journal article·2021-12

Effect of tungsten mesh interlayer on microstructure and mechanical performance of A6061/Ti6Al4V dissimilar joints

Zhijie Zhang, Jian Huang, Yuchun Dai, Xing Zhang, Chengwu Yao

Publisher page

Abstract

Abstract A novel method of laser welding-brazing A6061/Ti6Al4V with the assistance of a tungsten mesh interlayer was proposed. The spreading and wetting abilities of the molten aluminum on the Ti6Al4V surface were improved by the addition of the tungsten mesh. Al5(Ti, W) and Al18Mg3W2 were observed as second phases in the aluminum weld, which was a benefit to refine the aluminum grains and improve the mechanical properties of the aluminum weld. The Al3(Ti, W) layer and the (Al, Si)3Ti layer were observed at the Ti/Al interface. W and Si atoms substituted Ti and Al atoms in Al3Ti, respectively. W element distributed unevenly in the Al3(Ti, W) layer and segregated at the grain boundaries of the Al3(Ti, W) phases. D022-Al3(Ti, W) was transformed into L12-Al3(Ti, W) at the grain boundaries resulting from the segregation. The c/a value of the (Al, Si)3Ti crystal lattice was higher than that of Al3Ti. Nanohardness and elastic modulus of the (Al, Si)3Ti phase were higher than those of the Al3(Ti, W) phase. The tensile shear capacity and ductility of the A6061/Ti6Al4V joints with tungsten mesh were better than those of the joints without tungsten mesh at the same welding parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Challenges and advances in laser welding of dissimilar light alloys: Al/Mg, Al/Ti, and Mg/Ti alloys10.1007/s00170-017-1565-6 ↗
2. Light-weighting in aerospace component and system design10.1016/j.jppr.2018.04.001 ↗
3. In-situ synthesis of TiC nanoparticles during joining of SiC ceramic and GH99 superalloy10.1111/jace.16541 ↗
4. Microstructural evolution and mechanical characterization of Nb-interlayer-inserted Ti-6Al-4V/Si3N4 joints brazed with AuNiTi filler10.1016/j.msea.2020.139093 ↗
5. Brazing TC4 alloy to Si3N4 ceramic using nano-Si3N4 reinforced AgCu composite filler10.1016/j.matdes.2015.03.046 ↗
6. Brazing of porous Si3N4 ceramic to invar alloy with a novel Cu-Ti filler alloy: microstructure and mechanical properties10.1016/j.ceramint.2020.09.039 ↗
7. Design of multi-layered architecture in dissimilar ceramic/metal joints with reinforcements clustering away from both substrates10.1016/j.matdes.2020.109379 ↗
8. Brazing of ZrB2-SiC-C ceramic and GH99 superalloy to form reticular seam with low residual stress10.1016/j.ceramint.2014.08.051 ↗
9. An investigation of residual stresses in brazed cubic boron nitride abrasive grains by finite element modelling and Raman spectroscopy10.1016/j.matdes.2015.08.039 ↗
10. Research on interfacial layer of laser-welded aluminum to titanium10.1016/j.matchar.2019.06.012 ↗
11. Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove10.1016/j.msea.2012.09.044 ↗
12. Effect of laser-arc offset and laser-deviation angle on the control of a Ti-Al interlayer10.1016/j.jmatprotec.2019.04.010 ↗
13. Improving interfacial properties of a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications10.1007/s10853-010-4719-6 ↗
14. Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process10.1016/j.jallcom.2010.09.125 ↗
15. First-principles calculation on the structural, elastic and thermodynamic properties of Ti-Al intermetallics10.1088/2053-1591/ab3e11 ↗
16. Combined laser beam welding and brazing process for aluminium titanium hybrid structures
17. Influence of Si content on interfacial reactions and mechanical properties of dual-spot laser welded-brazed Ti/Al joints10.1016/j.jmapro.2020.06.001 ↗
18. Development of a low-melting-point filler metal for brazing aluminum alloys10.1007/s11661-000-0141-z ↗
19. Effects of zinc additions on the microstructure and melting temperatures of Al-Si-Cu filler metals10.1016/S1044-5803(02)00276-0 ↗
20. Joining 6061 aluminum alloy with Al-Si-Cu filler metals10.1016/j.jallcom.2009.08.056 ↗
21. Ultrasonic-assisted brazing of Al-Ti dissimilar alloy by a filler metal with a large semi-solid temperature range10.1016/j.matdes.2016.01.109 ↗
22. Microstructural characterization and mechanical properties of Al/Ti joint welded by CMT method-assisted hybrid magnetic field10.1016/j.matdes.2016.12.025 ↗
23. Response of fcc metals and L1(2) and D0(22) type trialuminides to uniaxial loading along 100 and 001 : ab initio DFT calculations10.1080/14786435.2010.523720 ↗
24. A comprehensive DFT study on the thermodynamic and mechanical properties of L1(2)-Al3Ti/Al interface10.1016/j.vacuum.2020.109858 ↗
25. Mechanical behaviour of Al3Ti intermetallic and Ll(2) phases on its basis10.1016/S0966-9795(01)00073-5 ↗
26. Synthesis and stability of Ll(2)-Al3Ti by mechanical alloying10.1016/j.msea.2003.09.097 ↗
27. High strength nanocrystalline Ll(2)-Al-3(Ti,Zr) intermetallic synthesized by mechanical alloying10.1016/j.intermet.2006.02.003 ↗
28. Multi-doping effect on ductility of TiAl3: a DFT study10.1007/s12540-018-00213-y ↗
29. A DFT study on brittle-to-ductile transition of D0(22)-TiAl3 using multi-doping and strain-engineered effects10.1016/j.jmst.2020.02.053 ↗
30. Vacancy-induced brittle to ductile transition of W-M co-doped Al3Ti (M=Si, Ge, Sn and Pb)10.1038/s41598-017-14398-6 ↗
31. Structural stability, mechanical properties and stacking fault energies of TiAl3 alloyed with Zn, Cu, Ag: first-principles study10.1016/j.jallcom.2016.01.106 ↗
32. The influence of Zr alloying on the structure and properties of Al3Ti10.1016/S0966-9795(02)00234-0 ↗
33. TIG welding-brazing of Ti6Al4V and Al5052 in overlap configuration with assistance of zinc foil10.1016/j.jmatprotec.2017.08.015 ↗
34. Cold metal transfer welding-brazing of pure titanium TA2 to aluminum alloy 6061-T610.1002/adem.201600494 ↗
35. Joining aluminum to titanium alloy by friction stir lap welding with cutting pin10.1016/j.matchar.2012.05.013 ↗
36. Effects of AlSi12 interlayer on microstructure and mechanical properties of laser welded 5A06/Ti6Al4V joints10.1007/s40194-021-01129-9 ↗
37. Dynamics of wetting in reactive metal/ceramic systems
38. Wetting under chemical equilibrium and nonequilibrium conditions10.1021/j100605a009 ↗
39. Thermodynamic prediction of interface phases at cu/solder joints10.1007/s11664-998-0065-8 ↗
40. Morphology of wetting reactions of SnPb alloys on Cu as a function of alloy composition10.1557/JMR.1998.0006 ↗
41. Si diffusion behavior during laser welding-brazing of Al alloy and Ti alloy with Al-12Si filler wire10.1016/S1003-6326(09)60098-4 ↗