Stress evolution in plastically deformed austenitic and ferritic steels determined using angle- and energy-dispersive diffraction
Source abstract
Abstract
In the presented research, the intergranular elastic interaction and the second-order plastic incompatibility stress in textured ferritic and austenitic steels were investigated by means of diffraction. The lattice strains were measured inside the samples by the multiple reflection method using high energy X-rays diffraction during uniaxial in situ tensile tests. Comparing experiment with various models of intergranular interaction, it was found that the Eshelby-Kröner model correctly approximates the X-ray stress factors (XSFs) for different reflections hkl and scattering vector orientations. The verified XSFs were used to investigate the evolution of the first and second-order stresses in both austenitic and ferritic steels. It was shown that considering only the elastic anisotropy, the non-linearity of sin2ψ plots cannot be explained by crystallographic texture. Therefore, a more advanced method based on elastic-plastic self-consistent modeling (EPSC) is required for the analysis. Using such methodology the non-linearities of cos2φ plots were explained, and the evolutions of the first and second-order stresses were determined. It was found that plastic deformation of about 1–2% can completely exchange the state of second-order plastic incompatibility stresses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Zur zweckmäßigen Definition von Eigenspannungen10.1515/htm-1973-280305 ↗
2. Evolution of phase stresses in Al/SiCp composite during thermal cycling and compression test studied using diffraction and self-consistent models10.1016/j.jmst.2019.03.046 ↗
3. Direct determination of phase stress evolution in duplex steel using synchrotron diffraction10.1016/j.msea.2020.140355 ↗
4. Intergranular thermal stresses in zirconium — effects on X-rays macrostress measurements10.1016/0022-3115(95)00205-7 ↗
5. X-ray measurement of residual stresses and texture development during a rolling sequence of zirconium alloy cladding tubes – influence of plastic anisotropy on mechanical behaviour10.1107/S0021889810019989 ↗
6. In situ neutron measurements and modelling of the intergranular strains in the near-β titanium alloy Ti-β21S10.1016/j.actamat.2016.02.065 ↗
7. Lattice strain development in an alpha titanium alloy studied using synchrotron and neutron diffraction10.1016/j.msea.2021.141489 ↗
8. Examination of the residual stress field in plastically deformed polycrystalline material
9. Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steel10.1107/S0021889808023911 ↗
10. Direct measurement of critical resolved shear stress of prismatic and basal slip in polycrystalline Ti using high energy X-ray diffraction microscopy10.1016/j.actamat.2017.05.015 ↗
11. Poulsen · 2004
12. Tracking: a method for structural characterization of grains in powders or polycrystals10.1107/S0021889801014170 ↗
13. Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders10.1107/S0021889801014273 ↗
14. An introduction to three-dimensional X-ray diffraction microscopy10.1107/S0021889812039143 ↗
15. Strain tensor development in a single grain in the bulk of a polycrystal under loading10.1016/S1359-6454(02)00028-9 ↗
16. Simultaneous measurement of the strain tensor of 10 individual grains embedded in an Al tensile sample10.1016/j.msea.2004.02.069 ↗
17. Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction10.1107/S0021889810012963 ↗
18. Direct diffraction measurement of critical resolved shear stresses and stress localisation in magnesium alloy10.1016/j.msea.2020.140400 ↗
19. Noyan · 1987
20. Evaluation of macro- and Micro-residual stresses on Textdeed materials by X-ray, neutron diffraction and defection measurements
21. Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction10.1107/S0021889804029516 ↗
22. Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle10.1002/zamm.19290090104 ↗
23. Voigt · Lehrbuch der Kristallphysik · 1928
24. Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls10.1007/BF01337948 ↗
25. The determination of the elastic field of an ellipsoidal inclusion, and related problems
26. Eshelby-Kröner self-consistent elastic model: the geometric mean versus the arithmetic mean - a numerical investigation10.1002/zamm.201100135 ↗
27. Diffraction elastic constants for textured materials — different methods of calculation10.1002/crat.2170280217 ↗
28. A novel approach for nondestructive depth-resolved analysis of residual stress and grain interaction in the near-surface zone applied to an austenitic stainless steel sample subjected to mechanical polishing10.1016/j.measurement.2022.111016 ↗
29. Problem of elastic anisotropy and stacking faults in stress analysis using multireflection grazing-incidence X-ray diffraction10.1107/S1600576715002666 ↗
30. Hauk · 1997
31. Evolution of microstructure and residual stress during annealing of austenitic and ferritic steels10.1016/j.matchar.2015.12.019 ↗
32. Stress localisation in lamellar cementite and ferrite during elastoplastic deformation of pearlitic steel studied using diffraction and modelling10.1016/j.ijplas.2019.102651 ↗
33. The role of basal slip in the generation of intergranular stresses in magnesium alloy studied using X-ray diffraction and modelling10.1016/j.matdes.2021.109543 ↗
34. Neutron diffraction study of the residual stress state of a cold-rolled steel strip10.1016/0025-5416(87)90151-0 ↗
35. Residual lattice strains in plastically deformed poly-crystalline metal aggregates
36. The need for experimentally determined X-ray elastic constants*
37. A study of residual stresses in Zircaloy-2 with rod texture10.1016/0956-7151(94)90191-0 ↗
38. Lattice strain evolution during uniaxial tensile loading of stainless steel10.1016/S0921-5093(98)00878-8 ↗
39. Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling10.1016/j.actamat.2007.10.040 ↗
40. Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction10.1016/j.ijplas.2010.03.005 ↗
41. Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model10.1016/j.ijplas.2016.01.018 ↗
42. Measured and predicted intergranular strains in textured austenitic steel10.1016/S1359-6454(99)00354-7 ↗
43. Diffraction elastic constants for the determination of stresses in textured cubic materials: an experimental test10.1080/01418618808209942 ↗
44. Elastoplasticity of micro-inhomogeneous metals at large strains10.1016/0749-6419(89)90027-2 ↗
45. Elastoplastic properties of duplex steel determined using neutron diffraction and self-consistent model10.1016/j.actamat.2003.10.046 ↗
46. Measurement and prediction of residual stresses and crystallographic texture development in rolled Zircaloy-4 plates: X-ray diffraction and the self-consistent model10.1016/j.actamat.2007.04.007 ↗
47. Residual stress fields analysis in rolled Zircaloy-4 plates: grazing incidence diffraction and elastoplastic self-consistent model10.1016/j.actamat.2014.02.031 ↗
48. Simmons · 1971
49. Operational texture analysis10.1016/0921-5093(91)90355-Q ↗
50. Bunge · 1982
51. Evaluation of the role of deformation twinning in work hardening behavior of face-centered-cubic polycrystals10.1007/s11661-007-9356-6 ↗
52. Twinning and martensitic transformations in nickel-enriched 304 austenitic steel during tensile and indentation deformations10.1016/j.msea.2013.08.072 ↗
53. In-situ observation on twin boundary evolution and crack initiation behavior during tensile test on 316L austenitic stainless steel10.1016/j.matchar.2017.08.020 ↗
54. The materials science synchrotron beamline EDDI for energy-dispersive diffraction analysis10.1016/j.nima.2007.05.209 ↗
55. The 7T-MPW-EDDI beamline at BESSY II10.17815/jlsrf-2-63 ↗
56. Two-dimensional detector software: from real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
57. Multifit/Polydefix: a framework for the analysis of polycrystal deformation using X-rays10.1107/S1600576715010390 ↗