Microstructure, texture and mechanical properties of 6061 aluminum laser beam welded joints
Source abstract
Abstract
Abstract In the present study, laser beam welding was carried out with 6061 Al alloy plate to study the microstructural evolution under various welding heat input (ηP/v = 30 J/mm, 38 J/mm, 46 J/mm, and 58 J/mm). The width of the weld metals increased continuously with the heat input values. Quantitatively correlation of the microstructure distribution with welding parameters was developed based on the EBSD results. The weld metals mainly consisted of coarse columnar dendrites and equiaxed dendrites. The ratio of equiaxed dendrites which were controlled by constitutional supercooling and heterogeneous nuclei showed directly proportional relationship with the weld strength. Strong cube texture ({001}⟨100⟩) was observed in columnar dendrites, which showed harmful effect on the weld strength. Slight softening in heat affected zone due to recrystallization was identified by nanoindentation tests. All specimens failed in weld metal and the fracture surfaces showed the characteristics of ductile fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
2. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
3. Phase formation in 6060/4043 aluminum weld solidification10.1016/j.msea.2009.03.087 ↗
4. Laser spot welding of laser textured sheet to aluminium10.1016/j.jmatprotec.2016.10.025 ↗
5. Steel to aluminium key-hole laser welding10.1016/j.msea.2006.10.106 ↗
6. Microstructure and mechanical properties of newly developed aluminum-lithium alloy 2A97 welded by fiber laser10.1016/j.msea.2014.08.038 ↗
7. Process modelling applied to 6082-T6 aluminium weldments-I. Reaction kinetics10.1016/0956-7151(91)90085-F ↗
8. Process modelling applied to 6082-T6 aluminium weldments-II. Applications of model10.1016/0956-7151(91)90086-G ↗
9. Microstructural and mechanical characterization of laser beam welded AA6056 Al-alloy10.1016/j.msea.2011.06.010 ↗
10. Microstructure characteristics of thick aluminum alloy plate joints welded by fiber laser10.1016/j.matdes.2015.06.087 ↗
11. Correlation of high power laser welding parameters with real weld geometry and microstructure10.1016/j.optlastec.2017.03.004 ↗
12. Welding parameters and the grain structure of weld metal-A thermodynamic consideration10.1007/BF02628392 ↗
13. Effect of weld characteristic on mechanical strength of laser-arc hybrid-welded Al-Mg-Si-Mn aluminum alloy10.1007/s11661-016-3697-y ↗
14. Laser brazing of aluminium10.1016/S0924-0136(03)00310-8 ↗
15. As-cast morphology of iron-intermetallics in Al-Si foundry alloys10.1016/j.scriptamat.2005.06.028 ↗
16. Iron-rich intermetallic phases and their role casting defect formation in hypoeutectic Al-Si alloys
17. Kou · 2003
18. Columnar to equiaxed transition in solidification processing10.1016/S1468-6996(01)00047-X ↗
19. Columnar-equiaxed transition in Al–Cu alloy ingots10.1016/0001-6160(82)90193-6 ↗
20. Microstructural and microtextural analysis of InterPulse GTCAW welds in Cp-Ti and Ti-6Al-4V10.1016/j.msea.2010.08.036 ↗
21. Grain structures in aluminum alloy GTA welds10.1007/BF02653489 ↗
22. Glicksman · 2011
23. Prediction of solidification cracking in pulsed laser welding of 2024 aluminum alloy10.1016/j.actamat.2014.09.002 ↗
24. Crystal growth during keyhole mode laser welding10.1016/j.actamat.2017.04.074 ↗
25. Microstructure and properties of the laser butt welded 1.5-mm thick T2 copper joint achieved at high welding speed10.1016/j.matdes.2015.09.072 ↗
26. Non-equilibrium solute partitioning in a laser re-melted Al-Li-Cu alloy10.1016/j.actamat.2013.08.050 ↗
27. Integrated modelling of a 6061-T6 weld joint: from microstructure to mechanical properties10.1016/j.actamat.2016.06.017 ↗
28. Effect of process parameters on the strength of resistance spot welds in 6082-T6 aluminium alloy10.1016/j.matdes.2009.11.052 ↗
29. Microstructure and mechanical properties of laser beam welded Al-Li alloy 2060 with Al-Mg filler wire10.1016/j.matdes.2015.08.144 ↗
30. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds10.1016/S1359-6454(03)00319-7 ↗
31. Effects of heat input on tensile properties and fracture behavior of friction stir welded Mg-3Al-1Zn alloy10.1016/j.msea.2009.09.044 ↗
32. Texture characterization of autogenous Nd: YAG laser welds in AA5182-O and AA6111-T4 aluminum alloys10.1007/s11661-004-0047-2 ↗
33. Effect of pulsed current and post weld aging treatment on tensile properties of argon arc welded high strength aluminium alloy10.1016/j.msea.2006.12.125 ↗