Revealing the role of strain rate during multi-pass compression in an advanced polycrystalline nickel base superalloy
Source abstract
Abstract
Abstract In the single-pass hot compression of polycrystalline nickel base superalloy, inhomogeneous grain size distribution and grain growth frequently occur. For comparison, a multi-pass compression approach is employed to investigate the effect of strain rate on the flow stress and grain size evolution. By means of imposing different strain rates, the results show that the finest grain size corresponds to the second-pass strain rate of 0.1 s − 1 , while the coarsest grain size arises from a combination of the first-pass strain rate of 0.001 s − 1 and the second-pass strain rate of 0.01 s − 1 , respectively. A bimodal grain size distribution easily forms under the second-pass strain rate of 0.001 s − 1 . The microscopic analysis discloses the critical roles of dynamic recrystallization (DRX) nucleation rate together with static recrystallization (SRX) in controlling the grain size development. The experimental results provide new insights to optimize the forging process of nickel base superalloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and propertie10.2514/1.18239 ↗
2. Effect of deformation temperature and strain rate on dynamic recrystallized grain size of a powder metallurgical nickel-based superalloy10.1016/j.jallcom.2016.08.216 ↗
3. The effects of thermomechanical history on the microstructure of a nickel-base superalloy during forging10.1016/j.msea.2016.05.051 ↗
4. Characterization of hot compression behavior of a new HIPed nickel-based P/M superalloy using processing maps10.1016/j.matdes.2015.08.035 ↗
5. The effect of forging variables on the supersolvus heat-treatment response of powder-metallurgy nickel-base superalloys10.1007/s11661-014-2572-y ↗
6. Plastic flow and microstructure evolution during thermomechanical processing of a PM nickel-base superalloy10.1007/s11661-013-1675-1 ↗
7. The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1B10.1016/j.jallcom.2012.08.123 ↗
8. Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation10.1016/j.matdes.2015.05.004 ↗
9. Influence of processing parameters on grain size evolution of a forged superalloy10.1007/s11665-015-1828-z ↗
10. Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy10.1016/j.jallcom.2016.04.185 ↗
11. Microstructure evolutions and nucleation mechanisms of dynamic recrystallization of a powder metallurgy Ni-based superalloy during hot compression10.1016/j.msea.2016.09.083 ↗
12. Characterization of plastic flow pertinent to the evolution of bulk residual stress in powder-metallurgy, nickel-base superalloys10.1007/s11661-015-3033-y ↗
13. Nucleation mechanisms of dynamic recrystallization in Inconel 625 superalloy deformed with different strain rates10.1007/s12598-012-0494-7 ↗
14. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
15. The effect of strain distribution on microstructural developments during forging in a newly developed nickel base superalloy10.1016/j.msea.2015.12.042 ↗
16. Evolution of microstructure and twin density during thermomechanical processing in a γ-γ′ nickel-based superalloy10.1016/j.actamat.2012.06.028 ↗
17. Recrystallization and the development of abnormally large grains after small strain deformation in a polycrystalline nickel-based superalloy10.1007/s11661-016-3329-6 ↗
18. Selective growth of low stored energy grains during δ sub-solvus annealing in the Inconel 718 nickel-based superalloy10.1007/s11661-015-3035-9 ↗
19. An examination of abnormal grain growth in low strain nickel-200
20. Control of grain size via forging strain rate limits for R′88DT
21. Study on constitutive relationships and processing maps for FGH96 alloy during two-pass hot deformation10.1016/j.msea.2013.10.034 ↗
22. Heteroepitaxial recrystallization: a new mechanism discovered in a polycrystalline γ-γ' nickel based superalloy10.1016/j.jallcom.2016.07.240 ↗
23. High work-hardening rate and deformation twinning of Co-Ni-based superalloy at elevated temperatures10.1080/01418619908210378 ↗
24. Rollett · 2004
25. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
26. Recrystallization of the hot isostatic pressed nickel-base superalloy FGH4096: I. Microstructure and mechanism10.1016/j.msea.2011.07.053 ↗
27. Flow behavior and microstructures of superalloy 718 during high temperature deformation10.1016/j.msea.2008.07.046 ↗
28. An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation10.1016/j.msea.2013.07.037 ↗
29. Fatigue crack growth resistant nickel-base article and alloy and method for making
30. Method of controlling and refining final grain size in supersolvus heat treated nickel-base superalloys
31. Grain size control in nickel base superalloys
32. The Avrami kinetics of dynamic recrystallization10.1016/j.actamat.2009.02.033 ↗