Quantitative study of the microstructure evolution along the thickness direction in the nickel-based single crystal superalloy DD6 at 1323 K thermal exposure
Source abstract
Abstract
Abstract The wall thickness of turbine blade is becoming thinner because of the need for cooling, which leads to the thickness debit effect. The microstructure evolution along the thickness is deemed one of the major factors. The present work quantitatively investigates the microstructure evolution along the thickness of a second generation nickel-based single crystal superalloys DD6 under pure thermal condition. Experiments are performed on specimens with thickness of 0.3 mm, 0.6 mm and 1.5 mm. Microstructure is analyzed using scanning electron microscopy (SEM) in combination with quantitative image analysis. The interplay of oxidation and substrate causes apparently different microstructures along the thickness which are classified into three layers except the base material layer. The growth of each layer is barely influenced by the specimen thickness and their evolutions with time are fitted by both logarithmic and power equations. The microstructure along the thickness is not obvious different in the base material layer by naked eyes. Quantitative analysis of the average size and probability distribution function of the γ′ particle area and circularity reveals the variation of microstructure along the thickness. The average size of the γ′ particle area increases with the increase of the distance from the thickness symmetry axis. The average value of circularity at the position with the same distance from the thickness symmetry axis is larger in the thin specimen than that in the thick specimen, which represents more severe rafting in the thin specimen. A diffusional mechanism is used to interpret the observed microstructure changes at the base material layer. The new findings are important for mechanical performance analysis of thin-walled structure in turbine blade applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Reliability based multidisciplinary design optimization of cooling turbine blade considering uncertainty data statistics10.1007/s00158-018-2081-5 ↗
2. On the thin-section size dependent creep strength of a single crystal nickel-base superalloy10.1007/BF00369679 ↗
3. Thickness influence on creep properties for Ni-based superalloy M247LC SX10.1016/j.msea.2012.04.067 ↗
4. Effect of specimen thickness on the creep response of a Ni-based single-crystal superalloy10.1016/j.actamat.2012.06.043 ↗
5. Combined effects of thin-section size, grain size and cavities on the high temperature creep fracture properties of a nickel-base superalloy10.1023/A:1018506628065 ↗
6. The effect of thickness on the creep properties of a single-crystal nickel-based superalloy10.1016/j.msea.2018.04.114 ↗
7. M. Doner, J. Heckler, Identification of mechanisms responsible for degradation in thin-wall stress rupture properties, Superalloys 2004, Duhl DN, et al., Editors (1988).10.7449/1988/Superalloys_1988_653_662 ↗
8. Thickness debit in creep properties of PWA 148410.7449/2004/Superalloys_2004_207_214 ↗
9. Creep behavior of thick and thin walled structures of a single crystal nickel-base superalloy at high temperatures — experimental method and results
10. Thickness influence on the creep response of DD6 Ni-based single-crystal superalloy10.1515/htmp-2015-0110 ↗
11. High-temperature oxidation behavior of two nickel-based superalloys produced by metal injection molding for aero engine applications10.1007/s11661-014-2391-1 ↗
12. Creep and oxidation behaviour of coated and uncoated thin walled single crystal samples of the alloy PWA1484
13. Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy Rene N5 at 980 °C10.1016/j.actamat.2009.11.004 ↗
14. Oxidation behavior of a single-crystal Ni-base superalloy in air. I: at 800 and 900 °C10.1023/A:1023604214245 ↗
15. Modelling of composition and phase changes in multiphase alloys due to growth of an oxide layer10.1016/j.actamat.2008.06.010 ↗
16. Oxidation behavior of GTD111 Ni-based superalloy at 900 °C in air10.1016/j.corsci.2015.07.031 ↗
17. Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications10.1016/j.actamat.2010.09.027 ↗
18. Microstructural evolution of oxidation film on a single crystal nickel-based superalloy at 980 °C
19. Hot corrosion behavior of Ni based Inconel 617 and Inconel 738 superalloys10.1016/j.apsusc.2016.03.181 ↗
20. Influence of surface roughness on the oxidation behavior of a Ni-4.0Cr-5.7Al single crystal superalloy10.1016/j.apsusc.2018.01.226 ↗
21. Static and dynamic aspects of coupling between creep behavior and oxidation on MC2 single crystal superalloy at 1150 °C10.1016/j.actamat.2005.05.018 ↗
22. Modelling of high temperature oxidation of alumina-forming single-crystal nickel-base superalloys10.1016/j.actamat.2012.06.036 ↗
23. Influence of oxidation on near-surface γ′ fraction and resulting creep behaviour of single crystal Ni-base superalloy M247LC SX10.1016/j.msea.2013.04.032 ↗
24. Role of volatilization of molybdenum oxides during the cyclic oxidation of high-Mo containing Ni-based single crystal superalloys10.1016/j.corsci.2017.08.025 ↗
25. Influence of stress and secondary orientation on the oxidation-induced dynamic recrystallization behavior of a Ni-based single crystal superalloy10.1016/j.jallcom.2017.02.251 ↗
26. Quantitative analysis of diffusion processes associated with γ′-depletion in Ni-base superalloys
27. Creep behaviour of Ni-base single-crystal superalloys with various γ volume fraction10.1016/j.actamat.2004.04.028 ↗
28. The role of microstructural morphology on creep properties of a [0 0 1] oriented nickel-base single crystal superalloy
29. Tensorial nature of γ′-rafting evolution in nickel-based single crystal superalloys10.1016/j.actamat.2018.07.033 ↗
30. The influence of high temperature annealing and creep on the microstructure and chemical element distribution in the γ, γ′ and TCP phases in single crystal Ni-base superalloy10.1016/j.jallcom.2017.10.076 ↗
31. Deformation mechanisms and analysis of a single crystal nickel-based superalloy during tensile at room temperature10.1016/j.msea.2018.11.139 ↗
32. Oxidation behavior and mechanism of a Ni-based single crystal superalloy with single α-Al2O3 film at 1000 °C10.1016/j.apsusc.2017.03.116 ↗
33. Birks · 2006 · 2013(1)
34. Kinetics of the topological inversion of the γ/γ′-microstructure during creep of a nickel-based superalloy10.1016/S1359-6454(01)00290-7 ↗
35. Quantification of rafting of γ′ precipitates in Ni-based superalloys10.1016/j.actamat.2015.09.060 ↗
36. Gamma prime coarsening in a nickel base single crystal superalloy10.1016/j.matlet.2014.04.185 ↗
37. Diffusion behaviors of Rh, Ta, W, Re, Os and Ir in ternary L12-Ni3Al alloys10.1016/j.intermet.2018.08.005 ↗
38. The growth of dispersed precipitates in solutions10.1016/0001-6160(56)90060-8 ↗
39. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
40. Wagner · 1961 · vol. 65 · 581
41. Coarsening behaviour of a Ni-base superalloy under different heat treatment conditions10.1016/j.msea.2006.12.107 ↗
42. Microstructure evolution and creep behaviors of a directionally solidified nickel-base alloy under long-life service condition10.1016/j.msea.2016.07.041 ↗
43. Coarsening kinetics of cuboidal gamma prime precipitates in single crystal nickel base superalloy CMSX-4