journal article·2023-12

Effect of Mo addition on AC soft magnetic property, hardness and microstructure of FeCoNiMo (0 ≤ x ≤ 0.25) medium entropy alloys

Hui Xu, Yubing Xia, Mengya Chen, Le Ma, Haonan Li, Bin Li, Zhongyuan Wu, Xiaohua Tan

Publisher page

Abstract

The FeCoNi medium entropy alloy (MEA) has good alternating current (AC) magnetic properties but poor mechanical properties. This limits its application in soft magnetic materials. In this work, the effects of adding a small amount of Mo on the soft magnetic properties, hardness, and microstructure of FeCoNiMo x (0 ≤ x ≤ 0.25) MEAs were investigated. The results indicate that a suitable addition of Mo can simultaneously improve the AC soft magnetic properties and hardness of the alloys. When x = 0.15, the total loss ( P s), AC coercivity (AC H c), and maximum AC applied magnetic field (AC H m) of the alloy were improved by 41%, 37%, and 38% over those of the x = 0 alloy, respectively. When x = 0.25, the nano-hardness of the alloy is 91% higher than that of the x = 0 alloy. The results of the microstructure analysis show that the appropriate addition of Mo homogenized the microstructure and refined the grains of the alloys. Meanwhile, the addition of Mo also led to the appearance of two FCC phases with alternating distribution and inhibited the formation of dislocation in the alloys. The mechanisms of adding elemental Mo to improve the soft magnetic properties and hardness of the alloys are discussed. Our work provides an effective way to enhance the soft magnetic and mechanical properties of MEA simultaneously.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. A review on improving mechanical properties of high entropy alloy: interstitial atom doping10.1016/j.jmrt.2023.05.002 ↗
4. A review on the dynamic-mechanical behaviors of high-entropy alloys10.1016/j.pmatsci.2023.101090 ↗
5. Physical properties of high entropy alloys10.3390/e15125338 ↗
6. Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures10.1016/j.jallcom.2013.11.084 ↗
7. First hexagonal close packed high-entropy alloy with outstanding stability under extreme conditions and electrocatalytic activity for methanol oxidation10.1016/j.scriptamat.2017.05.022 ↗
8. Microstructural characterization of mechanically alloyed FeCoNiMnV high entropy alloy consolidated by spark plasma sintering
9. Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy10.1016/j.jmmm.2014.07.023 ↗
10. Effects of heterogeneous ultrafine grain and strain rate on mechanical properties of CoCrNi medium entropy alloy10.1016/j.jallcom.2022.167791 ↗
11. Microstructure and mechanical properties of the (TiZrV)100-xAlx medium-entropy alloys10.1016/j.jmrt.2023.01.192 ↗
12. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
13. Effects of short-range order on the magnetic and mechanical properties of FeCoNi(AlSi)x high entropy alloys10.3390/met7110482 ↗
14. A novel Fe-Co-Ni-Si high entropy alloy with high yield strength, saturated magnetization and curie temperature10.1016/j.matlet.2020.128653 ↗
15. A systematic investigations on effect of annealing temperature on magnetic properties of a promising soft magnetic Co35Cr5Fe10Ni30Ti20 HEA10.1016/j.jallcom.2022.167451 ↗
16. Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying10.1016/j.jallcom.2018.09.204 ↗
17. Alloying, phases and magnetic behaviour of mechanically alloyed FeNiMnCu-based high entropy alloys10.1080/02670836.2023.2180902 ↗
18. A combinatorial approach for assessing the magnetic properties of high entropy alloys: role of Cr in AlCoxCr1-xFeNi10.1002/adem.201700048 ↗
19. High-entropy alloys with high saturation magnetization, electrical resistivity, and malleability10.1038/srep01455 ↗
20. The effects of phase constitution on magnetic and mechanical properties of FeCoNi(CuAl)x (x = 0-1.2) high-entropy alloys10.1016/j.jallcom.2016.09.271 ↗
21. Composition dependence of structure, physical and mechanical properties of FeCoNi(MnAl)x high entropy alloys10.1016/j.intermet.2017.04.007 ↗
22. Tuning AC magnetic properties of FeCoNi1+xCu1-xAl (0 ≤ x ≤ 1.0) high-entropy alloys by adjusting Ni and Cu content10.1016/j.jallcom.2022.166174 ↗
23. Microstructure and magnetic behaviors of FeCoNi(Al) alloys with incoherent nanoprecipitates prepared by high-pressure solidification10.1016/j.jallcom.2021.162501 ↗
24. Mechanically alloyed (FeCoNi)75Cu25-xSix high entropy alloys: phase evaluation and magnetic properties10.1016/j.jallcom.2023.170030 ↗
25. Invar effects in FeNiCo medium entropy alloys: from an invar treasure map to alloy design10.1016/j.intermet.2019.106520 ↗
26. Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy10.1016/j.scriptamat.2020.05.063 ↗
27. Tailoring AC magnetic properties of FeCoNi(MnSi)x (0 ≤ x ≤ 0.4) high-entropy alloys by the addition of Mn and Si elements10.1016/j.jallcom.2019.03.411 ↗
28. Accelerated emergence of CoNi-based medium-entropy alloys with emphasis on their mechanical properties10.1016/j.cossms.2022.101032 ↗
29. Control of discontinuous and continuous precipitation of γ’-strengthened high-entropy alloys through nanoscale Nb segregation and partitioning10.1016/j.jallcom.2020.154903 ↗
30. Unveiling the mechanism of abnormal magnetic behavior of FeNiCoMnCu high-entropy alloys through a joint experimental-theoretical study10.1103/PhysRevMaterials.4.014402 ↗
31. Accelerated and conventional development of magnetic high entropy alloys10.1016/j.mattod.2021.03.018 ↗
32. Effect of Mo and Ni elements on microstructure evolution and mechanical properties of the CoFeNixVMoy high entropy alloys10.1016/j.jallcom.2015.07.185 ↗
33. Effect of μ-precipitates on the microstructure and mechanical properties of non-equiatomic CoCrFeNiMo medium-entropy alloys10.1016/j.jallcom.2018.12.040 ↗
34. Effect of Mo addition on the microstructural evolution and mechanical properties of Fe-Ni-Cr-Mn-Al-Ti high entropy alloys10.1016/j.msea.2023.144579 ↗
35. Magnetic properties of high permeability NiFeMo/Cu composite wires10.1016/j.jallcom.2006.01.126 ↗
36. AC magnetic properties of the bulk Fe-Ni and Fe-Ni-Mo soft magnetic alloys prepared by warm compaction10.1016/j.jallcom.2008.08.137 ↗
37. Signature effects of spin clustering and distribution of spin couplings on magnetization behaviour in Ni-Fe-Mo and Ni-Fe-W alloys10.1088/0953-8984/23/30/306004 ↗
38. Correlation between microstructure and soft magnetic parameters of Fe-Co-Ni-Al medium-entropy alloys with FCC phase and BCC phase10.1016/j.intermet.2020.106898 ↗
39. Novel CoFeAlMn high-entropy alloys with excellent soft magnetic properties and high thermal stability10.1016/j.jmst.2023.01.010 ↗
40. Effect of grain and phase boundaries on soft magnetic properties of FeCoNiAlSi high-entropy alloys10.1016/j.matlet.2021.129965 ↗
41. High frequency magnetic behavior of FeCoNiMnxAl1−x high-entropy alloys regulated by ferromagnetic transformation10.1016/j.jallcom.2021.163428 ↗
42. Correlation between the magnetic properties and phase constitution of FeCoNi(CuAl)0.8Gax (0 ≤ x ≤ 0.08) high-entropy alloys10.1016/j.jallcom.2018.02.189 ↗
43. The AC soft magnetic properties of FeCoNixCuAl (1.0 ≤ x ≤ 1.75) high-entropy alloys10.3390/ma12244222 ↗
44. Phase separation in equiatomic AlCoCrFeNi high-entropy alloy10.1016/j.ultramic.2012.12.015 ↗
45. The microstructure and properties of (FeCrNiCo)AlxCuy high-entropy alloys and their TiC-reinforced composites10.1016/j.msea.2014.01.044 ↗
46. Liquid phase separation phenomena in Al2.2CrCuFeNi2 HEA10.1016/j.intermet.2018.04.004 ↗
47. A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties10.1016/j.matlet.2016.01.096 ↗
48. Study of the microstructure of high-entropy alloys AlFeCuCoNiCrTix (x = 0, 05, 1.0)10.4028/www.scientific.net/AMM.66-68.894 ↗
49. Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy10.1038/ncomms6964 ↗
50. Spinodal decomposition and the pseudo-binary decomposition in high-entropy alloys10.1016/j.actamat.2023.118775 ↗
51. Boyun · 2011
52. Understanding the dense stripe domains in soft magnetic film10.1016/j.apsusc.2015.04.010 ↗
53. Hubert · 1998
54. Some properties of factors of specific total loss components in electrical steel10.1109/TMAG.2009.2033559 ↗
55. Hysteresis losses in nanocrystalline alloys with magnetic-field-induced anisotropy10.1016/j.jmmm.2019.02.018 ↗
56. Effect of Ho addition on AC soft magnetic property, microstructure and magnetic domain of FeCoNi(CuAl)0.8Hox (x = 0-0.07) high-entropy alloys10.1016/j.intermet.2021.107216 ↗
57. Improving the glass formation ability and magnetic properties by Nb in Fe-Si-B-P-Cu-Nb nanocrystalline alloys10.1016/j.mseb.2020.114942 ↗
58. Cell-boundary-structure controlled magnetic-domain-wall-pinning in 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets10.1016/j.matchar.2020.110575 ↗
59. A novel formation and structure evolution of Cu-rich precipitates in FeCoNiCuAl high-entropy alloy10.1016/j.matchar.2022.112161 ↗
60. Coercivity of single pinning center measured by hall micromagnetometry10.1142/S0219581X04001857 ↗
61. Magnetic nanoparticles as efficient bulk pinning centers in type-II superconductors10.1103/PhysRevB.71.024527 ↗
62. Ultrahigh hardness and high electrical resistivity in nano-twinned, nanocrystalline high-entropy alloy films10.1016/j.apsusc.2018.01.050 ↗
63. Magnetic properties, electrical resistivity, and hardness of high-entropy alloys FeCoNiPd and FeCoNiPt10.1016/j.jmmm.2022.170024 ↗
64. Microstructural and electrical properties of AlN-CoCrFeMnNi cermet obtained by hot pressing10.1016/j.ceramint.2022.09.054 ↗
65. A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: microstructural evolution and mechanical properties10.1016/j.jallcom.2018.11.318 ↗
66. Effects of C and Mo on microstructures and mechanical properties of dual-phase high entropy alloys10.1016/j.intermet.2019.04.014 ↗
67. First nucleation rule for solid-state nucleation in metal-metal thin-film systems10.1063/1.93578 ↗
68. Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy
69. Effects of Mo-doping on the microstructure and mechanical properties of CoCrNi medium entropy alloy10.1557/jmr.2020.256 ↗
70. The effect of Al addition on solid solution strengthening in CoCrFeMnNi: experiment and modelling10.1016/j.actamat.2022.118208 ↗