The problem of intermixing of metals possessing no mutual solubility upon explosion welding (Cu–Ta, Fe–Ag, Al–Ta)
Source abstract
Abstract
On the basis of the results obtained for joints of dissimilar metals such as copper-tantalum and iron-silver, the reason of immiscible suspensions mixing upon explosion welding has been cleared out. It has been found that the interface (plain or wavy) is not smooth and contains inhomogeneities, namely, cusps and local melting zones. The role of granulating fragmentation providing partitioning of initial materials as a main channel of input energy dissipation has been revealed. It has been shown that in joints of metals possessing normal solubility the local melting zones are true solutions, but if metals possess no mutual solubility the local melting zones are colloidal solutions. Realization of either emulsion or suspension variant takes place. The results can be used in the development of new joints of metals possessing no mutual solubility. - Highlights: Black-Right-Pointing-Pointer Immiscible pairs Ta/Cu and Fe/Ag are welded successfully by explosive welding. Black-Right-Pointing-Pointer Fragmentation provides for partitioning as the main energy dissipation channel. Black-Right-Pointing-Pointer Immiscible metals form colloidal solid solutions during solidification. Black-Right-Pointing-Pointer Melting and boiling temperatures ratio determines the colloidal solution type. Black-Right-Pointing-Pointer Local melting zones being in suspension form enhance welds hardening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Applications · Engineering and Environmental Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Deribas · 1980
2. Lysak · 2005
3. Lower boundary in metal explosive welding. Evolution of ideas10.1016/j.jmatprotec.2011.08.017 ↗
4. Formation of vortices during explosion welding (titanium–orthorhombic titanium aluminide)10.1134/S0031918X09100056 ↗
5. Structure of the welding zone between titanium and orthorhombic titanium aluminide for explosion welding: I. interface10.1134/S0036029511100107 ↗
6. Structure of the welding zone between titanium and orthorhombic titanium aluminide for explosion welding: II. Local melting zones10.1134/S0036029511100053 ↗
7. Nanostructure of vortex during explosion welding10.1166/jnn.2011.3513 ↗
8. Peculiarities of formation of structure in the transition zone of the Cu–Ta joint made by explosion welding
9. Fragmentation of Rings and Shells
10. Dynamic tensile extrusion response of tantalum10.1016/j.actamat.2008.07.054 ↗
11. Rybin · 1986
12. Microstructure of bimetallic joint of titanium and orthorhombic titanium aluminide (explosion welding)
13. Fragmentation of shell cases10.1098/rspa.1947.0042 ↗
14. Recent successes in tantalum clad pressure vessel manufacture: a new generation of tantalum clad vessels