In-situ synchrotron high energy X-ray diffraction study on the internal strain evolution of an extruded Ti-45Al-8Nb-0.2C alloy during high-temperature compression
Source abstract
Abstract
Due to their exceptional properties, γ-TiAl based alloys present substantial prospect for aerospace and automotiveapplications. However, the significant disparity in plasticity between the D019-α2 and L10-γ phases greatlyaffects TiAl alloys’ service behavior. This study investigates the internal strain accumulation in the α2 and γphases of an extruded Ti-45Al-8Nb-0.2C alloy during compression at 900 ◦C and the subsequent stress relaxationbehavior during annealing at 850 ◦C, using in situ synchrotron high-energy X-ray diffraction (HEXRD). Duringcompression, the γ phase starts to yield plastically at approximately 410 MPa true stress, progressively shiftingthe load to the α2 phase and generating high residual stress in the α2 phase after deformation. However,annealing at 850 ◦C for 30 min only partially relieves the residual stress in the α2 phase, with the relaxation ratedecreasing substantially after the first 10 min. Furthermore, when the true stress reaches 790 MPa duringcompression, the α2 phase undergoes rigid-body rotation to accommodate the plastic deformation of the adjacentγ phase, initiating texture evolution that ultimately forms a distinct < 1120 > fiber texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
2. Development of gamma titanium aluminide (γ-TiAl) alloys: a review10.1016/j.jallcom.2022.167262 ↗
3. Gamma titanium aluminide alloys - an assessment within the competition of aerospace structural materials10.1016/S0921-5093(98)01158-7 ↗
4. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
5. A review of microstructure control and mechanical performance optimization of γ-TiAl alloys10.1016/j.jallcom.2022.167611 ↗
6. Microstructure and deformation of two-phase γ-titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
7. Orientation and temperature dependence of yield stress and slip geometry of Ti3Al and Ti3Al-V single crystals10.1016/0956-7151(93)90162-L ↗
8. Plastic deformation of single crystals of Ti3Al with D019 structure10.1080/01418619108213939 ↗
9. Plastic deformation of single crystals of a D019 compound with an off-stoichiometric composition (Ti-36.5 at.% Al) at room temperature10.1080/01418619308225357 ↗
10. The internal stress state in lamellar PST-crystals of the intermetallic alloy TiAl after compressive deformation10.1016/S0966-9795(98)00122-8 ↗
11. In-situ synchrotron high energy X-ray diffraction study on the compressive creep behavior of an extruded Ti-45Al-8Nb-0.2C alloy10.1016/j.intermet.2024.108518 ↗
12. The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys10.1016/j.msea.2017.10.010 ↗
13. Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy10.1016/j.actamat.2018.07.062 ↗
14. In-situ synchrotron high energy X-ray diffraction study on the internal strain evolution of D019-α2 phase during high-temperature compression and subsequent annealing in a TiAl alloy10.1016/j.jmst.2023.04.027 ↗
15. Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue10.1016/j.actamat.2017.12.040 ↗
16. Effect of internal stresses on the fracture toughness of a TiAl-based alloy with duplex microstructures10.1016/S1359-6454(03)00392-6 ↗
17. Experimental investigation on the fatigue life of Ti-6Al-4V treated by vibratory stress relief10.3390/met7050158 ↗
18. Texture evolution of the γ- and the α/α2-phase during hot rolling of γ-TiAl based alloys10.1016/j.intermet.2005.07.002 ↗
19. Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy10.1016/j.actamat.2016.12.056 ↗
20. Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing10.1002/adem.201300265 ↗
21. Effect of texture on mechanical anisotropy of Ti–47Al–2Cr-0.2Mo intermetallics10.1016/j.intermet.2022.107742 ↗
22. Textures of rectangular extrusions and their effects on the mechanical properties of thermo-mechanically treated, lamellar microstructure, Ti–47Al–2Cr–2Nb–0.15B10.1016/j.intermet.2014.03.016 ↗
23. Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel10.1016/j.actamat.2006.11.004 ↗
24. In situ high-energy X-ray diffraction during hot-forming of a multiphase TiAl alloy10.3390/met5042252 ↗
25. Recrystallization and phase transitions in a γ-TiAl-based alloy as observed by ex situ and in situ high-energy X-ray diffraction10.1016/j.actamat.2006.04.004 ↗
26. Thermo-mechanical processing in a synchrotron beam10.1016/j.msea.2010.06.017 ↗
27. Hot deformation and softening response in boronmodified two-phase titanium aluminide Ti–48Al–2V–0.2B10.1557/s43578-020-00079-0 ↗
28. Appel · 2011
29. Temperature dependence of micro-deformation behavior of the porous tungsten/Zr-based metallic glass composite10.1016/j.jnoncrysol.2016.01.005 ↗
30. An assessment of the contributing factors to the superior properties of a nanostructured steel using in situ high-energy X-ray diffraction10.1016/j.actamat.2009.12.028 ↗
31. Dieter · 1986
32. Intergranular and interphase microstresses10.1016/S1359-0286(00)00019-X ↗
33. Effect of initial microstructure on the micromechanical behavior of Ti-55531 titanium alloy investigated by in-situ high-energy X-ray diffraction10.1016/j.msea.2019.138806 ↗
34. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
35. Load partition and microstructural evolution during in situ hot deformation of Ti-6Al-6V-2Sn alloys10.1016/j.msea.2016.01.059 ↗
36. Deformation-induced internal stresses in multiphase titanium aluminide alloys10.1016/j.actamat.2013.10.024 ↗
37. Vöhringer · 1987
38. Formation mechanism of γ twins in β-solidified γ-TiAl alloys10.1016/j.jmst.2021.04.080 ↗
39. Phase transformation mechanisms in a quenched Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y alloy after subsequent annealing at 800 °C10.1016/j.jallcom.2016.08.238 ↗
40. Microstructure and phase transformations of ωo-Ti4Al3Nb based alloys after quenching and subsequent aging at intermediate temperatures10.1016/j.jallcom.2019.153387 ↗
41. Synchrotron texture analysis with area detectors10.1107/S0021889803010136 ↗
42. In-situ synchrotron high energy X-ray diffraction study on the deformation mechanisms of D019-α2 phase during high-temperature compression in a TiAl alloy10.1016/j.jmrt.2024.10.231 ↗
43. Deformation behavior and dynamic recrystallization mechanism of a novel high Nb containing TiAl alloy in (α + γ) dual-phase field10.1016/j.jallcom.2023.169250 ↗
44. Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing10.1002/adem.201300265 ↗