journal article·2010-03

Microstructural characterization and influence of manufacturing parameters on technological properties of vitreous ceramic materials

D. Njoya, M. Hajjaji, A. Baçaoui, D. Njopwouo

Materials Characterization· Volume 61· Issue 3
Publisher page

Abstract

Abstract Microstructure of vitreous ceramic samples manufactured from kaolinitic-clay and feldspars raw materials from Cameroon was investigated in the range 1150–1250 °C by X-ray diffraction and scanning electron microscopy and by measuring some technological properties. Moreover, the simultaneous influence of feldspars content, heating temperature and soaking time on water absorption and firing shrinkage was evaluated by adopting the response surface methodology (Doehlert matrix), using the New Efficient Methodology for Research using Optimal Design (NEMROD) software. The results show that a spinel phase, mullite, glassy phase and some amount of hematite were formed. However, the spinel phase and potassic feldspar, as compared to the sodic one, disappeared at moderate firing temperature and soaking time. Apparently, mullite developed from spinel phase, which is formed from the demixion of metakaolin. On the other hand, it is found that the effects of fluxing content and firing temperature on the measured properties were almost similar and more influent than soaking time. Antagonistic and synergetic interactions existed between the considered parameters, and their importance differed for the considered properties. By using this mathematical tool, suitable operating conditions for manufacturing vitreous bodies were determined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Mullite formation in clays and clay-derived vitreous ceramics10.1016/j.jeurceramsoc.2007.03.009 ↗
2. Munier · 1957
3. Etude sur le vitreous sanitaire
4. Les céramiques
5. Influence of lithium oxide as auxiliary flux on the properties of triaxial porcelain bodies10.1016/j.jeurceramsoc.2005.01.036 ↗
6. Comportement d'une pâte céramique vitreous en cuisson accélérée: influence des différents constituants et de leurs propriétés
7. Effect of firing conditions, filler grain size and quartz content on bending strength and physical properties of sanitaryware porcelain10.1016/j.jeurceramsoc.2003.07.003 ↗
8. Traditional and glass powder porcelain: technical and microstructure analysis10.1016/j.jeurceramsoc.2003.08.003 ↗
9. Wet-pressing of handles in table porcelain manufacturing10.1016/j.jeurceramsoc.2006.05.074 ↗
10. Effect of quartz sand replacement by agate rejects in triaxial porcelain10.1016/j.jhazmat.2008.06.094 ↗
11. Effect of pyrophyllite on the mullitization in triaxial porcelain system10.1016/j.ceramint.2008.08.002 ↗
12. Microstructural evolution in clay-based ceramics I: Single components and binary mixtures of clay, flux, and quartz filler10.1111/j.1551-2916.2008.02393.x ↗
13. Microstructural evolution in clay-based ceramics II: ternary and quaternary mixtures of clay, flux, and quartz filler10.1111/j.1551-2916.2008.02394.x ↗
14. Effect of firing temperature on sintering of porcelain stoneware tiles10.1016/j.ceramint.2007.06.006 ↗
15. Microstructural variation in porcelain stoneware as a function of flux system10.1111/j.1151-2916.2004.tb06347.x ↗
16. Uniform shell design10.2307/2346327 ↗
17. N. Salhi, Application de la méthodologie de la recherche expérimentale à l'étude et à l'optimisation de la pyrolyse des schistes bitumineux marocains (Timahdit- M et Tarfaya-R). Thèse Doctorat d'Etat, Faculté des Sciences – Semlalia; Université Cadi Ayyad Marrakech (Maroc), (1995) 165 p.
18. Optimization of condition for the preparation of activated carbons from olive-waste cakes10.1016/S0008-6223(00)00135-4 ↗
19. Use of factorial design and Doehlert Matrix for multivariate optimization of an on-line preconcentration system for lead determination by flame atomic absorption spectrometry10.1007/s00216-002-1695-y ↗
20. Simultaneous optimization of linear shrinkage and water absorption of triaxial ceramic bodies using experiments design10.1016/j.ceramint.2003.10.013 ↗
21. Using statistical techniques to model the flexural strength of dried triaxial ceramic bodies10.1016/j.jeurceramsoc.2003.09.009 ↗
22. Doehlert Matrix: a chemometric tool for analytical chemistry — Review10.1016/j.talanta.2004.01.015 ↗
23. Evaluation of the simultaneous effects of firing cycle parameters on technological properties and ceramic suitability of raw clay using the response surface methodology10.1111/j.1551-2916.2006.00955.x ↗
24. Biffi · 1995
25. The influence of shaping and firing technology on ceramic properties of calcareous and non-calcareous illitic–chloritic clays10.1016/S0169-1317(01)00076-X ↗
26. Genesis of Mayouom kaolin deposit (Western Cameroon)10.1016/j.clay.2005.11.005 ↗
27. Contribution à l'étude physico — chimique et minéralogique des argiles de Mayouom (Cameroun)10.3166/acsm.32.55-68 ↗
28. Kaolin from Mayouom (Western Cameroon): industrial suitability evaluation10.1016/j.clay.2008.07.019 ↗
29. Effect of pyrophyllite on vitrification and on physical properties of triaxial porcelain10.1016/j.ceramint.2005.07.002 ↗
30. Mathieu · 1980
31. Effect of varying quartz particle size and firing atmosphere on densification of Brazilian clay-based stoneware10.1111/j.1551-2916.2006.00986.x ↗
32. Phase transformation and growth of mullite in kaolin ceramics10.1016/S0955-2219(03)00631-9 ↗
33. Properties related phase evolution in porcelain ceramics10.1016/j.jeurceramsoc.2007.02.096 ↗
34. Microstructural evolution in triaxial porcelain10.1111/j.1151-2916.2000.tb01692.x ↗