Thermoelectrical power analysis of precipitation in 6013 aluminum alloy
Source abstract
Abstract
The 6013 aluminum alloy was first developed for application in the aircraft industry and, more recently, as a replacement option for the use of the 6061 alloy in the automotive industry. The present work describes the evolution of the process of formation and dissolution of different kinds of precipitates in 6013 aluminum alloy, subjected to different conditions of heat treatment, using for this purpose measurements of thermoelectrical power, Vickers microhardness and differential scanning calorimeter (DSC). Although in the last years many works have been published on the use of thermoelectrical power (TEP) measurements for the analysis of precipitation process in traditional alloys such as 6061, there is still little information related to 6013 alloy. The results obtained are compared with a previous characterization work on the same alloy using transmission electron microscopy. It was observed that TEP measurements are very sensitive to precipitation phenomena in this alloy, and it has been found that there is an inverse relation between TEP and Vickers microhardness values, which allowed proposing a precipitation sequence for 6013 aluminum alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Microstructural control of aluminum sheet used in automotive applications10.1016/1044-5803(95)00065-8 ↗
2. A rationalization of factors affecting strength, ductility and toughness of AA6061-type Al–Mg–Si–(Cu) alloys10.1016/S0921-5093(98)00761-8 ↗
3. Effects of Cu content and preaging on precipitation characteristics in aluminum alloy 602210.1007/s11661-000-0272-2 ↗
4. The effect of Cu additions on the precipitation kinetics in an Al–Mg–Si alloy with excess Si10.1007/s11661-001-0254-z ↗
5. Correlation between the microstructural evolution of a 6061 aluminium alloy and the evolution of its thermoelectric power10.1016/S1359-6454(00)00085-9 ↗
6. Identification of precipitates in 6013 aluminum alloy (Al–Mg–Si–Cu)
7. Albuquerque WV. Study of Precipitation Kinetics of Aluminum Nitride in Steels through Thermoelectrical Power Measurements (in Portuguese), M.Sc. Dissertation, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil; 1993.
8. Thermoelectric power (TEP) measurements as a Materials Characterization technique
9. Appareil de caractérisation des alliages par mesure de leur pouvoir fsthérmoélectrique
10. The effect of cooling rate from the melt on the recrystallization behavior of hot rolled and solution heat treated aluminum alloy 601310.1007/s11661-997-0171-x ↗
11. The effect of iron and manganese on the recrystallization of hot rolled and solution-heat-treated aluminum alloy 601310.1007/BF02647743 ↗
12. The effect of natural ageing on the evolution of yield strength during artificial ageing for Al–Mg–Si-alloys10.1016/S0921-5093(97)00192-5 ↗
13. Transmission electron microscopy study of morphology and precipitate overcoming processes in aluminum alloy 6056-T610.1016/S0921-5093(97)00274-8 ↗
14. Precipitation in Al–Mg–Si–Cu alloys and the role of the Q phase and its precursors
15. Hatch · 1984
16. Temperature and concentration dependences of thermoelectric power at high temperatures in some aluminium alloys10.1016/0025-5416(82)90132-X ↗
17. Blazec · 1973
18. Speyer · 1994
19. Skoog · 1992
20. La Calorimetrie Differentielle à Balayage
21. Precipitation hardening in aluminum alloy 602210.1016/S1359-6462(99)00046-9 ↗
22. The precipitation sequence in Al–Mg–Si alloys10.1016/S1359-6454(98)00059-7 ↗
23. Stability of metastable phases and microstructures in the ageing process of Al–Mg–Si ternary alloys10.1023/A:1004355824857 ↗
24. Effect of silicon addition on the composition and structure of fine-scale precipitates in Al–Mg–Si alloys10.1016/S1359-6462(96)00358-2 ↗
25. Effect of cold rolling and aging treatment on mechanical property and precipitation behavior in a Al–Mg–Si alloy10.4028/www.scientific.net/MSF.217-222.827 ↗
26. Calorimetric studies of precipitation and dissolution kinetics in aluminum alloys 2219 and 707510.1007/BF02642389 ↗
27. Calorimetric studies of 7000 series aluminum alloys: I. Matrix characterization of 7075