journal article·2018-08

Microstructural characterization of laser metal powder deposited Alloy 718

Andreas Segerstark, Joel Andersson, Lars-Erik Svensson, Olanrewaju Ojo

Publisher page

Abstract

Abstract A microstructural study of Laser Metal Powder Deposition (LMPD) of Alloy 718, using a low (40 J/mm) and high (100 J/mm) heat inputs (HIs) was performed. The microstructure was characterized in as-deposited condition as well as after a standard heat-treatment, using optical microscope (OM), scanning electron microscope (SEM) and Transmission Electron Microscope (TEM). Laves, MC-carbides, γ′ and γ″ are observed in the interdendritic areas of both conditions. However, the dendritic core only consists of γ-matrix. The high HI condition shows a slightly larger Primary Dendrite Arm Spacing (PDAS) as compared to the low HI condition. Additionally, the particle size of the Nb-rich constituents in the interdendritic regions (Laves-phase and Niobium carbide) is larger in the high HI sample. After heat-treatment, the Laves phase dissolves and is replaced by δ-phase in the interdendritic regions, while γ′, γ″ and MC-carbide remain in the interdendritic regions. However, the γ″ precipitates seems to be less developed in the dendritic core as compared to the interdendritic regions, especially in the high HI sample. This can be attributed to a heterogeneous distribution of Nb in the microstructure, with a lower Nb content in the dendritic core as compared to close to the interdendritic regions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Texture control during laser deposition of nickel-based superalloy10.1016/j.scriptamat.2012.06.014 ↗
2. Microstructural and texture development in direct laser fabricated IN71810.1016/j.matchar.2013.12.012 ↗
3. Gibson · 2015
4. Thermal and microstructural aspects of the laser direct metal deposition of waspaloy10.2351/1.2227018 ↗
5. Effect of precipitation on the microhardness distribution of diode laser epitaxially deposited IN718 alloy coating10.1016/j.jmst.2013.01.002 ↗
6. Rationalization of microstructure heterogeneity in INCONEL 718 builds made by the direct laser additive manufacturing process
7. Influence of heat input on grain structure in thin-wall deposits using laser metal powder deposition
8. Practice for determining the inclusion or second-phase constituent content of metals by automatic image analysis
9. Evaluation of a temperature measurement method developed for laser metal deposition
10. M. L. Barron, “Crack Growth-based Predictive Methodology for the Maintenance of the Structural Integrity of Repaired and Nonrepaired Aging Engine Stationary Components,” GE AIRCRAFT ENGINES CINCINNATI OH1999.
11. Katayama · 1985 · 60
12. Precipitate evolution in the early stages of ageing in Inconel 718 investigated using small-angle x-ray scattering10.1016/j.msea.2014.06.036 ↗
13. Sims · 1987
14. A current TTT diagram for wrought alloy 71810.7449/1991/Superalloys_1991_325_335 ↗
15. Effect of composition on segregation microstructures and mechanical properties of cast alloy 718
16. Solidification of Nb-bearing superalloys: part II. Pseudoternary solidification surfaces10.1007/s11661-998-0320-x ↗
17. Lippold · 2011
18. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
19. Investigation of laser metal deposited Alloy 718 onto an EN 1.4401 stainless steel substrate10.1016/j.optlastec.2017.05.038 ↗