journal article·2019-01

Effect of freeze speed on the microstructure and damage-tolerance behavior of bio-inspired ZL205A/silicon carbide composites

Alateng Shaga, Ping Shen, Li-Guang Xiao, Ya-Bing Liu

Publisher page

Abstract

Abstract In the present research, we produced porous silicon carbide (SiC) scaffolds with lamellar and uniformly distributed structures by unidirectional and quick freeze casting, respectively. Subsequently, we prepared the ZL205A/SiC composites with lamellar and uniformly distributed structures by infiltrating a molten ZL205A alloy into the porous SiC scaffolds. The influence of freezing speed on the damage-tolerance behavior and the toughening mechanism of the resultant composites were investigated. We found that because of multiple toughening mechanisms, the layered composites exhibited much higher strength and toughness as compared with the uniformly distributed composites. The lamellar composites manifested superior specific modulus and a unique combination of specific strength and toughness, which was comparable to those of titanium and magnesium alloys. We also observed that the thicknesses of alloy layers and SiC lamellae of the composites reduced with decreasing cooling temperature in freeze casting. Furthermore, the refinement of lamellae size at higher freezing speeds caused a decrease in the damage-tolerance ability of the composites because of weak toughening effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Advanced ceramic materials synthesis · Calcium Carbonate Crystallization and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. Tensile properties of particulate-reinforced metal matrix composites10.1016/1359-835X(96)00040-1 ↗
3. The effects of Cr particles addition on the aging behavior and mechanical properties of SiC p/7075Al composites10.1016/j.matchar.2017.12.030 ↗
4. On the fracture toughness of advanced materials10.1002/adma.200803322 ↗
5. An experimental investigation of deformation and fracture of nacre–mother of pearl10.1007/s11340-007-9040-1 ↗
6. Bioinspired structural materials10.1038/nmat4089 ↗
7. Freezing as a path to build complex composites10.1126/science.1120937 ↗
8. A novel biomimetic approach to the design of high-performance ceramic–metal composites, J10.1098/rsif.2009.0331 ↗
9. Lamellar-interpenetrated Al–Si–Mg/SiC composites fabricated by freeze casting and pressureless infiltration10.1016/j.msea.2015.02.012 ↗
10. Processing and mechanical properties of lamellar-structured Al–7Si–5Cu/TiC composites10.1016/j.matdes.2016.06.008 ↗
11. Developing high toughness and strength Al/TiC composites using ice-templating and pressure infiltration10.1016/j.ceramint.2016.12.038 ↗
12. Fabrication of a new SiC/2024Al co-continuous composite with lamellar microstructure and high mechanical properties10.1016/j.jallcom.2013.09.140 ↗
13. High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure10.1016/j.msea.2017.09.114 ↗
14. Freeze-casting of porous ceramics: a review of current achievements and issues10.1002/adem.200700270 ↗
15. Investigation of structure formation during freeze-casting from very slow to very fast solidification velocities10.1016/j.actamat.2011.04.046 ↗
16. On the development of ice-templated silicon carbide scaffolds for nature-inspired structural materials10.1016/j.actamat.2013.08.006 ↗
17. Methodology to design the interfaces in SiC/Al composites10.1007/s11661-001-0241-4 ↗
18. Development of high-strength reaction-sintered silicon carbide10.1016/S0925-9635(03)00066-9 ↗
19. Strong, tough and stiff bioinspired ceramics from brittle constituents10.1038/nmat3915 ↗
20. The mechanical efficiency of natural materials10.1080/14786430410001680935 ↗
21. Ashby · 1992
22. The conflicts between strength and toughness10.1038/nmat3115 ↗
23. Towards high-performance bioinspired composites10.1002/adma.201201471 ↗
24. Mass production of bulk artificial nacre with excellent mechanical properties
25. In situ toughened silicon carbide with Al-B-C additions10.1111/j.1151-2916.1996.tb08145.x ↗
26. Mechanical behaviour of laminated metal composites10.1179/imr.1996.41.5.169 ↗
27. A simple way to make tough ceramics10.1038/347455a0 ↗
28. A mechanism for the control of crack propagation in all-brittle systems10.1098/rspa.1964.0248 ↗
29. The role of metal plasticity and interfacial strength in the cracking of metal/ceramic laminates10.1016/0956-7151(94)00341-E ↗
30. Multiple cracking in metal-ceramic laminates10.1016/0020-7683(94)90067-1 ↗
31. Fracture of metal/ceramic laminates-I. Transition from single to multiple cracking10.1016/S1359-6454(98)00357-7 ↗