Microstructural and magnetic characterization of iron precipitation in Ni–Fe–Al alloys
Source abstract
Abstract
The influence of annealing on the microstructural evolution and magnetic properties of Ni{sub 50}Fe{sub x}Al{sub 50-x} alloys for x = 20, 25, and 30 has been investigated. Solidification microstructures of as-cast alloys reveal coarse grains of a single B2 type {beta}-phase and typical off eutectic microstructure consisting of proeutectic B2 type {beta} dendrites and interdendritic eutectic for x = 20 and x > 20 at.% Fe respectively. However, annealing at 1073 K results in the formation of FCC {gamma}-phase particles along the grain boundaries as well as grain interior in x = 20 at.% Fe alloy. The volume fraction of interdentritic eutectic regions tend to decrease and their morphologies start to degenerate by forming FCC {gamma}-phase for x > 20 at.% Fe alloys with increasing annealing temperatures. Increasing Fe content of alloys induce an enhancement in magnetization and a rise in the Curie transition temperature (T{sub C}). Temperature scan magnetic measurements and transmission electron microscopy reveal that a transient rise in the magnetization at temperatures well above the T{sub C} of the alloys would be attributed to the precipitation of a nano-scale ferromagnetic BCC {alpha}-Fe phase. Retained magnetization above the Curie transition temperature of alloy matrix, together with enhanced roommore » temperature saturation magnetization of alloys annealed at favorable temperatures support the presence of ferromagnetic precipitates. These nano-scale precipitates are shown to induce significant precipitation hardening of the {beta}-phase in conjunction with enhanced room temperature saturation magnetization in particular when an annealing temperature of 673 K is used. - Research Highlights: {yields} Evolution of microstructure and magnetic properties with varying Fe content. {yields} Transient rise in magnetization via the formation of ferromagnetic phase. {yields} Enhancements in saturation magnetization owing to precipitated ferromagnetic phase. {yields} Nanoscale precipitation of ferromagnetic BCC {alpha}-Fe confirmed by TEM. {yields} Hardness of the {beta}-phase correlates with room temperature saturation magnetization.« less
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Shape Memory Alloy Transformations · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Overview no. 104 the physical and mechanical properties of NiAl10.1016/0956-7151(93)90001-9 ↗
2. Effect of Au addition on the microstructure and mechanical properties of NiAl intermetallic compound10.1016/j.intermet.2009.10.015 ↗
3. Improvement of the mechanical properties in a nanocrystalline NiAl intermetallic alloy with Fe, Ga and Mo additions10.1016/S0921-5093(02)00563-4 ↗
4. Microstructures and mechanical properties of a directionally solidified NiAl–Mo eutectic alloy10.1016/j.actamat.2004.09.003 ↗
5. The phosphorus effect on the superplastic deformation of NiAl10.1016/S0921-5093(03)00411-8 ↗
6. Effect of ternary elements on a martensitic transformation in [beta]-NiAl10.1016/j.intermet.2009.12.017 ↗
7. Mechanistic aspects of Pt-modified beta-NiAl alloy oxidation10.3184/096034009X463907 ↗
8. Partial martensitic transformation of nanocrystalline NiAl intermetallic during mechanical alloying10.1016/j.jallcom.2009.03.156 ↗
9. Plasticity in multiphase intermetallics10.1016/S0966-9795(00)00079-0 ↗
10. The effect of annealing on Ni–Al–Fe b2 compounds10.1016/0921-5093(92)90076-D ↗
11. Characterization, processing, and alloy design of NiAl-based shape memory alloys (reprinted from materials characterization, vol. 32, pg 139–160, 1994)10.1016/S1044-5803(97)00149-6 ↗
12. Microstructural evolution in ductile beta(b2)+gamma'(l1(2)) Ni–Al–Fe alloys10.1016/0966-9795(95)00016-R ↗
13. Microstructure and mechanical-properties of rapidly quenched l20 and l20+l12 alloys in Ni–Al–Fe and Ni–Al–Co systems10.1007/BF01026989 ↗
14. Room-temperature deformation behavior of directionally solidified multiphase Ni–Fe–Al alloys
15. Miscibility gap in Fe–Ni–Al and Fe–Ni–Al–Co systems10.1007/BF02664895 ↗
16. The effects of the point defects on precipitation in NiAlFe alloys10.1016/S1359-6462(98)00297-8 ↗
17. Magnetic monitoring of the disproportionation behavior in Sm–Fe-based materials10.1109/TMAG.2004.830155 ↗
18. An x-ray study of the iron–nickel–aluminium ternary equilibrium diagram10.1098/rspa.1938.0098 ↗
19. Assessment of the Fe–Ni–Al system10.1016/j.intermet.2005.11.021 ↗
20. Site preference of ternary Fe addition in Ni75Al2510.1088/0953-8984/15/29/302 ↗
21. Thermoelastic martensitic transformation in ferromagnetic Ni–Fe–Al alloys: effect of site disorder10.1063/1.2337271 ↗
22. Mechanical alloying synthesis and structural characterization of ternary Ni–Al–Fe alloys10.1023/A:1018607820275 ↗
23. Neutron diffraction study of the structure and low-temperature phase transformation in ternary NiAl+M (M=Ni, Fe, Co) alloys10.1016/j.scriptamat.2006.12.043 ↗
24. Effects of aging and Co addition on martensitic and magnetic transitions in Ni–Al–Fe beta-based shape memory alloys10.2355/isijinternational.46.1287 ↗
25. Magnetic and martensitic phase transitions in the Ni–Al–Fe shape memory alloys
26. Microscopical studies on the iron nickel aluminium system .2. The breakdown of the body-centred cubic lattice
27. Effect of ternary additions of iron on microstructure and microhardness of the intermetallic NiAl in reactive sintering10.1016/j.jallcom.2004.04.077 ↗