journal article·2023-01

Balanced strength-ductility combination and good recoverable strain of Ni50.7Ti49.3 alloy fabricated by high scanning velocity in selective laser melting

W.S. Cai, Y. Luo, A. Yan, L.M. Kang, L.C. Zhang, C. Suryanarayana, C. Yang

Publisher page

Abstract

Optimizing of process parameters such as high laser power combined with high scanning velocity during selective laser melting (SLM) caters to the demand of high efficiency and high precision fabrication of NiTi alloys. However, the exploration in such process window is inexhaustive yet. In this work, SLM parameters of high laser power combined with high scanning velocity (180 W and 800–1400 mm/s) are adopted to manufacture defect-free Ni 50.7Ti 49.3 alloy and the microstructure, martensitic transformation, mechanical and functional properties are studied systematically. The microstructure of SLM samples is composed of alternate coarse and fine columnar grains in different regions of molten pool. Unique square grain structure is formed in the top surface. Consequently, the prepared Ni 50.7Ti 49.3 samples exhibit balanced strength-ductility combination with tensile strength of 804.6–870.0 MPa and ductility of 6.4–8.1%. Good recoverable strain of 3.4%–4.7% and recovery ratio of 83.1%–88.9% is achieved. Basically, the change in the recoverable strain for the prepared samples at different scanning velocities are discussed based on thermodynamics analysis. The findings in this work provide some insights into design and preparation of high-performance NiTi alloys by SLM.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Shape Memory Alloy Transformations · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. My experience with Ti–Ni-based and Ti-based shape memory alloys10.1007/s40830-017-0122-3 ↗
2. Relationship between crystallographic compatibility and thermal hysteresis in Ni-rich NiTiHf and NiTiZr high temperature shape memory alloys10.1016/j.actamat.2016.08.065 ↗
3. Physical metallurgy of Ti–Ni-based shape memory alloys
4. A review of selective laser melted NiTi shape memory alloy10.3390/ma11040519 ↗
5. Circumventing the strength–ductility trade-off of β-type titanium alloys by defect engineering during laser powder bed fusion
6. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
7. Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects
8. Effect of SLM parameters on transformation temperatures of shape memory nickel titanium parts10.1002/adem.201300558 ↗
9. Towards understanding metallurgical defect formation of selective laser melted wrought aluminum alloys
10. Design of titanium alloys by additive manufacturing: a critical review
11. Microstructure of selective laser melted nickel–titanium10.1016/j.matchar.2014.05.017 ↗
12. Tailoring selective laser melting process parameters for NiTi implants10.1007/s11665-012-0318-9 ↗
13. A sensory material approach for reducing variability in additively manufactured metal parts10.1038/s41598-017-03499-x ↗
14. Micro selective laser melting of NiTi shape memory alloy: defects, microstructures and thermal/mechanical properties10.1016/j.optlastec.2020.106374 ↗
15. On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing10.1088/0964-1726/23/10/104002 ↗
16. Constructing function domains in NiTi shape memory alloys by additive manufacturing10.1080/17452759.2022.2053821 ↗
17. The interaction effect of process parameters on the phase transformation behavior and tensile properties in additive manufacturing of Ni-rich NiTi alloy10.1016/j.jmapro.2022.03.027 ↗
18. Evolution of functional properties realized by increasing laser scanning speed for the selective laser melting fabricated NiTi alloy10.1016/j.jallcom.2019.06.340 ↗
19. Microstructure and mechanical property of additively manufactured NiTi alloys: a comparison between selective laser melting and directed energy deposition10.1007/s11771-021-4677-y ↗
20. Toward low and high cycle fatigue behavior of SLM-fabricated NiTi: considering the effect of build orientation and employing a self-heating approach10.1016/j.ijmecsci.2020.105878 ↗
21. Texture and anisotropy in selective laser melting of NiTi alloy10.1016/j.msea.2015.10.032 ↗
22. Study on variations of microstructure and metallurgical properties in various heat-affected zones of SLM fabricated Nickel–Titanium alloy10.1016/j.msea.2020.138919 ↗
23. Effects of size and geometry on the thermomechanical properties of additively manufactured NiTi shape memory alloy10.1007/s00170-020-05071-w ↗
24. Multi-scale shape memory effect recovery in NiTi alloys additive manufactured by selective laser melting and laser directed energy deposition10.1016/j.jmatprotec.2017.06.027 ↗
25. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi10.1016/j.actamat.2017.10.072 ↗
26. Thermomechanical characterization of Ni-rich NiTi fabricated by selective laser melting10.1088/0964-1726/25/3/035005 ↗
27. Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys10.1016/j.msea.2017.01.008 ↗
28. The influence of heat treatment on the thermomechanical response of Ni-rich NiTi alloys manufactured by selective laser melting10.1016/j.jallcom.2016.03.161 ↗
29. Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting10.1016/j.msea.2018.03.072 ↗
30. Mechanical and shape memory properties of porous Ni50.1Ti49.9 alloys manufactured by selective laser melting10.1016/j.jmbbm.2017.01.047 ↗
31. Controlling martensitic transformation characteristics in defect-free NiTi shape memory alloys fabricated using laser powder bed fusion and a process optimization framework10.1016/j.actamat.2021.117017 ↗
32. Laser powder bed fusion of defect-free NiTi shape memory alloy parts with superior tensile superelasticity10.1016/j.actamat.2022.117781 ↗
33. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
34. Study on properties of SLM-NiTi shape memory alloy under the same energy density10.1016/j.jmrt.2021.04.058 ↗
35. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
36. Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting10.1016/j.actamat.2021.117261 ↗
37. Ultrahigh-performance TiNi shape memory alloy by 4D printing10.1016/j.msea.2019.138166 ↗
38. Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting
39. The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability
40. Laser beam energy dependence of martensitic transformation in SLM fabricated NiTi shape memory alloy10.1016/j.mtla.2019.100305 ↗
41. Asymmetry of stress–strain curves under tension and compression for NiTi shape memory alloys10.1016/S1359-6454(98)00112-8 ↗
42. Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting10.1016/j.jmatprotec.2018.08.049 ↗
43. Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young’s modulus10.1016/j.scriptamat.2016.12.038 ↗
44. Study on corrosion behavior of the selective laser melted NiTi alloy with superior tensile property and shape memory effect10.1016/j.corsci.2020.108891 ↗
45. Prediction of SLM-NiTi transition temperatures based on improved Levenberg–Marquardt algorithm10.1016/j.jmrt.2021.09.149 ↗
46. Large tunable elastocaloric effect in additively manufactured Ni–Ti shape memory alloys10.1016/j.actamat.2020.04.007 ↗
47. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2010.02.019 ↗
48. Criteria for pseudoelasticity in near-equiatomic NiTi shape memory alloys10.1016/S1359-6454(97)00144-4 ↗
49. Effect of annealing on the transformation behavior and superelasticity of NiTi shape memory alloy10.1016/S1359-6462(01)01005-3 ↗
50. Anisotropic microstructure and superelasticity of additive manufactured NiTi alloy bulk builds using laser directed energy deposition10.1016/j.msea.2016.07.059 ↗
51. Fatigue behavior and cyclic deformation of additive manufactured NiTi10.1016/j.jmatprotec.2017.10.006 ↗
52. Microstructure and properties of equiatomic Ti–Ni alloy fabricated by selective laser melting10.1016/j.msea.2019.138586 ↗
53. Graded functionality obtained in NiTi shape memory alloy via a repetitive laser processing strategy10.1016/j.jmatprotec.2021.117177 ↗
54. Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication
55. Process development and characterization of additively manufactured nickel–titanium shape memory parts10.1177/1045389X16635848 ↗
56. Selective laser melting of NiTi alloy with superior tensile property and shape memory effect10.1016/j.jmst.2019.05.015 ↗
57. Effects of microstructure on fatigue crack propagation behavior in a bi-modal TC11 titanium alloy fabricated via laser additive manufacturing10.1016/j.jmst.2018.10.031 ↗
58. Overcoming the strength–ductility trade-off by tailoring grain-boundary metastable Si-containing phase in β-type titanium alloy10.1016/j.jmst.2020.06.053 ↗
59. Additive manufacturing of NiTi shape memory alloys using pre-mixed powders10.1016/j.jmatprotec.2019.03.025 ↗
60. Simultaneous enhancement of mechanical and shape memory properties by heat-treatment homogenization of Ti2Ni precipitates in TiNi shape memory alloy fabricated by selective laser melting10.1016/j.jmst.2021.06.019 ↗
61. Thermally- and stress-induced thermoelastic martensitic transformations in the reference frame of equilibrium thermodynamics10.1016/0079-6425(93)90005-6 ↗
62. Thermodynamics of thermoelastic martensitic transformations10.1016/0001-6160(89)90175-2 ↗