In-situ study the crack initiation mechanism of P92 steel under high-temperature three-point bending fatigue process
Source abstract
Abstract
Various prior austenite grain size (PAGS) of the P92 specimens were obtained after annealing at 950 °C for different times. In-situ three-points bending fatigue tests were carried out to study the crack initiation mechanisms from 550 °C to 650 °C. Results revealed that the microstructure with large PAGS exhibits better cracking resistance during the fatigue process, which restricts the sliding of prior austenite grain boundary (PAGB) and tends to generate large and sparse cracks. Reducing PAGS promotes the plastic deformation and leads to the fast accumulation of fatigue damage at the initial fatigue stage. Fatigue crack at 550 °C is initiated at the prefabricated notch root, which progresses along a specific route mainly due to the intracrystalline slipping mechanism. However, as the temperature increases to 650 °C, sliding of PAGB is enhanced and it mobilizes a larger region coordinating the plastic deformation, ultimately leads to the opening of the notches. Three typical crack models are established based on the evolution of microstructures both on specimen surface and interior. Moreover, a modified θ projection method is proposed trying to predict the accumulated fatigue damage, of which the physical concepts behind the θ parameters are discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Yan · 2015
2. Microstructure evolution of fine-grained heat- affected zone of gr.92 steel welded joint during creep10.1007/s11661-019-05245-6 ↗
3. Cyclic deformation behavior and life prediction of P92 steel welded joints under thermomechanical fatigue loadings10.1016/j.ijfatigue.2021.106183 ↗
4. Effect of temperature range on thermal- mechanical fatigue properties of P92 steel and fatigue life prediction with a new cyclic softening model10.1016/j.ijfatigue.2019.105226 ↗
5. Frequency and hold time influence on crack growth behavior of a 9-12% Cr ferritic martensitic steel at temperatures from 300 °C to 600 °C in air10.1016/j.ijfatigue.2018.03.012 ↗
6. Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel10.1016/j.ijpvp.2022.104873 ↗
7. Creep-fatigue of P92 in service-like tests with combined stress- and strain-controlled dwell times10.1016/j.ijfatigue.2022.107381 ↗
8. Hosford · 2005
9. Failure of metals II: fatigue10.1016/j.actamat.2015.05.050 ↗
10. Creep constitutive equations for as-received 9Cr1Mo steel10.1016/j.ijpvp.2019.103947 ↗
11. A physically-based method for predicting high temperature fatigue crack initiation in P91 welded steel10.1016/j.ijfatigue.2021.106480 ↗
12. A universal constitutive model for hybrid stress-strain controlled creep-fatigue deformation10.1016/j.ijmecsci.2022.107369 ↗
13. A study of the creep behavior of modified 9Cr-1Mo steel using continuum-damage modeling10.1016/j.ijplas.2012.04.004 ↗
14. Insight into the creep-fatigue interaction and remaining creep damage mechanisms in different micro-regions of 9%Cr steel welded joints10.1016/j.matchar.2022.111777 ↗
15. Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel10.1016/j.mechmat.2019.01.006 ↗
16. The effect of cyclic loading on the creep fatigue life and creep strength of a DS superalloy: damage mechanism and life modeling10.1016/j.ijfatigue.2019.105452 ↗
17. An improved unified viscoplastic model for modelling low cycle fatigue and creep fatigue interaction loadings of 9-12%Cr steel
18. The high cycle fatigue behavior, failure characteristics, and fatigue life empirical relationship of 9% Cr steel under different stress ratios at 630 °C10.1016/j.ijfatigue.2023.107534 ↗
19. Evaluation of local stress state due to grain-boundary sliding during creep within a crystal plasticity finite element multi-scale framework10.1016/j.ijmecsci.2021.106715 ↗
20. Coupled model for grain rotation, dislocation plasticity and grain boundary sliding in fine-grained solids10.1016/j.ijplas.2020.102776 ↗
21. Effect of the strain rate on the low cycle fatigue behavior of a 10Cr-2W-Mo- 3Co-NbV steel at 650 °C10.1016/j.ijfatigue.2017.03.025 ↗
22. Low cycle fatigue behavior and microstructure evolution of a novel 9Cr- 3W-3Co tempered martensitic steel at 650 °C10.1016/j.msea.2018.06.071 ↗
23. A quasi in-situ study on the deformation mechanism in a 2.2Cr heat resistant steel
24. Experimental study on creep-fatigue behaviors of chinese P92 steel with consideration of several important factors10.1016/j.ijfatigue.2020.105900 ↗
25. Diffusional mass flux accommodating two-dimensional grain boundary sliding in ODS ferritic steel10.1016/j.actamat.2019.06.049 ↗
26. Effects of prior austenite grain boundaries on high-temperature fatigue properties of a 2.2Cr heat resistant steel10.1016/j.ijfatigue.2021.106254 ↗
27. Hot embrittlement and effect of grain size on hot ductility of martensitic heat-resistant steels10.1016/j.msea.2016.09.072 ↗
28. Temperature and ΔK dependence of grain boundary effect on fatigue crack propagation in a two-dimensional polycrystalline Ni-base superalloy10.1016/j.actamat.2022.118288 ↗
29. A modified θ projection model for constant load creep curves-I Introduction of the model10.1016/j.jmst.2018.09.024 ↗
30. 2012 · 6398
31. Experimental determination of the reversed plastic zone size around fatigue crack using digital image correlation10.1016/j.tafmec.2023.103901 ↗
32. Fatigue crack growth behavior of marine steel under variable amplitude loading-combining DIC technique and SEM observation10.1016/j.ijfatigue.2023.107508 ↗
33. Hummphreys · 2004
34. Creep-fatigue crack growth behavior of G115 steel under different hold time conditions10.1016/j.ijfatigue.2018.07.010 ↗
35. In-situ SEM study on fatigue crack behavior of a nickel-based single crystal alloy at 950 °C and 1050 °C
36. Microstructure relevant fatigue short crack propagation behavior of Al0.3CoCrFeNi high entropy alloy: in-situ SEM study
37. On the secondary cracks during crack propagation in anAl-Si-cu-mg alloy: an in-situ study10.1016/j.matchar.2023.113046 ↗
38. Three-point-bending fatigue behavior of AZ31B magnesium alloy based on infrared thermography technology10.1016/j.ijfatigue.2016.10.013 ↗
39. The smooth and notched three-point bending fatigue behavior of directionally solidified high-Nb TiAl alloy10.1016/j.matchar.2021.111444 ↗
40. Cyclic plastic deformation response at fatigue crack tips10.1016/j.ijpvp.2012.10.007 ↗
41. In-situ observation of strain evolution and ratchetting of growing fatigue cracks10.1016/j.engfracmech.2022.109041 ↗
42. Grain boundary-slip bands interactions: impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloy10.1016/j.actamat.2015.08.009 ↗
43. Effect of microstructure on the fatigue crack growth behavior of 9%Cr martensitic steel at different stress ratios under 630 °C10.1016/j.ijfatigue.2023.107796 ↗
44. Influence of dynamic strain aging pre-treatment on the low-cycle fatigue behavior of modified 9Cr-1Mo steel10.1016/j.ijfatigue.2012.07.011 ↗
45. Comparative study of θ projection method and its modified forms on creep life prediction10.1002/srin.202200270 ↗