journal article·2022-02

Tensile property and microstructure assessment of hydrogen treated Ti-6Al-4V alloy

V.N. Vilane, R.D. Knutsen, J.E. Westraadt

Publisher page

Abstract

Temporary hydrogen alloying (THA) treatment was used to refine the coarse-grained microstructure of a Ti-6Al-4V alloy with the intention of modifying tensile strength and ductility. Microstructure evolution was characterised using X-ray diffraction (XRD), electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). The results indicate that THA treatment does not refine the coarse network of prior beta grains, but it alters the coarse Widmanstätten microstructure by nucleating submicron beta grains within the individual lamellae. The modified microstructure increases ultimate tensile strength (UTS) in the order of 100 MPa. The dehydrogenation temperature affected tensile ductility. The lowest dehydrogenation temperature (675 °C) had the highest ductility loss, and increasing the dehydrogenation temperature recovered ductility until full ductility was recovered at 750 °C. The ductility loss was attributed to the embrittling effect of the hydrogen induced phase Ti 3Al which remains in the microstructure even after hydrogen removal and only completely dissolves at 750 °C. The results demonstrate that THA treatment significantly alters the initial coarse-grained microstructure with concomitant improvement in strength, but that the promotion of Ti 3 Al precipitation can cause embrittlement unless the dehydrogenation treatment is controlled to optimise Ti 3Al dissolution.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Hydrogen as a temporary alloying element in titanium alloys: thermohydrogen processing10.1179/095066004225010550 ↗
2. Grain-refinement mechanisms in titanium alloys10.1557/JMR.2008.0002 ↗
3. Kinetics of martensite decomposition in Ti-6Al-4V-xH alloys10.1016/S0921-5093(03)00350-2 ↗
4. Phase transformations in Ti-6Al-4V-xH alloys10.1007/s11661-001-0035-8 ↗
5. Phase transformations in the Ti-6Al-4V-H system
6. Mezzoscopic grain refinement and improved mechanical properties of titanium materials by hydrogen treatments10.1016/S0360-3199(96)00165-6 ↗
7. Tensile and impact properties of mesoscopic-grained α+ β-type titanium alloys obtained through hydrogen treatments10.1016/S0925-8388(99)00370-9 ↗
8. Ultra-fine equiaxed grain refinement and improvement of mechanical properties of α+ β type titanium alloys by hydrogenation, hot working, heat treatment and dehydrogenation10.2320/matertrans1989.35.266 ↗
9. Ultra-fine grain refinement and tensile properties of titanium alloys obtained through protium treatment10.1016/S0925-8388(01)01528-6 ↗
10. Ultra-fine-grain refinement and superplasticity of titanium alloys obtained through protium treatment10.1016/S0360-3199(01)00157-4 ↗
11. Grain refinement in cast Ti-6Al-4V by hydrogenation, deformation and recrystallisation10.4028/www.scientific.net/MSF.753.271 ↗
12. Submicron grain formation in thermohydrogenated and deformed Ti-6Al-4V: the effect of processing route on the degree of grain refinement10.4028/www.scientific.net/AMR.1019.266 ↗
13. Vilane · 2019
14. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
15. The effect of hydrogen as a temporary alloying element on the microstructure and tensile properties of Ti-6Al-4V10.1007/BF02811677 ↗
16. Hydrogen as an alloying element in titanium (hydrovac)
17. Manipulation of microstructure and mechanical properties during dehydrogenation of hydrogen-sintered Ti–6Al–4V10.1016/j.msea.2019.138244 ↗
18. Tensile and fatigue strength of hydrogen-treated Ti-6Al-4V alloy10.1007/BF00576523 ↗
19. Strengthening of Ti-6Al-4V alloys by thermohydrogen processing10.1016/j.ijhydene.2008.11.108 ↗
20. The effect of thermal hydrogenation processing on the Nano-size grain refinement, mechanical property and corrosion resistance of Ti-6Al-4V alloy10.1149/07527.0103ecst ↗
21. Effects of hydrogen loading and type of titanium hydride on grain refinement and mechanical properties of Ti-6Al-4V10.1016/j.jallcom.2014.02.171 ↗
22. Variation of structure and mechanical properties of Ti-6Al-4V with isothermal hydrogenation treatment10.1016/j.actamat.2008.10.026 ↗
23. Microstructure and tensile properties after thermohydrogen processing of Ti-6Al-4V10.1016/j.jmbbm.2008.06.002 ↗
24. An experimental study of the (Ti-6Al-4V)-xH phase diagram using in situ synchrotron XRD and TGA/DSC techniques10.1016/j.actamat.2014.10.045 ↗
25. Embrittlement in Ti-6Al-4V due to hydrogen induced aluminium enrichment
26. Hydrogenation characteristics of Ti-6Al-4V cast alloy and its microstructural modification by hydrogen treatment10.1016/S0360-3199(96)00167-X ↗
27. Phase composition and microstructure of Ti-6Al-4V alloy after hydrogen-plastic working
28. An overview of monolithic titanium aluminides based on Ti3Al and TiAl10.1016/S0254-0584(01)00328-5 ↗
29. Standard test methods for tension testing of metallic materials
30. Standard specification for wrought titanium-6aluminum-4vanadium alloy for surgical implant applications (UNS R56400)
31. Standard specification for titanium-6aluminum-4vanadium alloy castings for surgical implants (UNS R56406)
32. Effect of hydrogen on fracture and inert-environment sustained load cracking resistance of α-β titanium alloys10.1007/BF02644024 ↗
33. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
34. Identifying challenges to the commercial viability of direct powder rolled titanium: a systematic review and market analysis10.3390/ma13092124 ↗
35. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys10.1179/1743290114Y.0000000108 ↗
36. Lattice variations of Ti-6Al-4V alloy with hydrogen content10.1016/j.matchar.2011.04.019 ↗
37. Phase and structure transformations in titanium alloys under thermohydrogenous treatment
38. Control of the structure of titanium alloys by the method of thermohydrogen treatment10.1007/s11003-008-9088-9 ↗
39. Phase transformations and formation of ultra-fine microstructure during hydrogen sintering and phase transformation (HSPT) processing of Ti-6Al-4V10.1007/s11661-015-3141-8 ↗
40. Microstructure of Ti-6Al-4V processed by hydrogenation10.1016/j.scriptamat.2006.08.010 ↗
41. A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility10.1016/j.actamat.2014.01.015 ↗
42. Deformation characteristics of age hardened Ti-6Al-4V10.1007/BF02677278 ↗
43. γ-Titanium Aluminide Alloys: Alloy design and properties
44. Strategies for improving ductility of ordered intermetallics10.1016/j.pnsc.2016.01.014 ↗