Effects of hatch spacing on densification, microstructural and mechanical properties of β-solidifying γ-TiAl alloy fabricated by laser powder bed fusion
Source abstract
Abstract
β-solidifying γ‑titanium aluminide (γ-TiAl) alloys, which typically contain β-phase stabilizers such as Nb and Cr, hold great promise for the aerospace industry and can potentially be processed through additive manufacturing to realize performance unachievable using conventional methods. However, the effects of laser powder bed fusion (L-PBF) parameters on the characteristics of the thus obtained samples remain underexplored. To address this gap, we herein examined the effects of hatch spacing on the densification, microstructural, and mechanical properties of L-PBF-fabricated Ti-44Al-6Nb-1.2Cr (at.%) alloy samples, revealing that the strong influence on thermal history induced the variation in densification and formation of two microstructure types. 0.01 mm hatch spacing resulted in repetitive slow cooling and sufficiently remelting, thus suppressing crack formation, promoting high densification, and inducing a complex phase transformation involving the formation of a basket-weave-structured α2 phase and the 〈001〉 alignment of the β phase along the build direction. 0.06 mm hatch spacing resulted in rapid cooling and insufficient heat accumulation, favoring the massive phase transformation, a jagged morphology α2 phase with a randomly distributed crystallographic texture. Hardness was mainly correlated with phase constitution and volume fraction, whereas compressive properties were jointly determined by additional effects of multiple factors such as grain size and crystallographic texture. This work provides the fundamental insights required to suppress defect formation in β-solidifying γ-TiAl alloys and tailor their microstructure for mechanical property enhancement.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Recent progress in the development of gamma titanium aluminide alloys10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J ↗
2. Advances in gammalloy materials–processes–application technology: successes, dilemmas, and future10.1007/s11837-018-2747-x ↗
3. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
4. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
5. As-cast microstructure characteristics dependent on solidification mode in TiAl-Nb alloys10.1016/j.jallcom.2019.151862 ↗
6. Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability10.1002/adem.200800164 ↗
7. Technology and mechanical properties of advanced γ-TiAl based alloys10.3139/146.110154 ↗
8. Microstructure and mechanical properties of a forged β-solidifying γ TiAl alloy in different heat treatment conditions10.1016/j.intermet.2014.11.008 ↗
9. Peculiar microstructural evolution and tensile properties of β-containing γ-TiAl alloys fabricated by electron beam melting
10. Crystallographic orientation control of pure chromium via laser powder bed fusion and improved high temperature oxidation resistance
11. Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy10.1016/j.actamat.2021.116876 ↗
12. Understanding grain evolution in additive manufacturing through modeling
13. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
14. Microstructure and mechanical properties of a high Nb-TiAl alloy fabricated by electron beam melting10.1016/j.matdes.2018.09.044 ↗
15. Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting
16. Comparison of microstructure, crystallographic texture, and mechanical properties in Ti–15Mo–5Zr–3Al alloys fabricated via electron and laser beam powder bed fusion technologies
17. Characterization of Ti-48Al-2Cr-2Nb built by selective laser melting10.1016/j.scriptamat.2021.114107 ↗
18. Effect of scan length on densification and crystallographic texture formation of pure chromium fabricated by laser powder bed fusion
19. Understanding crack formation mechanisms of Ti–48Al–2Cr–2Nb single tracks during laser powder bed fusion
20. Cracking behavior and control of β-solidifying Ti-40Al-9V-0.5Y alloy produced by selective laser melting10.1016/j.jmst.2019.08.026 ↗
21. Processing parameter effects on residual stress and mechanical properties of selective laser melted Ti6Al4V10.1007/s11665-018-3477-5 ↗
22. Prediction study on in-situ reduction of thermal stress using combined laser beams in laser powder bed fusion
23. Determination of the effect of scan strategy on residual stress in laser powder bed fusion additive manufacturing
24. Porosity formation mechanisms, microstructure evolution and mechanical performance of AlMgScZr alloy fabricated by laser powder bed fusion: effect of hatch distance10.1016/j.jmapro.2023.03.047 ↗
25. Effect of laser hatch spacing on the pore defects, phase transformation and properties of selective laser melting fabricated NiTi shape memory alloys10.1016/j.msea.2022.142965 ↗
26. Martensite colony engineering: a novel solution to realize the high ductility in full martensitic 3D-printed Ti alloys10.1016/j.matdes.2022.110445 ↗
27. From crack-prone to crack-free: eliminating cracks in additively manufactured Ti-48Al-2Cr-2Nb alloy by adjusting phase composition10.1016/j.matdes.2023.112025 ↗
28. Microstructure and crystallographic texture evolution of β-solidifying γ-TiAl alloy during single- and multi-track exposure via laser powder bed fusion10.1007/s12540-023-01579-4 ↗
29. History and development of γ-TiAl alloys and the effect of alloying elements on their phase transformations10.1016/j.jallcom.2022.164811 ↗
30. Stress and deformation evaluations of scanning strategy effect in selective laser melting
31. Single crystalline-like crystallographic texture formation of pure tungsten through laser powder bed fusion10.1016/j.scriptamat.2021.114252 ↗
32. Defect formation mechanisms in selective laser melting: a review10.1007/s10033-017-0121-5 ↗
33. Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting10.1016/j.matdes.2015.07.147 ↗
34. Laser powder bed fusion of AA7075 alloy: influence of process parameters on porosity and hot cracking
35. Crack initiation mechanism of laser powder bed fusion additive manufactured Al-Zn-Mg-Cu alloy10.1016/j.matchar.2022.112415 ↗
36. Cracking mechanism and a novel strategy to eliminate cracks in TiAl alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2021.114151 ↗
37. The crack and pore formation mechanism of Ti–47Al–2Cr–2Nb alloy fabricated by selective laser melting10.1016/j.ijrmhm.2020.105247 ↗
38. Thermal expansion of a multiphase intermetallic Ti-Al-Nb-Mo alloy studied by high-energy X-ray diffraction10.3390/ma14040727 ↗
39. Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy10.1016/j.matdes.2019.108105 ↗
40. Evolution of residual stress behavior in selective laser melting (SLM) of 316L stainless steel through preheating and in-situ re-scanning techniques10.1016/j.optlastec.2021.107806 ↗
41. Achieving ultrahigh-strength in beta-type titanium alloy by controlling the melt pool mode in selective laser melting10.1016/j.msea.2021.141731 ↗
42. Investigation of layer-by-layer laser remelting to improve surface quality, microstructure, and mechanical properties of laser powder bed fused AlSi10Mg alloy10.1016/j.matdes.2021.110092 ↗
43. Physical metallurgy for wrought gamma titanium aluminides: microstructure control through phase transformations10.1016/j.intermet.2004.12.014 ↗
44. Coarsening of martensite with multiple generations of twins in laser additively manufactured Ti6Al4V10.1016/j.actamat.2021.116954 ↗
45. Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young’s modulus10.1016/j.scriptamat.2016.12.038 ↗
46. Programming crystallographic orientation in additive-manufactured beta-type titanium alloy
47. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
48. Massive transformations revisited10.1007/s11661-002-0351-7 ↗
49. Effect of cooling rate on powder characteristics and microstructural evolution of gas atomized β-solidifying γ-TiAl alloy powder10.2320/matertrans.MT-M2023174 ↗
50. Microstructure evolution of gas-atomized β-solidifying γ-TiAl alloy powder during subsequent heat treatment10.3390/cryst13121629 ↗
51. Martensite in a TiAl alloy quenched from beta phase field10.1016/j.intermet.2014.09.007 ↗
52. Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy10.1016/j.intermet.2011.11.015 ↗
53. Hall-petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
54. Plastic deformation of single crystals of a DO19 compound with an off-stoichiometric composition (Ti-36·5 at.% Al) at room temperature10.1080/01418619308225357 ↗
55. Effect of microstructure on the fracture toughness of multi-phase high Nb-containing TiAl alloys10.1016/j.intermet.2018.06.014 ↗
56. Texture evolution, phase transformation mechanism and nanohardness of selective laser melted Ti-45Al-2Cr-5Nb alloy during multi-step heat treatment process10.1016/j.intermet.2017.01.016 ↗
57. The effect of orientation and lamellar structure on the plastic behavior of TiAl crystals10.1016/0921-5093(92)90050-B ↗
58. Orientation and temperature dependence of yield stress and slip geometry of Ti3Al and Ti3Al-V single crystals10.1016/0956-7151(93)90162-L ↗