journal article·2022-02

Effect of Si element and YF3 addition on microstructure and phase transformation of NiTi alloy coatings

Wennan Su, Xiufang Cui, Guo Jin, Yajie Guan, Yao Zhao, Simin Wan, Changhao Liu, Yuyun Yang, Haoliang Tian

Publisher page

Abstract

NiTi, NiTi-4Si, and NiTi-4Si-2YF 3 coatings were prepared on Ti-6Al-4V substrate by laser cladding to obtain composite multilayer protective coating for composite structure. The effects of Si and YF 3 addition on the microstructure, phase composition, microhardness, and phase transformation of the coatings were systematically analyzed. The coatings are mainly composed of NiTi, NiTi 2, and TiN phases. The addition of YF 3 results in the decrease of the dendrite TiN phase in the coating. TEM results show that the core-shell structure is observed in NiTi-4Si coating. The β-Ti phase was surrounded by the shell NiTi 2 phase. After the addition of YF 3 , the core-shell structure was found to disappear. With the addition of the Si element, the eutectic structure was found in the coatings. The eutectic structure is mainly composed of NiTi (B2) and Ti 2 Si phases. According to the SEAD result, there are crystallographic orientation relationships (ORs) between NiTi (B2) phase and Ti 2Si phase as follows: 1 ¯ 11 B 2 / / 1 ¯ 23 Ti 2 Si . The average microhardness of the NiTi, NiTi-4Si and NiTi-4Si-2YF 3 coatings were at 468.33 HV 0.5, 499.86 HV 0.5, and 433.65 HV 0.5, respectively. At the same time, the uniformity of the NiTi phase in NiTi-4Si-2YF 3 coatings is improved, which is conducive to a more complete phase transition.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Superelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIr10.1016/j.mtla.2021.101090 ↗
2. Martensite twin formation and mechanical properties of B2 austenite NiTi shape memory alloy undergoing severe plastic deformation and subsequent annealing10.1016/j.matchar.2021.111273 ↗
3. Controlling martensitic transformation characteristics in defect-free NiTi shape memory alloys fabricated using laser powder bed fusion and a process optimization framework10.1016/j.actamat.2021.117017 ↗
4. Reducing functional fatigue, transition stress and hysteresis of NiTi micropillars by one-step overstressed plastic deformation10.1016/j.scriptamat.2021.113958 ↗
5. Influence of Ni4Ti3 precipitate on pseudoelasticity of austenitic NiTi shape memory alloys deformed at high strain rate10.1016/j.msea.2021.140753 ↗
6. Corrosion behavior, antibacterial ability, and osteogenic activity of Zn-incorporated Ni-Ti-O nanopore layers on NiTi alloy10.1016/j.jmst.2021.04.029 ↗
7. Deposition of superelastic composite NiTi based films10.1016/j.vacuum.2013.12.010 ↗
8. Corrosion performance of HVOF and APS thermally sprayed NiTi intermetallic coatings in 3.5% NaCl solution10.1016/j.corsci.2009.11.034 ↗
9. Effect of Si content on microstructure and tribological properties of Ti5Si3/TiC reinforced NiTi laser cladding coatings10.1016/j.surfcoat.2021.127281 ↗
10. Fabrication of in-situ Ni/Ni3Ti-NiTi-Fe2Ti-βCr2Ti reinforced Ti-based composite coating using tungsten inert gas processing10.1016/j.jallcom.2021.159697 ↗
11. Study on properties of SLM-NiTi shape memory alloy under the same energy density10.1016/j.jmrt.2021.04.058 ↗
12. Laser cladding of vanadium carbide interlayer for CVD diamond growth on steel substrate10.1016/j.surfcoat.2021.127387 ↗
13. Effect of Ni modified graphene on microstructure and properties of Ni60 composite coatings prepared by laser cladding10.1016/j.optlastec.2020.106756 ↗
14. Corrosion, wear and biocompatibility of hydroxyapatite bio-functionally graded coating on titanium alloy surface prepared by laser cladding10.1016/j.ceramint.2021.05.186 ↗
15. Nanoindentation and corrosion studies of TiN/NiTi thin films for biomedical applications10.1016/j.surfcoat.2009.06.002 ↗
16. Investigation of the self-healing sliding wear characteristics of NiTi-based PVD coatings on tool steel10.1016/j.wear.2016.08.004 ↗
17. Microstructural characterization and enhanced hardness of nanostructured Ni3Ti-NiTi (B2) intermetallic alloy produced by mechanical alloying and fast microwave-assisted sintering process10.1016/j.intermet.2021.107119 ↗
18. Structure of martensite in sputter-deposited Ti–Ni thin films containing Guinier–Preston zones10.1016/S1359-6454(01)00204-X ↗
19. The effect of Si and B on formability and wear resistance of preset-powder laser cladding W10V5Co4 alloy steel coating10.1016/j.optlastec.2020.106590 ↗
20. Effect of Si addition on microstructure and wear behavior of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding10.1016/j.surfcoat.2020.126522 ↗
21. Evolution in microstructure and high-temperature oxidation behaviors of the laser-cladding coatings with the Si addition contents10.1016/j.jallcom.2020.154131 ↗
22. Effect of Si addition on martensitic transformation and microstructure of NiTiSi shape memory alloys10.1007/s11661-020-05883-1 ↗
23. Effects of rare earth modifying inclusions on the pitting corrosion of 13Cr4Ni martensitic stainless steel10.1016/j.jmst.2021.03.014 ↗
24. Nucleation and strengthening mechanism of laser cladding aluminum alloy by Ni-Cr-B-Si alloy powder based on rare earth control10.1016/j.jmatprotec.2021.117145 ↗
25. Effect of rare earth elements on coatings developed by thermal spraying processes (TSP) – a brief review
26. Promoting the heterogeneous nucleation and the functional properties of directed energy deposited NiTi alloy by addition of La2O3
27. Microstructure and wear resistance of laser cladded Ni-Cr-co-Ti-V high-entropy alloy coating after laser remelting processing10.1016/j.optlastec.2017.09.012 ↗
28. In-situ Ti(C, N) reinforced AlCoCrFeNiSi-based high entropy alloy coating with functional gradient double-layer structure fabricated by laser cladding10.1016/j.jallcom.2021.161252 ↗
29. Van Humbeeck, on the transformation behavior of NiTi shape-memory alloy produced by SLM, Shap10.1007/s40830-016-0083-y ↗
30. Ni-based alloy/submicron WS2 self-lubricating composite coating synthesized by Nd:YAG laser cladding10.1016/j.msea.2007.04.087 ↗
31. Investigation on laser cladding high-hardness nano-ceramic coating assisted by ultrasonic vibration processing10.1016/j.ijleo.2016.01.194 ↗
32. Microstructure and wear behavior of γ/Al4C3/TiC/CaF2 composite coating on γ-TiAl intermetallic alloy prepared by Nd:YAG laser cladding10.1016/j.apsusc.2008.11.023 ↗
33. Microstructure and tribological properties of laser-clad Ni–Cr/TiB2 composite coatings on copper with the addition of CaF210.1016/j.surfcoat.2012.03.086 ↗
34. Influence of CaF2 on microstructural characteristics and mechanical properties of 304 stainless steel underwater wet welding using flux-cored wire10.1016/j.jmapro.2019.07.003 ↗
35. Temperature field based closed-loop control of laser hot wire cladding for low dilution10.1016/j.procir.2020.09.163 ↗
36. Thermodynamic study of the low-temperature phase B19′ and the martensitic transformation in near-equiatomic Ti-Ni shape memory alloys10.1007/s11661-997-0041-6 ↗
37. TEM observation on phase separation and interfaces of laser surface alloyed high-entropy alloy coating10.1016/j.micron.2017.10.001 ↗
38. Interfacial study of NiTi–Ti3SiC2 solid state diffusion bonded joints10.1016/j.msea.2014.10.033 ↗
39. Correlating microstructure and superelasticity of directed energy deposition additive manufactured Ni-rich NiTi alloys10.1016/j.jallcom.2017.12.270 ↗
40. Microstructure and properties of LENS (laser engineered net shaping) manufactured Ni-Ti shape memory alloy10.1016/j.jallcom.2018.03.400 ↗
41. The development of TiNi-based negative Poisson's ratio structure using selective laser melting10.1016/j.actamat.2015.12.017 ↗
42. Cutting speed dependent microstructure and transformation behavior of NiTi alloy in dry and cryogenic machining10.1007/s11665-014-1247-6 ↗
43. Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing10.1016/j.matdes.2021.109690 ↗