Preparation of TA15 powder reinforced 45CrNiMoY alloy steel with high mechanical property by pre-laid laser cladding technology
Source abstract
Abstract
Abstract Based on the principle of in-situ precipitation strengthening, TA15 powder (Ti-6.5Al-1Mo-1V-1.5Zr) was used as an additive to improve the mechanical properties of 45CrNiMoY alloy steel by pre-laid laser cladding (PLLC) technology. Effects of the content of TA15 powders (0–1.5 wt%) on the microstructure, precipitation mechanism and mechanical property of PLLC 45CrNiMoY alloy steel samples were investigated. Results indicate that TA15 alloy has a significant effect on the microstructure of 45CrNiMoY alloy steel through metallurgical reaction in the laser molten pool. With the increase of TA15 powder content, the granular bainite (GB) microstructure were remarkably refined, the mount of the acicular ferrite (AF) was increased, and in-situ precipitates such as Ti-Y2O3-Zr (TYZ) composite oxide, TiC and ZrC carbide were produced. The 45CrNiMoY alloy steel sample with 1.0 wt% TA15 alloy addition has the best combination of tensile strength (1158 ± 9.7 MPa) and elongation (9.8 ± 0.4%), its microhardness was improved by 25.6% compared with the sample without TA15 powder. The TYZ composite oxides did not only serve as the AF nucleation sites but also spheroidize the detrimental manganese sulfide phase leading to a good elongation of the 45CrNiMoY alloy steel, the TiC and ZrC carbides played a key role in the improvement of the microhardness and tensile strength. The proper addition of TA15 powder can effectively improve the microstructure and mechanical properties of the PLLC 45CrNiMoY alloy steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Low cycle fatigue behavior of Cr-Mo-V low alloy steel used for railway brake discs10.1016/j.matdes.2013.10.093 ↗
2. Thermal behavior and grain evolution of 24CrNiMoY alloy steel prepared by pre-laid laser cladding technology10.1016/j.optlastec.2019.105613 ↗
3. Selective laser melting of in situ titanium-titanium boride composites: processing, microstructure and mechanical properties10.1016/j.actamat.2014.05.022 ↗
4. In-situ TiC particle reinforced Ti-Al matrix composites: powder preparation by mechanical alloying and selective laser melting behavior10.1016/j.apsusc.2009.07.008 ↗
5. The effect of Ti addition on the microstructure and properties of high chromium iron-based coatings10.1016/j.jallcom.2018.05.230 ↗
6. Cracking behavior in the transitional region of laser-clad coatings on Al-Si alloy under multiple impact loading10.1016/S1044-5803(03)00014-7 ↗
7. The evolution of bainite and mechanical properties of direct laser deposition 12CrNi2 alloy steel at different laser power10.1016/j.msea.2018.10.092 ↗
8. Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions10.1016/j.matchar.2019.109817 ↗
9. Effect of Mo on the VC–VB particles reinforced Fe-based composite coatings10.1080/02670836.2016.1204084 ↗
10. Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance10.1016/j.compstruct.2018.03.008 ↗
11. In situ formation of titanium carbide using titanium and carbon-nanotube powders by laser cladding10.1016/j.apsusc.2011.11.058 ↗
12. Formation mechanism and phase evolution of in situ synthesizing TiC-reinforced 316L stainless steel matrix composites by laser melting deposition10.1016/j.matlet.2018.01.097 ↗
13. Effect of nano-sized TiC particle addition on microstructure and mechanical properties of SA-106B carbon steel10.1016/j.msea.2015.07.026 ↗
14. In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting10.1016/j.jallcom.2017.01.149 ↗
15. In situ formation of TiC-particle-reinforced stainless steel matrix nanocomposites during ball milling: feed stock powder preparation for selective laser melting at various energy densities10.1016/j.powtec.2017.11.064 ↗
16. Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting10.1016/j.msea.2017.11.126 ↗
17. Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: experimental and simulation methods10.1016/j.jmatprotec.2018.01.028 ↗
18. Densification behavior and mechanical properties of nanocrystalline TiC reinforced 316L stainless steel composite parts fabricated by selective laser melting10.1016/j.optlastec.2018.01.005 ↗
19. Microstructure and wear properties of the Fe-Ti-V-Mo-C hardfacing alloy10.1016/j.wear.2007.12.001 ↗
20. Microstructure evolution of in-situ (Ti,W)C-Al2O3particle-reinforced alloy fabricated by gas tungsten arc cladding10.1016/j.surfcoat.2018.09.012 ↗
21. Effects of pulse parameters on in-situ Ti-V carbides size and properties of Fe-based laser cladding layers10.1016/j.surfcoat.2018.03.021 ↗
22. Fabrication of multiple carbide particles reinforced Fe-based surface hardfacing layer produced by gas tungsten arc welding process10.1016/j.surfcoat.2008.09.020 ↗
23. Microstructure and properties of Fe-based composite coating by laser cladding Fe-Ti-V-Cr-C-CeO2 powder10.1016/j.optlastec.2014.06.016 ↗
24. Effect of atomization pressure on the breakup of TA15 titanium alloy powder prepared by EIGA method for laser 3D printing10.1016/j.vacuum.2017.06.014 ↗
25. Microstructure and wear behaviour of FeAl-based composites containing in-situ carbides10.1007/s12034-016-1326-4 ↗
26. Microstructure and corrosion behaviour of laser-cladding Al-Ni-TiC-CeO2 composite coatings on S355 offshore steel10.1016/j.jallcom.2018.08.058 ↗
27. Effects of Mo addition on crack tip opening displacement (CTOD) in heat affected zones (HAZs) of high-strength low-alloy (HSLA) steels
28. Selective laser melting of 24CrNiMo steel for brake disc: fabrication efficiency, microstructure evolution, and properties10.1016/j.optlastec.2018.05.033 ↗
29. Effect of nano-Y2O3 on microstructure and crack formation in laser direct-deposited in situ particle-reinforced Fe-based coatings10.1007/s11665-017-2949-3 ↗
30. Mechanical performance and oxidation resistance of an ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing10.1016/j.intermet.2017.09.004 ↗
31. Mechanical properties of the hypereutectoid Fe-Cr-C hardfacing coatings with different nano-Y2O3 additives and the mechanism analysis10.1016/j.msea.2015.12.087 ↗
32. Refinement and homogenization of M7C3 carbide in hypereutectic Fe-Cr-C coating by Y2O3 and TiC10.1016/j.matchar.2017.08.004 ↗
33. Acicular ferrite formation on Ti-rare earth metal-Zr complex oxides10.2355/isijinternational.55.250 ↗
34. Characterization of MnS particles in heavy rail steels using different methods10.1002/srin.201600080 ↗
35. In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering10.1016/j.jmst.2017.03.006 ↗
36. Efficient photodegradation of methylene blue (MB) under solar radiation by ZrC nanoparticles10.1016/j.apt.2018.06.007 ↗
37. In situ fabrication and characterization of laminated C/ZrC ceramic via filter papers and zirconia powders10.1016/j.ceramint.2017.01.093 ↗
38. Thermal crack growth-based fatigue life prediction due to braking for a high-speed railway brake disc10.1016/j.ijfatigue.2016.02.024 ↗
39. Innovative processing of high-strength and low-cost ferritic steels strengthened by Y-Ti-O nanoclusters10.1016/j.msea.2012.03.015 ↗
40. Effect of Y2O3 and ZrO2 on the microstructure and mechanical properties of nano-ODS 21Cr-9Mn-6Ni steels10.17222/mit.2017.199 ↗
41. Evolution of microstructure and crystallographic texture during dissimilar friction stir welding of duplex stainless steel to low carbon-manganese structural steel10.1007/s11661-018-5023-3 ↗
42. Polymer viscosity, particle coalescence and mechanical performance in high-temperature laser sintering10.1007/s10853-016-9761-6 ↗
43. Physical chemistry effect of rare earth elements on metallic materials
44. Study on formation mechanism of CaO-SiO2-based inclusions in saw wire steel10.1007/s11663-017-1055-0 ↗
45. Critical thermodynamic evaluation and optimization of the MnO-SiO2-“TiO2”-“Ti2O3” system
46. Phase equilibria and thermodynamic evaluation of the Ti-V-O system in air
47. Solubility products for titanium-, vanadium-, and niobium-carbide in ferrite10.1016/S0956-716X(99)80002-8 ↗
48. Thermodynamic calculations of Fe-Zr and Fe-Zr-C systems10.1361/105497101770332965 ↗
49. Precipitation behavior of Ti in high strength steels
50. Kinetics of (Ti, V, Mo) C precipitated in γ/α matrix of Ti-V-Mo complex microalloyed steel
51. Second phaseparticle distribution and secondary recrystallistation10.1016/0956-716X(92)90146-6 ↗
52. Nanoscale cementite precipitates and comprehensive strengthening mechanism of steel10.1007/s11661-011-0767-z ↗
53. Effect of cooling rate and laser process parameters on additive manufactured Fe-Ti-C metal matrix composites microstructure and carbide morphology10.1016/j.jmapro.2014.07.002 ↗