Analysis of forming limit and deformation uniformity under cryogenic biaxial stress conditions
Source abstract
Abstract
Cryogenic forming has been proposed as a viable method for forming thin-walled components with complex geometries that involve complex stress conditions. Evaluating the cryogenic formability of sheets under varying stress conditions is crucial. In this study, a novel cryogenic sheet hydro-bulging method using dies with different elliptical ratios has been developed. The cryogenic forming limit and deformation uniformity under biaxial stress conditions of the Al-Cu-Mn alloy sheets were analyzed in detail using this method. The effect of stress conditions on cryogenic forming limit and uniform deformation ability was discussed. The mechanism for improving cryogenic formability was examined through microstructural analysis. The forming limit at −196 °C for the Al-Cu-Mn alloy sheet is significantly improved compared to that at 20 °C, especially for the tension-tension deformation zone. The FLD 0 value increases from 0.11 at 20 °C to 0.18 at −196 °C. At the biaxial tension condition with an elliptical ratio of 0.8, the limiting strain at −196 °C can reach 0.56. It demonstrates excellent cryogenic limit deformation ability under biaxial tension stress conditions, which is beneficial for forming complex thin-walled components. The deformation uniformity at −196 °C is significantly improved compared to that at 20 °C, attributed to enhanced strain hardening at −196 °C resulting from a substantial number of well-developed dislocation cells and uniform dislocation networks. The results of this study can provide valuable guidance for the cryogenic forming of thin-walled components with complex geometries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
2. Development and application prospects of aluminum-Lithium alloys in aircraft and space technology10.1007/s11015-021-01134-9 ↗
3. Room temperature forming of AA7075 aluminum alloys: W-temper process10.4028/www.scientific.net/KEM.651-653.199 ↗
4. A review on forming techniques for manufacturing lightweight complex-shaped aluminium panel components
5. Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA575410.1016/j.ijmachtools.2014.07.008 ↗
6. A novel quench-form and in-die creep age process for hot forming of 2219 thin aluminum sheets with high precision and efficiency10.1016/j.jmatprotec.2023.117931 ↗
7. Multi-mode distortion behavior of aluminum alloy thin sheets in immersion quenching10.1016/j.jmatprotec.2019.116576 ↗
8. Deformation behavior of Al-Cu-Mn alloy sheets under biaxial stress at cryogenic temperatures10.1016/j.msea.2019.05.047 ↗
9. Wrinkling suppression in cryogenic forming of high-strength Al-alloy ultra-thin shells by controlling interface shear stress10.1016/j.ijmachtools.2024.104193 ↗
10. Novel forming process for aluminum alloy thin shells at ultra-low temperature gradient10.1016/j.ijmachtools.2022.103992 ↗
11. Investigation on the formability and deformation mechanism of aluminum alloy thin-walled parts at cryogenic temperature10.1016/j.jmatprotec.2023.118041 ↗
12. Cryogenic forming of Al-Mg alloy sheet for car outer body applications10.1002/adem.201900089 ↗
13. An efficient pre-hardened cryogenic forming process for AA7075 aluminum alloy sheets10.1016/j.jmapro.2023.02.061 ↗
14. A dislocation density-based model considering dynamic strain aging for annealed and water-quenched aluminum alloys under low-temperature conditions10.1016/j.msea.2022.143916 ↗
15. Effect of increased stretching deformation at cryogenic temperature on the precipitation behavior and mechanical properties of 2060 Al-Li alloy10.1016/j.msea.2021.142585 ↗
16. Cryogenic deformation behavior and failure mechanism of AA7075 alloy sheets tempered at different conditions10.1016/j.msea.2022.143396 ↗
17. Flow stress and work-hardening behaviour of Al-Mg binary alloys10.1016/j.ijplas.2014.08.006 ↗
18. Mechanism of low temperature deformation in aluminium alloys10.1016/j.msea.2020.139935 ↗
19. Flow behavior and fracture of Al-Mg-Si alloy at cryogenic temperatures10.1016/S1003-6326(21)65522-X ↗
20. Mechanical properties and surface characteristics of an AA6060 alloy strained in tension at cryogenic and room temperature10.1016/j.msea.2015.09.083 ↗
21. Cooperative enhancements in ductility and strain hardening of a solution-treated Al-Cu-Mn alloy at cryogenic temperatures10.1016/j.msea.2020.139707 ↗
22. Effects of cooling rate and cryogenic temperature on the mechanical properties and deformation characteristics of an Al-Mg-Si-Fe-Cr alloy10.1016/j.jallcom.2023.169559 ↗
23. Formability enhancement and deformation mechanism of 2195 AlLi alloy sheet in cryogenic forming10.1016/j.matchar.2022.112577 ↗
24. In-situ EBSD study on the microstructure evolution of an Al-Mg-Si-Fe alloy with different precipitation free zones during tension at cryogenic and ambient temperatures10.1016/j.msea.2023.145029 ↗
25. Cryogenic formability of a solution-treated aluminum alloy sheet at low temperatures10.1016/j.jmatprotec.2021.117295 ↗
26. Damage and fracture prediction of 7075 high-strength aluminum alloy during cryogenic stamping process10.1016/j.mechmat.2021.104080 ↗
27. A novel deep drawing process for aluminum alloy sheets at cryogenic temperatures10.1016/j.jmatprotec.2020.116743 ↗
28. Cryogenic deformation behavior of 6061 aluminum alloy tube under biaxial tension condition10.1016/j.jmatprotec.2022.117532 ↗
29. A new method of determining forming limit diagram for sheet materials by gas blow forming10.1016/j.jmatprotec.2014.06.020 ↗
30. Development of an advanced superplastic forming process utilizing a mechanical pre-forming operation10.1016/j.ijmachtools.2007.12.010 ↗
31. Experimental studies of necking and fracture limits of boron steel sheet under hot stamping conditions10.1016/j.jmatprotec.2021.117481 ↗
32. Hot deformation behavior of a 2024 aluminum alloy sheet and its modeling by fields-Backofen model considering strain rate evolution10.3390/met9020243 ↗
33. Plastic strain localization in metals: origins and consequences10.1016/j.pmatsci.2013.06.001 ↗
34. Dimensional change and springback of spherical shell in cryogenic forming10.1016/j.ijmecsci.2024.109757 ↗
35. Influence of out-of-plane stretch forming induced different strain paths on micro-texture evolution, slip system activity and Taylor factor distribution in Al-Li alloy10.1016/j.msea.2021.142267 ↗
36. Microstructure evolution of annealed 7075 aluminum alloy and its influence on room-temperature plasticity10.1016/j.matdes.2020.109192 ↗
37. The application of EBSD to the study of substructural development in a cold rolled single-phase aluminium alloy10.1016/S1359-6454(02)00513-X ↗
38. A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading10.1016/j.matchar.2016.03.020 ↗
39. The work hardening of some commercial Al alloys
40. Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications10.1016/j.actamat.2021.117288 ↗
41. Impact deformation behaviour and dislocation substructure of Al-Sc alloy10.1016/j.jallcom.2009.12.161 ↗
42. Slip band interactions and GND latent hardening in a galling resistant stainless steel10.1016/j.msea.2021.141176 ↗
43. Microvoid growth mechanism in FCC polycrystals and a statistical damage model10.1016/j.ijplas.2020.102888 ↗
44. Flow behavior and forming characteristics of 2A14 aluminum alloy at cryogenic temperatures10.1016/j.jallcom.2022.163821 ↗