journal article·2023-10

Study on fatigue crack propagation behavior of 2050 Al Li alloy during non-isothermal aging

Yao Li, Guofu Xu, Guangyi Guo, Shichao Liu, Xiaoyan Peng

Publisher page

Abstract

The fatigue crack propagation behavior of 2050Al Li alloy at different stages during non-isothermal aging (NIA) was tested. It was found that when the aging temperature was reduced to 150 °C, the alloy exhibited higher fatigue crack growth resistance and lower fatigue crack growth rate and the fatigue crack growth path was mainly transgranular propagation in different stages of NIA. In addition, in the first stage of fatigue crack growth, the size and quantity of precipitates in the grain are the main factors affecting the crack growth. Because the tiny T 1 phase can be sheared by dislocation without damage accumulation, it can effectively prevent crack propagation. In the second stage of fatigue crack growth, the strength difference between grain boundary and intragranular will directly affect the fatigue crack growth resistance of the alloy. The smaller the strength difference is, the more uniform the deformation of crack tip in the process of crack growth, and it is not easy to produce stress concentration and damage accumulation at the grain boundary. In this case, the alloy exhibits the better the fatigue crack growth resistance and the slower the crack growth rate.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. The evolution of Al-Li Base products for aerospace and space applications10.1007/s11661-012-1155-z ↗
2. Progress in structural materials for aerospace systems11The Golden Jubilee issue—selected topics in materials science and engineering: past, present and future, edited by S. Suresh10.1016/j.actamat.2003.08.023 ↗
3. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
4. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
5. Correlation of intergranular corrosion behaviour with microstructure in Al-cu-Li alloy10.1016/j.corsci.2018.05.011 ↗
6. New aluminum Lithium alloys for aerospace applications
7. Isotropic wrought aluminum-Lithium plate development technology10.4028/www.scientific.net/MSF.217-222.421 ↗
8. Aluminum-lithium alloys for aircraft building10.1007/s11015-012-9580-1 ↗
9. Atomic structure of T1 precipitates in Al-Li-cu alloys revisited with HAADF-STEM imaging and small-angle X-ray scattering10.1016/j.actamat.2010.09.044 ↗
10. Transmission electron microscopy study of the evolution of precipitates in aged Al–Li–cu alloys: the θ’ and T1 phases10.1016/S1359-6454(03)00253-2 ↗
11. Microstructural evolution during aging of an AlCuLiAgMgZr alloy10.1016/1359-6454(95)00319-3 ↗
12. The effect of plastic deformation on Al2CuLi (T1) precipitation10.1007/BF02656799 ↗
13. Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–cu–Li alloy AA219510.1016/j.actamat.2016.02.017 ↗
14. Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al-Cu-Li alloy10.1016/j.actamat.2014.04.046 ↗
15. The role of plastic deformation on the competitive microstructural evolution and mechanical properties of a novel Al–Li–Cu–X alloy10.1016/S1471-5317(00)00002-X ↗
16. Fatigue crack propagation of aeronautic AA7050-T7451 and AA2050-T84 aluminum alloys in air and saline environments
17. Analysis of empirical relation between microstructure, texture evolution and fatigue properties of an Al-cu-Li alloy during different pre-deformation processes10.1016/j.msea.2018.04.047 ↗
18. Staley · 2007
19. Ageing behavior and stress corrosion cracking resistance of a non-isothermally aged Al-Zn-Mg-Cu alloy
20. Research on microstructure and mechanical properties of 2050 Al-Li alloy during non-isothermal aging10.1016/j.jallcom.2022.163977 ↗
21. Effect of different aging treatment on high temperature properties of die-forged Al-5.87Zn-2.07Mg-2.42Cu alloy10.1016/j.matchar.2020.110239 ↗
22. Nucleation on dislocations10.1016/0001-6160(70)90111-2 ↗
23. Precipitate behavior and mechanical properties of enhanced solution treated Al-Zn-Mg-Cu alloy during non-isothermal ageing10.1016/j.jallcom.2017.11.178 ↗
24. Gibbs–Thomson effects in phase transformations10.1016/j.scriptamat.2004.12.026 ↗
25. Coarsening dynamics of self-accommodating coherent patterns10.1016/S1359-6454(01)00335-4 ↗
26. Fatigue and fracture behavior of an Aluminium-Lithium alloy at ambient and cryogenic temperature
27. Dudgeon · 1990
28. Enhanced fatigue crack propagation resistance in a superhigh strength Al–Zn–mg–cu alloy by modifying RRA treatment10.1016/j.matchar.2016.06.023 ↗
29. Transition of crack propagation from a transgranular to an intergranular path in an overaged Al-Zn-Mg-Cu alloy during cyclic loading10.1007/s12540-013-2009-y ↗