journal article·2024-04

Microstructure refinement and mechanical properties enhancement of Mg Al alloys via a novel of MgO nanoparticles modified graphene nanoplates refiner by in-situ synthesis

Shuaihu Wei, Xiaojun Wang, Xuejian Li, Hailong Shi, Xiaoshi Hu, Chao Xu, Dongrong Liu

Publisher page

Abstract

Grain refinement by inoculation treatment is one of the simplest and most efficient ways to improve the mechanical properties of Mg Al alloys. In this study, a novel GNP@MgO grain refiner was designed by an in-situ reaction of CO 2 gas and Mg melt. It can significantly reduce the average grain sizes of Mg 9Al alloys from 126.9 μm to 12.7 μm. The mechanical properties of Mg 9Al alloys were significantly enhanced, and its ultimate compressive strength was increased from 370 MPa to 436 MPa. HRTEM characterization and atomic interface analyses have shown that the Al 4C 3 phase has an orientation relationship with α-Mg as (009) Al4C3//(002) Mg, and [11−20] Al4C3//[11–20] Mg, which has a low degree of lattice mismatch of 5.79%. Besides, these MgO nanoparticles can adsorb on the surface of α-Mg grains and play a role in hindering growth and solute diffusion. The ultra-high grain refinement efficiency of 90% is achieved through the synergistic effects of GNP promoting heterogeneous nucleation and MgO nanoparticles inhibiting grain growth. This work sheds new light on designing innovative and effective grain refiners for Mg alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Microstructure modification and corrosion resistance enhancement of die-cast Mg-Al-Re alloy by Sr alloying10.1016/j.jma.2020.09.008 ↗
2. Solute redistribution and mechanism of structure refinement of Mg-Al alloy during solidification under high pressure
3. Nonisothermal dissolution kinetics on Mg17Al12 intermetallic in Mg-Al alloys10.1016/j.jma.2021.02.007 ↗
4. Feasibility study on utilizing carbon dioxide during the processing of Mg-Al alloys10.1016/j.jmatprotec.2011.03.016 ↗
5. Effect of carrier gases on the entrainment defects within AZ91 alloy castings10.1016/j.jma.2021.07.005 ↗
6. Grain refinement of Mg-Al alloys inoculated by MgAl2O4 powder10.1016/j.jma.2020.04.010 ↗
7. Grain refinement and improvement of mechanical properties of AZ31 magnesium alloy inoculated by in-situ oxidation process10.1016/j.jmrt.2021.03.035 ↗
8. The influence of CaO addition on grain refinement of cast magnesium alloys10.1016/j.scriptamat.2015.12.015 ↗
9. Realizing the purification and grain refinement of Mg-Gd-Y alloy by one-step flux refining10.1016/j.jmst.2023.05.080 ↗
10. Grain refinement in laser remelted Mg-3Gd-1Gd-0.5Zr alloy10.1016/j.scriptamat.2020.03.006 ↗
11. Grain refinement mechanism in Mg-Al alloys with Al4C3 microparticles10.1016/j.msea.2009.12.030 ↗
12. Mechanism of grain refinement of Mg-Al alloys by SiC inoculation10.1016/j.scriptamat.2011.01.005 ↗
13. The effect of charcoal addition on the grain refinement and ageing response of magnesium alloy AZ9110.1016/j.msea.2011.08.004 ↗
14. Grain refining mechanism of a carbon addition method in a mg-Al magnesium alloy10.1016/j.scriptamat.2003.07.001 ↗
15. Discussion on grain refining mechanism of AM30 alloy inoculated by MgCO310.1016/j.jma.2017.04.001 ↗
16. Grain refinement of AZ91D magnesium alloy by a new Mg-50%Al4C3 master alloy10.1016/j.jallcom.2009.12.064 ↗
17. Grain refinement of Mg-Al cast alloy by the addition of manganese carbonate10.1016/j.jallcom.2009.10.141 ↗
18. Al2MgC2 and AlFe3C formation in AZ91 Mg alloy melted in Fe-C crucibles10.1016/j.jallcom.2020.156415 ↗
19. First-principles calculations on Mg/Al2CO interfaces10.1016/j.apsusc.2013.09.006 ↗
20. Nanoparticle-inhibited growth of primary aluminum in Al-10Si alloys10.1016/j.actamat.2015.10.005 ↗
21. Bulk ultrafine grained/nanocrystalline metals via slow cooling10.1126/sciadv.aaw2398 ↗
22. Achieving high strength and modulus in graphene reinforced mg matrix composites via an in-situ process10.1016/j.msea.2022.143713 ↗
23. Direct synthesis and modification of graphene in Mg melt by converting CO2: a novel route to achieve high strength and stiffness in graphene/Mg composites10.1016/j.carbon.2021.10.017 ↗
24. The morphological transformation of carbon materials from nanospheres to graphene nanoflakes by thermal plasma10.1016/j.carbon.2019.08.077 ↗
25. Facile synthesis of free-standing, flexible hard carbon anode for high-performance sodium ion batteries using graphene as a multi-functional binder10.1016/j.carbon.2018.05.056 ↗
26. A green and efficient method for preparing graphene using CO2@Mg in-situ reaction and its application in high-performance lithium-ion batteries10.1016/j.jallcom.2022.163700 ↗
27. Direct conversion of CO2 to graphene via vapor-liquid reaction for magnesium matrix composites with structural and functional properties10.1016/j.jma.2021.06.012 ↗
28. The Mg-C phase equilibria and their thermodynamic basis10.3139/146.110787 ↗
29. CVD diamond films: from growth to applications10.1016/S1567-1739(01)00061-X ↗
30. Decipher the ultra-high strengthening and toughening efficiency of GNS-MgO/Mg layered composite with in-situ enhanced interface10.1016/j.carbon.2022.04.063 ↗
31. Nanoparticle-induced growth behavior of primary α-Mg in AZ91 alloys
32. Grain refinement mechanism of SiC nanoparticles/Mg-9 wt.% Al composite investigated by sharp interface model at microscale and nanoscale10.1016/j.jallcom.2022.166269 ↗
33. Investigation of grain refinement and mechanical properties of nano-TiCN particles reinforced Mg-9Al alloy via experiments and sharp-interface model10.1016/j.matchar.2023.113613 ↗
34. Microstructural modification and its effect on strengthening mechanism and yield asymmetry of in-situ TiC-TiB2/AZ91 magnesium matrix composite10.1016/j.msea.2018.03.060 ↗
35. Enhancing mechanical properties of squeeze-cast AZ91 magnesium alloy by combined addition of Sb and SiC nanoparticles10.1016/j.msea.2020.140341 ↗
36. Comparative study of the effects of CaO and Ce-La misch metal on the microstructure and properties of AZ91 alloy10.1016/j.jmrt.2020.03.036 ↗
37. Microstructure evolution of as-cast AlN/AZ91 composites and room temperature compressive properties10.1016/j.jallcom.2018.10.041 ↗
38. Microstructure and mechanical properties of a novel TiNi particulate reinforced AZ91 metal matrix composite10.1016/j.matlet.2018.08.121 ↗
39. Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behavior10.1016/j.matdes.2013.07.056 ↗
40. The control of NbB2 particles in Al-NbB2 master alloy and its effect on grain refinement of AZ91 magnesium alloy10.1016/j.msea.2022.143808 ↗
41. The influence of nanoparticles on dendritic grain growth in Mg alloys10.1016/j.actamat.2018.04.023 ↗
42. Influence of Ca adsorption on the heterogeneous nucleation of α-Mg on Al4C3 particles: first-principles calculation and experiment10.1016/j.apsusc.2019.06.140 ↗
43. Effects of mass and interaction mismatches on in-plane and cross-plane thermal transport of Si-doped graphene10.1016/j.ijheatmasstransfer.2021.120979 ↗
44. Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography10.1016/j.actamat.2016.10.022 ↗
45. The interdependence theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
46. A comparative study of the role of solute, potent particles and ultrasonic treatment during solidification of pure Mg, Mg-Zn, and Mg-Zr alloys10.1016/j.jma.2020.08.006 ↗