Hot deformation and processing maps of a Fe–Al intermetallic alloy
Source abstract
Abstract
Abstract Iron aluminide alloys are advanced structural materials with promising properties for elevated temperature applications in a hostile environment. They offer a combination of unique properties such as corrosion and wear resistance, high temperature strength, lower density and cost advantage over the Fe–Cr or Fe–Cr–Ni stainless steels. In our work, the deformation behavior of a Fe–16Al–5Cr–1Mo–0.1Zr (at.%) alloy (hereafter known as Fe–16Al) under hot compression conditions was characterized in the temperature range 600–1100 °C and strain rate range 10−3–102 s−1. Processing maps were calculated to evaluate the efficiency of the hot working and to recognize the instability regions of the flow behavior. The isothermal, constant-strain rate compression tests were carried out on a Gleeble 3800 testing system. The flow stress was found to be strongly dependent on temperature and strain rate. At higher strain rates or lower temperatures, the Fe–16Al alloy exhibited a flow-softening type of stress–strain curve, while at lower strain rates or at higher temperatures, the flow curves were of a steady-state type. The tested alloy possesses the optimum hot working condition domain above 750 °C at 10− 1–10−2 s−1 for e = 0.6, since the material undergoes dynamic recrystallization to produce a fine-grained structure (deq ≈ 20–50 μm) with a high fraction of high angle boundaries (~ 40%) and the peak efficiencies (η = 56% at 750 °C and 10−3 s−1). These results have been related to the earlier reported results, achieved for two intermetallic alloys: Fe3Al (Fe–28Al–5Cr–0.08Zr–0.04B at.%) and FeAl (Fe–36Al–0.22Mo–0.05Zr–0.01B at.%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgy and Material Forming · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Development and commercialization status of Fe3Al-base intermetallic alloys
2. Nickel and iron aluminides: an overview on properties, processing and applications10.1016/0966-9795(95)00056-9 ↗
3. Analysis of relationships between cohesive energy, elastic moduli and lattice parameter of some high temperature intermetallics10.1016/0966-9795(95)92678-S ↗
4. Nickel and iron aluminides: an overview on properties, processing and applications10.1016/0966-9795(95)00056-9 ↗
5. Fossil energy applications of intermetallic alloys10.1016/S0966-9795(00)00110-2 ↗
6. Concepts derived from phase diagram studies for the strengthening of Fe–Al-based alloys10.1016/j.intermet.2004.10.015 ↗
7. Review — environmental embrittlement of iron aluminides10.1016/0966-9795(94)90001-9 ↗
8. A review of the flow and fracture of FeAl
9. Effects of deviation from stoichiometry on the deformation behaviour of FeAl at intermediate temperatures10.1016/S0966-9795(98)00104-6 ↗
10. Kupka · 2005
11. High temperature ordered intermetallic alloys V
12. On the effect of the B2 thermomechanical treatment in improving the room temperature ductility of Fe3Al-based alloys10.1016/S0966-9795(01)00007-3 ↗
13. The effect of loading mode changes during the sintering process on the mechanical properties of FeAl intermetallic sinters10.1016/j.intermet.2012.10.003 ↗
14. Processing of iron aluminides10.1016/S0921-5093(98)00937-X ↗
15. Structural Intermetallics
16. Hot workability of as-cast Fe3Al–2.5%Cr intermetallic alloy10.1016/S0921-5093(02)00585-3 ↗
17. Hot deformation behavior of a Fe3Al-binary alloy in the A2 and B2-order regimes10.1016/j.intermet.2004.10.017 ↗
18. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
19. Prasad · 1997
20. Microstructural control in hot working of IN-718 superalloy using processing map10.1007/BF02652327 ↗
21. Validation of processing maps for a 15Cr–15Ni–2.2Mo–0.3Ti austenic stainless steel using hot rolling tests10.1016/S0924-0136(02)00938-X ↗
22. Characterization of mechanism of hot deformation of as-cast nickel aluminide alloy10.1016/S0966-9795(00)00048-0 ↗
23. Optimization process parameters for the manufacturing of rocket casings: a study using processing maps10.1361/105994903322692394 ↗
24. Deformation processing map for control of CuSi4.6 silicon bronze microstructure
25. Characterization of deformation stability in hot forging of conventional Ti–6Al–4V using process maps10.1016/S0924-0136(02)00801-4 ↗
26. Influence of heat treatment on the structure and mechanical properties of Ni3Al-based alloys
27. Effect of recrystallization on room temperature tensile properties of an Fe3Al-based alloy10.1016/0956-716X(93)90449-3 ↗
28. The role of controlled recrystallization treatments on ductility of Fe3Al alloys10.1016/0956-7151(94)90007-8 ↗
29. Yang · Mater. Res. Soc. Symp. Proc. · 1995 · 364 · 12110.1557/PROC-364-121 ↗
30. Hot deformation and processing maps of Fe3Al intermetallic alloy10.1016/j.intermet.2005.12.014 ↗
31. Influence of temperature and strain rate on the microstructure and flow stress of iron aluminides
32. Processing maps for hot working of FeAl-based alloy10.1016/j.intermet.2009.12.026 ↗
33. Łyszkowski · 2008
34. Handbook of Workability and Process Design
35. The influence of microstructure on the ductility of iron aluminides10.1016/S0966-9795(99)00038-2 ↗
36. Błaż · 1998
37. Grabski · 1973
38. Nieh · 1997 · 1
39. Bojar · 2006
40. Superplastic deformation in a coarse-grained Fe3Al based alloy10.1016/S1359-6462(00)00626-6 ↗
41. Iron aluminides: present status and future prospects10.1016/S0921-5093(98)00909-5 ↗
42. The mechanisms of plastic deformation of polycrystalline metals at high temperatures
43. Wyrzykowski · 1993
44. Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior10.1016/S1359-6454(97)00233-4 ↗
45. Mechanisms of strength properties anomaly of Fe–Al sinters by compression tests at elevated temperature
46. Hot working behaviour of extruded powder products of B2 iron aluminide alloys10.1016/S0921-5093(01)00909-1 ↗
47. Processing maps for hot working of a P/M iron aluminide alloy10.1016/S0966-9795(00)00041-8 ↗
48. High-temperature deformation behaviour of Fe3Al10.1016/S0921-5093(98)00940-X ↗