journal article·2016-01

The distribution and mechanism of pore formation in copper foams fabricated by Lost Carbonate Sintering method

Mohammad Hosein Shahzeydi, Amir Masoud Parvanian, Masoud Panjepour

Publisher page

Abstract

Abstract In this research, utilizing X-ray computed tomography (XCT), geometrical characterization, and pore formation mechanisms of highly porous copper foams manufactured by powder metallurgical (PM) process are investigated. Open-cell copper foams with porosity percentages of 60% and 80% and with a pore size within the range of 300–600 μm were manufactured by using potassium carbonate as a space holder agent via the Lost Carbonate Sintering (LCS) technique. XCT and SEM were also employed to investigate the three-dimensional structure of foams and to find the effect of the parameters of the space holders on the structural properties of copper foams. The result showed an excellent correlation between the structural properties of the foams including the size and shape of the pores, porosity percentage, volume percentage, particle size, and the shape of the sacrificial agent used. Also, the advanced image analysis of XCT images indicated fluctuations up to ± 10% in porosity distribution across different cross-sections of the foams. Simultaneous thermal analysis (STA: DTA–TG) was also used to study the thermal history of the powders used during the manufacturing process of the foams. The results indicated that the melting and thermal decomposition of the potassium carbonate occurred simultaneously at 920 °C and created the porous structure of the foams. By combining the STA result with the result of the tension analysis of cell walls, the mechanisms of open-pore formation were suggested. In fact, most open pores in the samples were formed due to the direct contact of potassium carbonate particles with each other in green compact. Also, it was found that the thermal decomposition of potassium carbonate particles into gaseous CO2 led to the production of gas pressure inside the closed pores, which eventually caused the creation of cracks on the cell walls and the opening of the pores in foam's structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Aluminum Alloys Composites Properties · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Manufacture, characterization and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
2. Ashby · 2000
3. Mechanical behavior improvement of open-pore copper foams synthesized through space holder technique10.1016/j.matdes.2013.01.077 ↗
4. A novel method for making open cell aluminum foams by powder sintering process10.1016/j.matlet.2005.05.068 ↗
5. Optimisation of compaction and liquid-state sintering in sintering and dissolution process for manufacturing Al foams10.1016/j.msea.2003.08.004 ↗
6. Production of graded aluminum foams via powder space holder technique10.1016/j.matdes.2012.04.024 ↗
7. Effects of porosity on corrosion resistance of Mg alloy foam produced by powder metallurgy technology10.1016/j.matchar.2014.07.012 ↗
8. Titanium-cenosphere syntactic foam made through powder metallurgy route10.1016/j.matdes.2011.07.055 ↗
9. Composite metal foams processed through powder metallurgy10.1016/j.matdes.2007.01.026 ↗
10. Lost carbonate sintering process for manufacturing metal foams10.1016/j.scriptamat.2004.10.012 ↗
11. Production of aluminum foam by spherical carbamide space holder technique-processing parameters10.1016/j.matdes.2010.04.038 ↗
12. Open-celled porous Cu prepared by replication of NaCl space-holders10.1016/j.msea.2009.10.062 ↗
13. Effects of carbamide shape and content on processing and properties of steel foams10.1016/j.jmatprotec.2012.05.015 ↗
14. A novel sintering-dissolution process for manufacturing Al foams10.1016/S1359-6462(00)00548-0 ↗
15. Imaging of metallic foams using X-ray micro-CT10.1016/j.colsurfa.2009.01.008 ↗
16. Structure and deformation correlation of closed-cell aluminium foam subject to uniaxial compression10.1016/j.actamat.2012.02.029 ↗
17. Three-dimensional real structure-based finite element analysis of mechanical behavior for porous titanium manufactured by a space holder method10.1016/j.commatsci.2014.10.020 ↗
18. Three-dimensional reconstruction and morphologic characteristics of porous metal fiber sintered sheet10.1016/j.matchar.2013.09.009 ↗
19. Micro-CT analysis and mechanical properties of Ti spherical and polyhedral void composites made with saccharose as a space holder material10.1016/j.matchar.2014.12.006 ↗
20. Geometric classification of open-cell metal foams using X-ray micro-computed tomography10.1016/j.matchar.2012.10.001 ↗
21. 3D morphological analysis of copper foams as current collectors for Li-ion batteries by means of X-ray tomography10.1016/j.mseb.2014.04.006 ↗
22. The effects of manufacturing parameters on geometrical and mechanical properties of copper foams produced by space holder technique10.1016/j.matdes.2013.07.047 ↗
23. www.matweb.com.
24. Ivensen · 1973
25. Stochastic modelling of removability of NaCl in sintering and dissolution process to produce Al foams10.1023/A:1026079612440 ↗
26. A tension analysis during oxidation of pure aluminum powder particles: non-isothermal condition10.1007/s11085-014-9488-1 ↗
27. Tensile properties of copper, nickel, and 70-percent-copper-30-percent-nickel and 30-percent-copper-70-PercentNickel alloys at high temperatures10.6028/jres.058.027 ↗