A study on microstructure evolution and mechanical properties of PVD TiAlN/TiAlCrSiN deposited on Re doped Ti(C,N)-based cermets
Source abstract
Abstract
Re doped TiCN-based cermet substrates were prepared and coated with bilayer TiAlN/TiAlCrSiN to investigate the influencing mechanism of Re on structural evolution and mechanical performance of substrates and coatings. The results showed the grain size of hard phase particles decreased with the increase of Re content. The existence form of Re in cermets was characterized by high resolution transmission electron microscope (HRTEM) and energy spectrum analysis (EDS). Conclusions could be drawn that Re existed in solid solution and free state. Meanwhile, fcc-Co expanded to form hcp-Co structure, and twins was detected. According the generalized stacking fault energy (GSFE) curves calculated by first principles, it showed that the dissolution of Re into Co reduced the stable SFE γ sf, unstable twinning SFE γ ut and twinning SFE γ tsf of fcc Co, promoting the formation of hcp-Co and twins. Cermets containing 0 wt% Re exhibited the strong preferred textures of {001}. However, the preferred orientation was obviously weakened in cermets containing 5 wt% Re, which indicated Re added into ceramic metals could restrain the preferred growth of {001} textures. The nanoindentation curves showed coatings on substrates with 5 wt% Re had the highest nanohardness value of 31.258GPa, which attributed to Re diffusion into TiAlCrSiN/TiAlN and refinement of core-rim grains. However, it was found that coatings on cermets with 5 wt% Re showed the lowest bonding strength due to the huge lattice structural difference between fcc-TiAlCrSiN and hcp-co substrate. In conclusion, bilayer TiAlCrSiN/TiAlN coatings deposited on TiCN-based cermets with 3 wt% Re possessed the best comprehensive performance, combining the various factors such as nanohardness, surface roughness, bonding strength and wear resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes10.1016/j.jallcom.2017.10.274 ↗
2. Kinetics of high-temperature oxidation of (Ti,Ta)(C,N)-based cermets10.1016/j.corsci.2015.10.006 ↗
3. Synthesis and mechanical properties of TiCx and Ti(C,N) reinforced Titanium matrix in situ composites by reactive spark plasma sintering10.1016/j.msea.2019.05.021 ↗
4. Growth and properties of multi-layer nano CrAlN/TiAlN composite coating on the cermets with CrFeCoNiMo, CrFeCoNiMn, CrFeCoNiAl high entropy alloy phase10.1016/j.apsusc.2021.151309 ↗
5. High entropy alloys: substituting for cobalt in cutting edge technology10.1016/j.apmt.2018.07.001 ↗
6. Sliding wear characteristics of WC-VC-co alloys with various Ru additions10.1016/j.ijrmhm.2020.105429 ↗
7. Tribocorrosion behavior of HVOF sprayed WC-based cermet coatings in sodium chloride solution environment in relation to binder phases10.1016/j.surfcoat.2022.128248 ↗
8. Cavitation erosion resistance in NaCl medium of HVOF sprayed WC-based cermet coatings at various flow velocities: A comparative study on the effect of Ni and CoCr binder phases10.1016/j.ijrmhm.2020.105407 ↗
9. Corrosion behavior of thermal sprayed WC cermet coatings having various metallic binders in strong acidic environment10.1016/j.surfcoat.2004.10.142 ↗
10. Cermet composite coating with a ductile Ni3Al binder phase and an in-situ Cr7C3 augmented phase10.1016/j.intermet.2021.107300 ↗
11. Influence of binder materials on the properties of low power plasma sprayed cermet coatings10.1016/j.surfcoat.2005.02.159 ↗
12. First-principles calculations of generalized-stacking-fault-energy of Co-based alloys10.1016/j.commatsci.2016.04.031 ↗
13. Effect of secondary carbides addition on the microstructure and mechanical properties of (Ti, W, Mo, V)(C, N)-based cermets10.1016/j.ijrmhm.2011.03.013 ↗
14. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
15. Structure of a binding phase in re-alloyed WC·Co cemented carbides10.1016/0263-4368(91)90009-D ↗
16. Deformation twinning feature and its effects on significant enhancement of tensile ductility in columnar-grained Fe–6.5wt.%Si alloy at intermediate temperatures10.1016/j.intermet.2011.12.011 ↗
17. Intrinsic stacking faults in body-centred cubic crystals10.1080/14786436808227500 ↗
18. A first principles study of the stacking fault energies for fcc co-based binary alloys10.1016/j.actamat.2017.07.010 ↗
19. Dislocation nucleation from a crack tip: an analysis based on the Peierls concept10.1016/S0022-5096(05)80012-2 ↗
20. Strengthening mechanism of cemented carbide containing Re10.1016/j.msea.2022.142803 ↗
21. D A Y · 1991
22. Toughening cemented carbides by phase transformation of zirconia
23. Effect of TiC addition and Co binder content in cemented carbide substrates on the microstructure and mechanical properties of the TiAlN-based composite films10.1016/j.vacuum.2020.109787 ↗
24. Enhanced hardness and age-hardening of TiAlN coatings through Ru-addition10.1016/j.scriptamat.2018.11.051 ↗
25. The microstructure and mechanical properties evaluation of CrTiAlSiN coatings: effects of silicon content10.1016/j.tsf.2017.07.058 ↗
26. Ti1−xAlxN coatings by reactive high power impulse magnetron sputtering: film/substrate interface effect on residual stress and high temperature oxidation10.1016/j.surfcoat.2018.09.004 ↗
27. Structural characterizations of magnetronsputtered nanocrystalline TiN thin films10.1016/j.matchar.2007.08.017 ↗
28. Structure and mechanical behavior evaluation of CVD multilayer coatings deposited on Ti(C,N)-based cermets10.1016/j.ceramint.2022.01.203 ↗
29. Investigation on microstructures and mechanical properties of AlCrN coatings deposited on the surface of plasma nitrocarburized cool-work tool steels10.1016/j.vacuum.2015.08.021 ↗
30. Influence of substrate pre-treatments on residual stresses and tribo-mechanical properties of TiAlN-based PVD coatings10.1016/j.surfcoat.2014.08.075 ↗
31. Influence of bias voltage on the hardness and toughness of CrAlN coatings via magnetron sputtering10.1016/j.surfcoat.2012.06.041 ↗
32. Influence of Ti–TiN multilayer PVD-coatings design on residual stresses and adhesion10.1016/j.matdes.2015.03.007 ↗
33. Structure and high temperature tribological behavior of TiAlN/nitride duplex treated coatings on Ti6Al4V10.1016/j.surfcoat.2016.05.016 ↗