High-resolution neutron diffraction study of microstructural changes in nanocrystalline ball-milled niobium carbide NbC0.93
Source abstract
Abstract
Abstract High resolution neutron diffraction was applied for elucidating of the microstructural evolution of nanocrystalline niobium carbide NbC0.93 powders subjected to high-energy ball milling. The diffraction patterns were collected with the high resolution Fourier diffractometer HRFD by using the reverse time-of-flight (RTOF) mode of data acquisition. The traditional single diffraction line analysis, the Rietveld method and more advanced Whole Powder Pattern Modeling technique were applied for the data analysis. The comparison of these techniques was performed. It is established that short-time milling produces a non-uniform powder, in which two distinct fractions with differing microstructure can be identified. Part of the material is in fact milled efficiently, with a reduction in grain size, an increase in the quantity of defects, and a corresponding tendency to decarburize reaching a composition NbC0.80 after 15 h of milling. The rest of the powder is less efficiently processed and preserves its composition and lower defect content. Larger milling times should have homogenized the system by increasing the efficiently milled fraction, but the material is unable to reach a uniform and homogeneous state. It is definitely shown that RTOF neutron diffraction patterns can provide the very accurate data for microstructure analysis of nanocrystalline powders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: X-ray Diffraction in Crystallography · Advanced materials and composites · High-pressure geophysics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Warren · 1969
2. 2004
3. Bestimmung der Grösse und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen
4. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
5. 1993
6. Whole powder pattern modelling10.1107/S0108767301021298 ↗
7. Diffraction line profiles from polydisperse crystalline systems10.1107/S0108767301008881 ↗
8. Neutron diffraction study of nanocrystalline NbC0.93 powders and the anisotropy of deformation distortions10.1134/S0021364014220081 ↗
9. Milling of nonstoichiometric niobium carbide powder to a nanocrystalline state10.1134/S0020168514120127 ↗
10. Production of nanocrystalline powders by high-energy ball milling: model and experiment
11. High-energy milling of nonstoichiometric carbides: effect of nonstoichiometry on particle size of nanopowders10.1016/j.jallcom.2013.08.008 ↗
12. High resolution Fourier diffraction at the IBR-2 reactor10.1080/10446830500454346 ↗
13. High-resolution powder diffractometer HRPT for thermal neutrons at SINQ10.1016/S0921-4526(99)01399-X ↗
14. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
15. MRIA — a program for a full profile analysis of powder multiphase neutron-diffraction time-of-flight (direct and Fourier) spectra10.1107/S0021889891013122 ↗
16. Neutron diffraction study of phase separation in La2CuO4+δ single crystals10.1016/S0921-4534(96)00582-5 ↗
17. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
18. The effect of dislocation contrast on X-ray line broadening: a new approach to line profile analysis10.1063/1.117951 ↗
19. Dislocation effects in powder diffraction10.1107/S002188980702078X ↗
20. PM2K: a flexible program implementing whole powder pattern modelling10.1524/zksu.2006.suppl_23.249 ↗
21. Monocrystal elastic constants of NbC10.1063/1.337249 ↗
22. Effect of nonstoichiometry and ordering on the basal structural parameters of the monocarbides of niobium and tantalum
23. Gusev · 2001
24. Effect of nonstoichiometry of NbCy and TaCy powders on their high-energy ball milling10.1016/j.ijrmhm.2014.05.018 ↗
25. Effect of the nonstoichiometry of tantalum carbide TaCy on the particle size of nanopowders prepared by milling10.1134/S1063783415010175 ↗