journal article·2024-02

Agglomerating behavior of in-situ TiB2 particles and strength-ductility synergetic improvement of in-situ TiB2p/7075Al composites through ultrasound vibration

Yihong Wu, Linwei Li, Huijun Kang, Enyu Guo, Jiehua Li, Guohao Du, Zongning Chen, Tongmin Wang

Publisher page

Abstract

Agglomerates of in-situ particles are the key detrimental defects in particulate reinforced aluminum matrix composites (PRAMCs) by acting as Achilles` heel leading to the premature failure of the materials. Effective methods to disperse/eliminate these agglomerates rely on in-depth understanding of the agglomeration mechanism of the in-situ particles. In this work, the agglomerating behavior of TiB 2 particles in Al-Ti-B system was investigated through the thermit reactions between mixed fluorides and molten aluminum. The results indicate that the morphological patterns of TiB 2 agglomerates are inherited from the preformed Al 3Ti intermedium. The formation of flocculent, shell and flaky TiB 2 agglomerates are the results of the diffusing boron atoms continuously reacting with Al 3Ti. The in-situ Al-TiB 2 was used as a precursor to prepare TiB 2 p/7075 Al composites. In particular, ultrasound vibration treatment was applied to explore if a locally forced oscillation can deagglomerate the TiB 2 agglomerates. Microstructural observations strongly support such speculation. Thanks to the deagglomeration and dispersion of TiB 2 particles, both the strength and ductility of the PRAMC have been improved drastically. The fracture surface of the composites was transformed from particle debonding to the dominance of ductile fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Aluminium-titanium diboride (Al–TiB2) metal matrix composites: challenges and opportunities10.1016/j.proeng.2012.06.013 ↗
2. Super plasticity of Al-Zn-Mg-Cu composite containing uniform TiB2 nanoparticles10.1016/j.matchar.2021.111531 ↗
3. Ultrafine-grained Fe-TiB2 high-modulus nanocomposite steel with high strength and isotropic mechanical properties by laser powder bed fusion
4. Microstructure and mechanical properties of friction stir processed Al-Mg-Si alloys dispersion-strengthened by nanosized TiB2 particles10.1016/j.jallcom.2014.07.092 ↗
5. Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al-Zn-Mg-Cu matrix composite10.1016/j.actamat.2019.11.068 ↗
6. Microstructural evolution and mechanical properties of TiB2/2195 composites fabricated by ultrasonic-assisted in-situ casting10.1016/j.ultsonch.2022.106203 ↗
7. Insight into the recrystallization behavior and precipitation reaction of in-situ nano TiB2/Al-Cu-Mg composite during heat treatment10.1016/j.matchar.2021.111458 ↗
8. Development of TiB2 reinforced aluminum foundry alloy based in situ composites-Part I: an improved halide salt route to fabricate Al-5 wt% TiB2 master composite10.1016/j.msea.2014.02.088 ↗
9. Investigation of the clustering behaviour of titanium diboride particles in aluminium10.1016/j.compositesa.2005.02.003 ↗
10. Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites10.1016/j.compositesb.2011.04.004 ↗
11. Preparation of in-situ 5 vol% TiB2 particulate reinforced Al–4.5Cu alloy matrix composites assisted by improved mechanical stirring process10.1016/j.matdes.2016.01.023 ↗
12. On the reaction between aluminium, K2TiF6 and KBF410.1016/S0925-8388(99)00294-7 ↗
13. Experimental analysis of the intermediary phases AlB2, AlB12 and TiB2 in the Al–B and Al–Ti–B systems10.1016/S0925-8388(98)00892-5 ↗
14. Formation of TiB2 particles during dissolution of TiAl3 in Al-TiB2 metal matrix composite using an in situ technique10.1016/j.compscitech.2005.04.016 ↗
15. In situ preparation of TiB2 reinforced Al based composites10.1016/S0924-0136(97)00225-2 ↗
16. Thermodynamic effect of alloying addition on in-situ reinforced TiB2/Al composites10.1007/s11661-005-0154-8 ↗
17. Microstructures of in situ Al/TiB2 MMCs prepared by acasting route10.1023/A:1004729920354 ↗
18. Effects of ultrasound vibration on the microstructure and tensile properties of the nano ZrB2/2024Al composites synthesized by direct melt reaction10.1016/j.jallcom.2016.01.152 ↗
19. A quantitative study of the synthesis of TiB2 particles via salts metal reaction at different temperatures10.1007/s11661-015-3268-7 ↗
20. Application of synchrotron radiation X-ray computed tomography to investigate the agglomerating behavior of TiB2 particles in aluminum10.1016/j.jallcom.2014.10.190 ↗
21. TiB2 reinforced aluminum based in situ composites fabricated by stir casting10.1016/j.msea.2014.12.033 ↗
22. Effects of ultrasound vibration and manganese on microstructure and mechanical properties of hypereutectic Al-Si alloys with 2%Fe10.1016/j.intermet.2012.09.001 ↗
23. Preparation and rheocasting of semisolid slurry of 5083 Al alloy with indirect ultrasound vibration process10.1016/j.msea.2011.08.014 ↗
24. A novel method for grain refinement and microstructure modification in TiAl alloy by ultrasound vibration10.1016/j.msea.2015.12.001 ↗
25. Manipulating the particle distribution of in situ TiB2p/Al composites via acoustic vibration and cooling rate10.1016/j.matlet.2019.127063 ↗
26. X-ray micro-tomography an attractive characterisation technique in materials science10.1016/S0168-583X(02)01689-0 ↗
27. Direct observation of stray crystal formation in unidirectional solidification of Sn–Bi alloy by X-ray imaging10.1016/j.jcrysgro.2003.09.052 ↗
28. An analytical formula for ring artefact suppression in X-ray tomography10.1016/j.aml.2010.08.022 ↗
29. In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy10.1016/j.actamat.2014.05.035 ↗
30. In situ fabrication of Al3Ti particle reinforced aluminium alloy metal-matrix composites10.1016/j.msea.2003.08.049 ↗
31. Boride phase formation in the production of Al-B master alloys10.1016/j.jallcom.2017.06.107 ↗
32. Effect of ultrasonic vibration on microstructural evolution of the reinforcements and degassing of in situ TiB2p/Al-12Si-4Cu composites10.1016/j.jmatprotec.2011.09.021 ↗
33. Effect of ultrasonic treatment on microstructural and mechanical properties of Al 7075/Grp composite10.1016/j.matchemphys.2022.125905 ↗
34. Ultrasound and matter—physical interactions10.1016/j.pbiomolbio.2006.07.024 ↗
35. Ultrsonic cavitation areal distribution in molten aluminum and sound pressure attenuation coefficient
36. Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites10.1016/j.msea.2022.142958 ↗