Improve the ductility of a nickel based superalloy by optimizing secondary phase distribution through grain boundary engineering
Source abstract
Abstract
Abstract The microstructure and high temperature tensile property of grain boundary engineering (GBE) treated GH984 alloy was studied by electron backscattering diffraction, scanning electron microscopy and transmission electron microscopy. After GBE treatment, the fraction of low Σ coincidence site lattice (CSL) grain boundary increases from 43.1% to 76.9%. The grain boundary network and grain boundary precipitation distribution were optimized by GBE treatment. During aging at 800 °C for 160, 320 and 640 h, the needle-like η phase and M23C6 carbide precipitated at grain boundaries, both have coherent orientation relationship with matrix. The morphology and distribution of precipitates at grain boundaries with various characters are different. The η phase is parallel distributed along coherent Σ3 grain boundary, perpendicularly precipitated at both side of incoherent Σ3 grain boundary, while only precipitated at one side of Σ9, Σ27 and random grain boundaries. Few fine carbide particles precipitated at Σ3 grain boundary, the larger carbide precipitated at Σ9, Σ27 and random grain boundaries. The high temperature ductility of GBE sample is improved compared with that of solution annealed sample under the same aging treatment. According to the experimental results, the effects of grain boundary characters on the precipitation behaviors of η phase and carbide, and their influences on the mechanical properties were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Effects of alloying elements on thermal expansion behavior of Ni-Fe-Cr-based superalloys10.1007/s11661-018-4898-3 ↗
2. U.S. program on materials technology for ultra-supercritical coal power plants10.1361/10599490524039 ↗
3. Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure10.1016/j.msea.2016.06.018 ↗
4. Microstructural stability and mechanical properties of a boron modified Ni-Fe based superalloy for steam boiler applications10.1016/j.msea.2015.05.026 ↗
5. Microstructure evolution and mechanical properties of GH984G alloy with different Ti/Al ratios during long-term thermal exposure10.1016/j.matdes.2014.05.020 ↗
6. Thermal stability of a new Ni-Fe-Cr base alloy with different Ti/Al ratios10.1016/j.jmst.2014.07.008 ↗
7. The effects of Co and Ti additions on microstructures and compressive strength of Udimet71010.1016/j.msea.2011.07.019 ↗
8. Relationship between Ti/Al ratio and stress-rupture properties in nickel-based superalloy10.1016/j.msea.2012.03.006 ↗
9. Effect of boron on the microstructure, mechanical properties and hydrogen performance in a modified A28610.1016/j.msea.2010.05.070 ↗
10. Effect of grain boundary misorientation on η phase precipitation in Ni-base superalloy 718Plus10.1016/j.matchar.2019.02.038 ↗
11. Precipitation mechanism of secondary η phase in Fe-Ni based alloy
12. Retarding the precipitation of η phase in Fe-Ni based alloy through grain boundary engineering10.1016/j.jmst.2020.02.018 ↗
13. Correlation among grain boundary character, carbide precipitation and deformation in Alloy 69010.1080/14786435.2019.1628370 ↗
14. Microstructure of long-term aged IN617 Ni-base superalloy10.1007/s11661-008-9618-y ↗
15. Effects of the triple junction types on the grain boundary carbide precipitation in a nickel-based superalloy, a statistical analysis10.1080/14786435.2018.1539263 ↗
16. Investigation and improvement on structural stability and stress rupture properties of a Ni-Fe based alloy10.1016/j.matdes.2015.09.098 ↗
17. On a more restrictive geometric criterion for “special” CSL grain boundaries10.1016/S1359-6462(98)00077-3 ↗
18. Appling grain boundary engineering to Alloy 690 tube for enhancing intergranular corrosion resistance10.1016/j.jnucmat.2011.06.017 ↗
19. Grain cluster microstructure and grain boundary character distribution in Alloy 69010.1007/s11661-009-0035-7 ↗
20. Precipitation of η phase and its effects on stress rupture properties of K4750 alloy10.1016/j.msea.2019.138137 ↗
21. Cellular η phase precipitation and its effect on the tensile properties in an Fe-Ni-Cr alloy
22. Grain-boundary plane reorientation in copper10.1080/01418619908210299 ↗
23. The role of Σ9 boundaries in grain boundary engineering10.1007/s11661-010-0302-7 ↗
24. Effect of grain boundary character distribution on hydrogen embrittlement in Fe-Ni based alloy10.1016/j.msea.2020.139201 ↗
25. Correlation between grain boundary character distribution and δ-phase precipitation in nickel-based superalloy 71810.1016/j.jmrt.2019.12.011 ↗
26. The effects of heat treatment on the chromium depletion, precipitate evolution, and corrosion resistance of Inconel alloy 69010.1007/BF02650292 ↗
27. A grain boundary characterization study of boron segregation and carbide precipitation in alloy 304 austenitic stainless steel10.1016/j.scriptamat.2005.11.055 ↗
28. Mechanism of primary MC carbide decomposition in Ni-base superalloys10.1007/s11661-004-0076-x ↗
29. Microstructural evolution and mechanical properties of solution annealed cast IN617B alloy during long-term thermal exposure10.1016/j.msea.2017.08.011 ↗
30. A possibility to synchronously improve the high-temperature strength and ductility in face-centered cubic metals through grain boundary engineering10.1016/j.scriptamat.2020.06.026 ↗
31. Microstructure stability and mechanical properties of a new low cost hot-corrosion resistant Ni–Fe–Cr based superalloy during long-term thermal exposure10.1016/j.matdes.2014.12.030 ↗