Comparison of aluminium foams prepared by different methods using X-ray tomography
Source abstract
Abstract
The cell structure and mechanical properties of aluminium foams prepared by melt foaming (MF) method are supposed to be better than the ones produced by gas injection (GI) method. Preparation processes of these two methods have been developed during the last recent years. Mechanical properties of aluminium foams depend strongly on characteristics of the cell structure. Therefore, it is necessary to compare cell structures of the foams fabricated with these two methods quantitatively using X-ray computed tomography and this is the purpose of the present paper. MF and GI foams have thus been prepared. True density measurements and cell structures indicate that the volume fraction of the closed cells of MF foam with high porosity is negligible. By contrast, the majority of cells of GI foam are closed. Results of cell structure analysis show that there are more micropores in cell walls of the foams prepared by MF method compared to the ones prepared by GI method, especially for the: MF foams with low porosity. In addition, results of cell size study show that the cell size distribution is wide in. dynamic GI foams, and there are usually big holes inside MF foams. GI method is more suitable to prepare aluminium foams with high porosity compared to MF method. Furthermore, the thickness difference between normal cell wall and Plateau border is greater in GI foams, in particular for the ones produced by the static injector.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Pickering emulsions and particle stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Light-metal foams-history of innovation and technological challenges10.1002/adem.201200217 ↗
2. Metal foams: production and stability10.1002/adem.200600071 ↗
3. ALPORAS aluminium foam: production process, properties, and applications10.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G ↗
4. I. Jin, L.D. Kenny, H. Sang, Method of producing lightweight foamed metal, USA Patent 4973358, 1990.
5. H. Sang, L.D. Kenny, I. Jin, Process for producing shaped slabs of particle stabilized foamed metal, USA Patent 5334236, 1994.
6. W. Ruch, B. Kirkevag, A process of manufacturing particle reinforced metal foam and product thereof, European Patent 0483184B1, 1990.
7. F. Dobesberger, H. Flankl, D. Leitlmeier, A. Birgmann, Device and process for producing metal foam, USA Patent 7195662B2, 2007.
8. Development of a foaming process for particulate reinforced aluminium melts10.1002/1527-2648(20021014)4:10<735::AID-ADEM735>3.0.CO;2-Y ↗
9. On the mechanical performance of closed cell Al alloy foams10.1016/S1359-6454(97)00148-1 ↗
10. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
11. Comparison of aluminium foams produced by melt foaming and gas injection processes
12. Aluminium foams produced by liquid-state processes
13. 2D and 3D characterization of metal foams using X-ray tomography10.1002/1527-2648(20021014)4:10<803::AID-ADEM803>3.0.CO;2-D ↗
14. Compressive properties of aluminium foams by gas injection method
15. Foaming process and properties of 6063 aluminium foams by melt foaming method10.2320/matertrans.M2016244 ↗
16. New type of spherical pore Al alloy foam with low porosity and high strength10.1007/BF02990901 ↗
17. Effects of cell wall property on compressive performance of aluminium foams10.1016/S1003-6326(15)63766-9 ↗
18. Preparation and compressive property of foam aluminium with high porosity and small pore diameter
19. Fabrication of aluminium foams with small pore size by melt foaming method10.1007/s11663-016-0815-6 ↗
20. ALUHAB - the superior aluminium foam
21. Pilot production and properties of ALUHAB aluminium foams10.1016/j.mspro.2014.07.549 ↗
22. Sub-mm sized bubbles injected into metallic melts10.1016/j.colsurfa.2014.12.038 ↗
23. The cell size reduction of aluminium foam with dynamic gas injection based on the improved foamable melt10.1016/j.colsurfa.2017.05.023 ↗
24. N. Babcsan, S. Beke, P. Makk, Method of producing a metal foam by oscillations and thus obtained metal foam product, World Patent WO 2010/064059 A2, 2010.
25. Microstructure and mechanical properties of ALPORAS closed-cell aluminium foam10.1016/j.matchar.2015.07.012 ↗
26. X-ray tomography applied to the characterization of highly porous materials10.1146/annurev-matsci-070511-155106 ↗
27. Structural characterization of solid foams10.1016/j.crhy.2014.09.001 ↗
28. Cellular solids studied by x-ray tomography and finite element modeling - a review10.1557/jmr.2013.97 ↗
29. Structure and mechanical properties of AFS sandwiches studied by in-situ compression tests in X-ray microtomography10.1002/adem.200405152 ↗
30. Gibson · 1997
31. Comparison of quasi-static and dynamic compression behavior of closed-cell aluminium foam10.1016/j.msea.2009.07.017 ↗
32. In situ observations of compressive behaviour of aluminium foams by local tomography using high-resolution X-rays10.1080/14786430600724454 ↗
33. Microporosity in aluminium foams10.1016/j.actamat.2017.03.039 ↗
34. Relation of cell uniformity and mechanical property of a close cell aluminium foam10.1002/adem.201200135 ↗
35. Effect of pore morphology on cross-property link for close-celled metallic foams10.1088/0022-3727/49/50/505301 ↗
36. Micro–macro investigation of deformation and failure in closed-cell aluminium foams10.1016/j.commatsci.2013.10.017 ↗
37. Effect of processing parameters on cell structure of an aluminium foam10.1016/j.msea.2006.01.044 ↗
38. Cell structure and compressive behavior of an aluminium foam10.1007/s10853-005-2852-4 ↗
39. Effect of orifice diameter on bubble generation process in melt gas injection to prepare aluminium foams10.1007/s11663-016-0638-5 ↗
40. Bubble formation at a submerged orifice in high-speed horizontal oscillation10.1007/s11663-016-0776-9 ↗
41. In situ experiments with X ray tomography: an attractive tool for experimental mechanics10.1007/s11340-010-9333-7 ↗
42. Two-scale study of the fracture of an aluminium foam by X-ray tomography and finite element modeling10.1016/j.matdes.2017.02.009 ↗
43. In situ X-ray tomography measurements of deformation in cellular solids10.1557/mrs2003.82 ↗
44. Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography10.1016/j.jeurceramsoc.2006.05.097 ↗
45. An automatic segmentation algorithm for 3D cell cluster splitting using volumetric confocal images10.1111/j.1365-2818.2010.03482.x ↗
46. The stability of aluminium foams at accumulation and condensation stages in gas injection foaming process10.1016/j.colsurfa.2015.06.043 ↗
47. Stabilisation of aluminium foams and films by the joint action of dispersed particles and oxide films10.1016/j.actamat.2015.07.064 ↗
48. Preparation of foam aluminium with small pores by melt-based route of ZrH2