journal article·2019-01

Misorientation angle distribution of deformation-induced boundaries provided by their EBSD-based separation from original grain boundaries: Case study of copper deformed by compression

N.Yu. Zolotorevsky, V.V. Rybin, A.N. Matvienko, E.A. Ushanova, S.A. Philippov

Publisher page

Abstract

Abstract Grain lattice fragmentation in heavily deformed metals is controlled by the formation of deformation-induced boundaries (DIBs) with misorientations evolving from low to high angles with increasing strain. A method is suggested allowing the separation of the contributions from DIBs and original grain boundaries to the overall misorientation angle distribution based on electron backscatter diffraction (EBSD) data. The peculiarities, accuracy and limitations of the method are considered by the example of copper under uniaxial compression at room temperature and 150 °C. It is shown that obtained distributions of DIB misorientation can be analyzed using their representation as a superposition of partial distributions. The partial distributions f1 and f2, which describe the low-angle interval, correlate with the distributions determined earlier by the transmission electron microscopy for two types of dislocation boundaries, while the third partial distribution f3 relates to the high-angle DIBs, whose misorientations go beyond the range of the first two distributions. The rise of deformation temperature does not affect the character of misorientation distribution development.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Plastic fracture of molybdenum as a consequence of structure fragmentation
2. Rybin · 1986
3. Geometrically necessary, incidental and subgrain boundaries10.1016/0956-716X(91)90451-6 ↗
4. Scalling of microsructural parameters: misorientations of deformation induced boundaries10.1016/S1359-6454(96)00153-X ↗
5. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
6. Microstructure and strength of nickel at large strains10.1016/S1359-6454(00)00082-3 ↗
7. Quantification of the microstructures of high purity nickel subjected to dynamic plastic deformation10.1016/j.actamat.2011.11.035 ↗
8. Large strain work hardening and textures10.1016/0079-6425(80)90001-8 ↗
9. The application of EBSD to the study of substructural development in a cold rolled single-phase aluminium alloy10.1016/S1359-6454(02)00513-X ↗
10. Deformed metals — structure, recrystallization and strength10.1179/1743284711Y.0000000046 ↗
11. Crystallographic features of the internal structure of deformed lamellar pearlite colonies
12. Fragmentation of crystals upon deformation twinning and dynamic recrystallization10.1134/S0031918X1507011X ↗
13. Main patterns of lattice fragmentation in copper processed by dynamic equal-channel angular pressing
14. Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium10.1016/S1359-6454(98)00229-8 ↗
15. Orientation dependence of the deformation microstructure in compressed aluminum10.1016/j.scriptamat.2011.11.034 ↗
16. Effect of grain boundaries and grain orientation on structure and properties10.1007/s11661-010-0292-5 ↗
17. Orientation dependence of the dislocation microstructure in compressed body-centered cubic molybdenum10.1016/j.matchar.2014.02.001 ↗
18. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
19. The evolution of disorientations for several types of boundaries10.1016/S0921-5093(01)00947-9 ↗
20. High angle boundaries formed by grain subdivision mechanisms10.1016/S1359-6454(97)00027-X ↗
21. New discoveries in deformed metals10.1007/s11661-001-0167-x ↗
22. Stage IV work-hardening related to disorientations in dislocation structures10.1016/j.msea.2003.11.088 ↗
23. Microstructural characterization of nickel subjected to dynamic plastic deformation10.1016/j.scriptamat.2011.11.022 ↗
24. Characterization of deformed microstructures
25. EBSD contra TEM characterization of a deformed aluminium single crystal
26. Comparative microstructural characterization of a friction-stir-welded aluminum alloy using TEM and SEM-based techniques10.1007/s11661-006-0020-3 ↗
27. Quantitative analysis of grain subdivision in cold rolled aluminium10.1016/S1359-6454(01)00150-1 ↗
28. Orientation inhomogeneities within individual grains in cold-rolled aluminium resolved by electron backscatter diffraction
29. Characterizing the deformed state in Al-0.1Mg alloy using high resolution electron backscattered diffraction10.1046/j.1365-2818.2002.00997.x ↗
30. Microstructure and mechanical properties of nickel processed by accumulative roll bonding10.1016/j.msea.2013.04.002 ↗
31. Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273 K10.1016/j.actamat.2014.09.023 ↗
32. Deformation structure versus grain structure after severe plastic deformation
33. Resolving orientation correlation in deformation structures by EBSD10.1557/PROC-819-N1.5 ↗
34. Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb-V microalloyed steel10.1016/j.msea.2010.11.078 ↗
35. Grain detection from 2d and 3d EBSD data — specification of the MTEX algorithm10.1016/j.ultramic.2011.08.002 ↗
36. Micro- and macrotexture evolution during steel-wire drawing
37. A model of grain fragmentation based on lattice curvature10.1016/j.actamat.2009.11.020 ↗
38. EBSD and TEM investigation of the hot deformation substructure characteristics of a type 316L austenitic stainless steel10.1111/j.0022-2720.2004.01305.x ↗
39. Formation of highly misoriented fragments at hot band grain boundaries during cold rolling of interstitial-free steel10.1007/s11661-015-2878-4 ↗
40. Changes in misorientations of grain boundaries in titanium during deformation10.1016/j.matchar.2010.04.005 ↗
41. Experimental characterization and modeling of misorientations induced by plastic deformation at boundaries of annealing twins in austenitic steel10.1007/s10853-016-0510-7 ↗
42. Analysis of grain misorientation distribution in polygonal ferrite of low-carbon steel10.1016/j.matchar.2016.10.022 ↗
43. Second paper on statistics associated with the random disorientation of cubes10.1093/biomet/45.1-2.229 ↗
44. Modelling of grain boundary misorientation spectrum in polycrystals with crystallographic texture10.1016/0956-7151(92)90445-K ↗
45. Dislocation boundaries — the distribution function of disorientation angles10.1016/S1359-6454(01)00027-1 ↗
46. Disorientations in dislocation structures10.1016/j.msea.2005.03.064 ↗
47. Grain interaction effects in polycrystalline Cu10.1016/j.msea.2005.02.043 ↗