journal article·2025-03

Loss-free tensile ductility of aluminum composites through in situ reaction and interfacial modification

Xianxian Deng, Yanzhi Peng, Zunyan Xu, Peng Gao, Li Fu, Liyuan Liu, Jingmei Tao, Yichun Liu, Jianhong Yi, Caiju Li

Publisher page

Abstract

The strength-ductility trade-off is usually an unavoidable situation in metal matrix composites. In present study, in-situ nano-Al 2O 3 and Al 2Cu hybrid reinforced Al Si matrixed composite was prepared by powder metallurgy. Through in-situ synthesis and interface modification, the composite achieved a good balance of strength and ductility. The tensile strength of the composites is 511.67 MPa, marking a remarkable 112 % increase compared to the matrix, while maintaining virtually no loss of plasticity. The experimental results demonstrate that the primary enhancing factors for the strength of the composites are the thermal mismatch strengthening and Orowan strengthening mechanisms, which are a result of precipitation of in-situ nano-Al 2Cu phase and nano-Al 2O 3 particles. The enhanced plasticity of the material is attributed to the formation of an Al/Al 2O 3/Si sandwich interface, which exhibits a lower mismatch compared to Al Si interface. This improvement enhances the load transfer capacity between matrix and Si particles, leading to a substantial increase in yield strength while minimizing loss of plasticity. The current study aims to overcome strength-ductility trade-off in metal matrix composites, which can provide new insights for production of high-performance metal matrix composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Highly ductile hypereutectic Al-Si alloys fabricated by selective laser melting10.1016/j.jmst.2021.07.050 ↗
2. Effect of heat treatment before fast multiple rotation rolling on friction surfaced Al–Si–Cu alloy10.1016/j.jmrt.2024.09.119 ↗
3. Impact of P and Sr on solidification sequence and morphology of hypoeutectic Al-Si alloys: combined thermodynamic computation and phase-field simulation10.1016/j.actamat.2015.06.056 ↗
4. A new synergy to overcome the strength-ductility trade-off dilemma in Al-Si-Cu alloy by micro-nano-particle complex clusters10.1016/j.matdes.2023.111973 ↗
5. Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al-Si-Mg-Mn alloys
6. The effect of squeeze casting process on the microstructure, mechanical properties and wear properties of hypereutectic Al-Si-Cu-Mg alloy
7. Effect of Ge and Mg additions on the aging response behavior and mechanical properties of Al-Si-Cu alloy
8. A novel method for improving the microstructure and the properties of Al-Si-Cu alloys prepared using rapid solidification/powder metallurgy
9. Nanoparticle-inhibited growth of primary aluminum in Al-10Si alloys10.1016/j.actamat.2015.10.005 ↗
10. Microstructure and mechanical properties of hypoeutectic Al-Si composite reinforced with TiCN nanoparticles10.1016/j.matdes.2016.01.144 ↗
11. Mechanical and microstructural characterization of hybrid aluminum nanocomposites synthesized from an Al-Fe3O4System by friction stir processing10.1007/s12540-019-00393-1 ↗
12. In situ fabrication of (α-Al2O3 + Al3Zr)/Al composites in an Al-ZrO2 system10.1016/j.compscitech.2010.08.021 ↗
13. Revealing the strengthening and toughening mechanisms of Al-CuO composite fabricated via in-situ solid-state reaction10.1016/j.actamat.2020.116524 ↗
14. Break through the strength-ductility trade-off dilemma in aluminum matrix composites via precipitation-assisted interface tailoring10.1016/j.actamat.2022.118470 ↗
15. Interfacial bonding mechanism and annealing effect on Cu-Al joint produced by solid-liquid compound casting10.1016/j.jmatprotec.2017.10.050 ↗
16. Synthesis of copper-alumina nanocomposite by reactive milling10.1016/j.msea.2004.10.035 ↗
17. Surface effects in the creep of cadmium single crystals10.1038/165611b0 ↗
18. In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy10.1016/j.actamat.2018.01.036 ↗
19. Revealing the exceptional cryogenic strength-ductility synergy of a solid solution 6063 alloy by in-situ EBSD experiments10.1016/j.jmst.2024.03.081 ↗
20. Bioinspired structural materials10.1038/nmat4089 ↗
21. Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations10.1016/j.actamat.2010.06.028 ↗
22. Defect-interface interactions in irradiated Cu/Ag nanocomposites10.1016/j.actamat.2018.09.003 ↗
23. Nanostructural hierarchy increases the strength of aluminium alloys10.1038/ncomms1062 ↗
24. Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al-12.7%Si alloys investigated by SEM/EBSD10.1016/j.actamat.2015.06.041 ↗
25. Solute adsorption and entrapment during eutectic Si growth in A–Si-based alloys10.1016/j.actamat.2014.09.040 ↗
26. Cluster formation at the Si/liquid interface in Sr and Na modified Al–Si alloys10.1016/j.scriptamat.2016.02.018 ↗
27. On the formation of Al2Si2Sr phase and its behavior in Al–Si–Sr alloys10.1016/j.jallcom.2024.174023 ↗
28. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles10.1016/j.actamat.2015.09.057 ↗
29. Emergence of stable interfaces under extreme plastic deformation10.1073/pnas.1319436111 ↗
30. First-principles study on the interfacial segregation at coherent Cu precipitate/Fe matrix interface10.1016/j.scriptamat.2020.03.053 ↗
31. Improved mechanical and frictional properties of hypereutectic Al-Si alloy by modifying Si phase with La addition
32. Fabrication of hypereutectic Al-Si alloy with improved mechanical and thermal properties by hot extrusion10.1016/j.matchar.2023.113026 ↗
33. Influence of Mg on reaction and properties of Al-Si/TiC nanocomposites
34. Ni-rich phases in Al-12%Si-4%cu-1.2%Mn-x%Ni heat-resistant alloys and effect of Ni-alloying on tensile mechanical properties10.1007/s11665-019-04307-5 ↗
35. AlSi2Sc2 intermetallic formation in Al-7Si-0.3Mg-xSc alloys and their effects on as-cast properties10.1016/j.jallcom.2017.10.125 ↗
36. A new synergy to overcome the strength-ductility dilemma in Al-Si-Cu alloy by adding AlZrNiTi master alloy10.1016/j.msea.2024.147213 ↗
37. Natural aging-induced nanoprecipitation and its impact on tensile properties of Al–Si–Cu–Mg cast alloy10.1016/j.matchar.2024.114204 ↗
38. Optimizing the microstructure and enhancing the mechanical prsoperties of hypereutectic Al–Si alloys by Mg addition10.1016/j.jmrt.2024.07.204 ↗
39. Modification and strengthening mechanism of high strength-toughness as-cast Al–11Si–3Cu alloy modified with minor Sr and Er content10.1016/j.msea.2024.146670 ↗
40. Enhanced combination of strength and ductility in the semi-solid rheocast hypereutectic AlSi alloy with the effect of in-situ TiB2 particles10.1016/j.matchar.2021.111143 ↗
41. Understanding the influencing mechanism of sub-micron sized TiB2p on the microstructures and properties of rheological squeeze casting hypereutectic Al–Si alloys10.1016/j.jmrt.2021.06.048 ↗
42. Achieving the strength-ductility balance of boron nitride nanosheets/Al composite by designing the synergistic transition interface and intragranular reinforcement distribution10.1016/j.compositesb.2022.110243 ↗
43. Simultaneously enhancing strength and ductility in graphene nanoplatelets reinforced titanium (GNPs/Ti) composites through a novel three-dimensional interface design10.1016/j.compositesb.2021.108851 ↗
44. Synthesis, characterization and mechanical properties of in-situ (TiC-TiB2) reinforced magnesium matrix composite10.1016/j.matdes.2016.07.024 ↗
45. Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles10.1016/j.msea.2017.10.107 ↗
46. Surface severe plastic deformation induced solute and precipitate redistribution in an Al-Cu-Mg alloy10.1016/j.jallcom.2018.09.226 ↗
47. Hall-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
48. Microstructure and properties of copper coated graphene nanoplates reinforced Al matrix composites developed by low temperature ball milling10.1016/j.carbon.2019.12.029 ↗
49. Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites10.1016/j.matdes.2015.09.063 ↗
50. Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions10.1016/j.matdes.2019.107927 ↗
51. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites10.1016/j.actamat.2017.08.048 ↗
52. An analysis of strengthening mechanisms in a mechanically alloyed, oxide dispersion strengthened iron aluminide intermetallic10.1016/S1359-6454(02)00101-5 ↗
53. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
54. Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles10.1016/j.scriptamat.2011.06.037 ↗