journal article·2018-08

Microstructure and nanoindentation analysis of Mg-SiC nanocomposite powders synthesized by mechanical milling

A. Ghasemi, D. Penther, S. Kamrani

Publisher page

Abstract

Abstract Mixtures of magnesium powder and SiC nanoparticles at various volume fractions were mechanically milled to produce nanocrystalline Mg-SiC nanocomposites. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to characterize the microstructure of the milled powders. The microstructural evidences revealed that mechanical milling is a proper method to achieve a uniform distribution of the SiC nanoparticles, even up to 10% in the Mg matrix. Based on the results, higher volume fraction of the SiC nanoparticles raise the value of measured microstrain and reduce the crystallite size of the Mg matrix. The TEM results pointed to the fact that no deformation twinning takes place in the nanostructured Mg matrix even after severe plastic deformation through mechanical milling and the presence of hard SiC nanoparticles up to 10 vol%. The effects of nanoparticle volume fraction on mechanical properties of the milled Mg-SiC nanocomposites were evaluated using nanoindentation tests. The results clearly showed a significant enhancement of nanohardness and reduced elastic modulus in the milled powders compared to that of the reference material namely as-received pure magnesium. It was found that the SiC nanoparticles (even up to 10 vol%), well distributed in the magnesium matrix, remarkably improve the reduced elastic modulus and nanohardness of the nanocomposite powders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Fabrication of B4C particulate reinforced magnesium matrix composite by powder metallurgy10.1016/j.jallcom.2004.06.015 ↗
2. Microstructure and heterogeneous nucleation phenomena in cast SiC particles reinforced magnesium composite10.1016/S0921-5093(99)00707-8 ↗
3. The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates10.1016/j.matlet.2005.02.020 ↗
4. Study on fracture behavior of particulate reinforced magnesium matrix composite using in situ SEM10.1016/j.compscitech.2007.01.022 ↗
5. Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process10.1016/j.msea.2007.01.052 ↗
6. Structural analysis of the MgAl5 matrix cast composites containing SiC particles10.1016/S0921-5093(00)00926-6 ↗
7. Magnesium: properties - applications - potential10.1016/S0921-5093(00)01351-4 ↗
8. The effects of yttrium element on microstructure and mechanical properties of Mg–5 wt.% Zn–2 wt.% Al alloy10.1016/j.msea.2005.04.011 ↗
9. Sheet texture modification in magnesium-based alloys by selective rare earth alloying10.1016/j.msea.2011.01.080 ↗
10. Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates10.1016/j.jallcom.2007.05.038 ↗
11. Simultaneous enhancement in strength and ductility by reinforcing magnesium with carbon nanotubes10.1016/j.msea.2005.10.071 ↗
12. Effect of length scale of Al2O3 particulates on microstructural and tensile properties of elemental mg10.1016/j.msea.2006.03.029 ↗
13. Properties of magnesium alloys reinforced with nanoparticles and carbon nanotubes: a review10.1007/s10853-010-5010-6 ↗
14. Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response10.1016/j.jallcom.2014.06.163 ↗
15. Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties10.1002/adem.200700106 ↗
16. Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique10.1088/0957-4484/17/1/002 ↗
17. Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates10.1016/j.jallcom.2007.05.038 ↗
18. Development of nano-Y2O3 containing magnesium nanocomposites using solidification processing10.1016/j.jallcom.2006.04.033 ↗
19. Development of SiCp/AZ91 magnesium matrix nanocomposites using ultrasonic vibration10.1016/j.msea.2012.01.112 ↗
20. Influence of nano-alumina and sub-micron copper on mechanical properties of magnesium alloy AZ3110.1016/j.compositesb.2013.06.041 ↗
21. Effect of graphene nanoplate and silicon carbide nanoparticle reinforcement on mechanical and tribological properties of spark plasma sintered magnesium matrix composites10.1016/j.jmst.2014.08.002 ↗
22. Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites10.1016/j.jallcom.2010.05.159 ↗
23. The effect of mechanical alloying on SiC distribution and the properties of 6061 aluminum composite10.1016/j.jmatprotec.2005.06.037 ↗
24. 6061 Al reinforced with silicon nitride particles processed by mechanical milling10.1016/S1359-6462(02)00133-1 ↗
25. Processing of advanced materials using high-energy mechanical milling10.1016/S0079-6425(03)00034-3 ↗
26. Enhanced mechanical properties of an Al based metal matrix composite prepared using mechanical alloying10.1016/S0921-5093(98)00676-5 ↗
27. X-ray line broadening from filed aluminum and wolfram10.1016/0001-6160(53)90006-6 ↗
28. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
29. Development and characterization of Mg-SiC nanocomposite powders synthesized by mechanical milling10.4028/www.scientific.net/KEM.742.165 ↗
30. Determination of the Gaussian and Lorentzian content of experimental line shapes10.1063/1.1686503 ↗
31. Deformation behavior of ultrafine-grain (UFG) AZ31B mg alloy at room temperature10.1016/j.actamat.2006.06.043 ↗
32. A rationale for the strong dependence of mechanical twinning on grain size10.1016/j.scriptamat.2008.05.027 ↗
33. Nanomechanical analysis of AZ31 magnesium alloy and pure magnesium correlated with crystallographic orientation10.1016/j.msea.2015.07.055 ↗
34. Distinguishing between slip and twinning events during nanoindentation of magnesium alloy AZ3110.1016/j.scriptamat.2015.07.034 ↗
35. On the strength and strain to failure in particle-reinforced magnesium metal-matrix nanocomposites (Mg MMNCs)10.1016/j.msea.2012.07.111 ↗
36. Nanocrystalline materials10.1016/0079-6425(89)90001-7 ↗
37. Sintering of magnesium10.1002/adem.201000038 ↗