34. Evolution of LPSO phases and their effect on dynamic recrystallization in a Mg-Gd-Y-Zn-Zr alloy10.1007/s11661-017-4081-2 ↗
35. Formation and mechanical properties of Mg97Zn1RE2 alloys with long-period stacking ordered structure10.2320/matertrans.MER2007142 ↗
36. Basal-plane stacking-fault energies of Mg alloys: a first-principles study of metallic alloying effects10.1016/j.jmst.2018.02.009 ↗
37. Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases10.1016/j.msea.2020.139934 ↗
38. The effect of 14H LPSO phase on dynamic recrystallization behavior and hot workability of Mg-2.0Zn-0.3Zr-5.8Y alloy10.1016/j.msea.2014.01.079 ↗
39. Effects of 14H LPSO phase on the dynamic recrystallization and work hardening behaviors of an extruded Mg–Zn–Y–Mn alloy10.1016/j.msea.2020.140727 ↗
40. Role of second phases and grain boundaries on dynamic recrystallization behavior in ZK60 magnesium alloy10.1016/j.jallcom.2020.157958 ↗
41. Grain refinement mechanism of Mg-3Sn-1Mn-1La alloy during accumulative hot rolling10.1016/j.jmst.2021.02.052 ↗
42. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets10.1016/j.msea.2017.05.110 ↗
43. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
44. Transmission electron microscopy investigation of dislocations in Mg and a-solid solution Mg-Li alloys10.1007/s11661-002-0154-x ↗
45. Effect of Li content on microstructure, texture and mechanical properties of cold rolled Mg-3Al-1Zn alloy10.1016/j.msea.2015.02.023 ↗
46. Transmission electron microscopy investigation of dislocation slip during superelastic cycling of Ni-Ti wires10.1016/j.ijplas.2010.05.005 ↗
47. Modeling the precipitation processes and strengthening mechanisms in a Mg-Al-(Zn) AZ91 alloy10.1007/s11661-005-0330-x ↗
48. A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing10.1016/j.scriptamat.2012.02.008 ↗
49. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
50. Effect of precipitate shape on slip and twinning in magnesium alloys10.1016/j.actamat.2010.11.060 ↗
51. Bimodal microstructure evolution and strength-ductility co-enhancement of hot-extruded Al-La-Mg-Mn alloy10.1016/j.msea.2022.144195 ↗
52. Simultaneous improvement of strength and ductility in ZK60 magnesium alloy by constructing the bimodal grain structure10.1016/j.jmrt.2022.12.002 ↗
53. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
54. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
55. Application of dislocation theory to internal friction phenomena at high frequencies10.1063/1.1722485 ↗
56. Theory of mechanical damping due to dislocations10.1063/1.1722436 ↗
57. Hirth · 1982
58. Numerical analysis of cooling rate dependence on dislocation density in multicrystalline silicon for solar cells10.1016/j.jcrysgro.2010.11.009 ↗
59. An optical microscopy study of dislocations in multicrystalline silicon grown by directional solidification method10.1016/j.mssp.2010.12.006 ↗
60. Effect of precipitates on mechanical and damping properties of Mg-Zn-Y-Nd alloys10.1016/j.msea.2015.04.092 ↗
61. Enhanced damping capacities of Mg-Ce alloy by the special microstructure with parallel second phase10.1016/j.jmst.2016.06.027 ↗
62. Effects of heat treatment on microstructure, mechanical properties and damping capacity of Mg-Zn-Y-Zr alloy10.1016/j.msea.2013.11.019 ↗
63. Simultaneously improving elastic modulus and damping capacity of extruded Mg-Gd-Y-Zn-Mn alloy via alloying with Si10.1016/j.jallcom.2019.151857 ↗