Rapid preparation of micro/nano porous Cu/Cu2O particles through dealloying of powder sintered Cu-Al alloy
Source abstract
Abstract
Three-dimensional (3D) continuous micro/nano porous Cu/Cu 2 O (MNPC) particles that were difficult to obtain before were prepared. With the combination of rapid powder sintering and dealloying, when Al element is corroded, the particles can control the corrosion intensity through self shedding, to obtain bimodal pore size micron particles. The composition calculation and nano-ligament structure showed that C17A with eutectic point composition and particle morphology is conducive to obtaining complete microparticles. Complete particles with micropores for material exchange and nanopores for pollutant degradation will greatly improve the degradation rate. Therefore, in the dark ultrasonic environment, the addition of 120 °C oxidation for one hour of MNPC will increase the degradation efficiency of MO from 1.4% to 86% within 10 min.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanoporous metals and alloys · Copper-based nanomaterials and applications · Nanomaterials for catalytic reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Enhanced degradation of azo dye by nanoporous-copper-decorated Mg-Cu-Y metallic glass powder through dealloying pretreatment10.1016/j.apsusc.2014.03.069 ↗
2. Fabrication and characterization of bulk nanoporous copper by dealloying Al-Cu alloy slices10.1016/j.corsci.2014.10.014 ↗
3. Dealloying behavior of Mn-30 Cu alloy in acetic acid solution10.1016/j.corsci.2013.06.008 ↗
4. Hierarchically porous CuAg via 3D printing/dealloying for tunable CO2 reduction to syngas10.1021/acsami.1c10564 ↗
5. Fabrication and degradation properties of nanoporous copper with tunable pores by dealloying amorphous Ti-Cu alloys with minor Co addition10.1007/s11665-021-05491-z ↗
6. Fabrication of nanoporous silver film by dealloying Ag/α-Fe2O3 nanocomposite for surface-enhanced Raman spectroscopy10.1016/j.snb.2019.01.114 ↗
7. Dealloying induced nanoporosity evolution of less noble metals in Mg ion batteries10.1016/j.jma.2021.04.003 ↗
8. Dendritic core-shell nickel-iron-copper metal/metal oxide electrode for efficient electrocatalytic water oxidation10.1038/s41467-017-02429-9 ↗
9. Time-dependent power law function for the post-dealloying chemical coarsening of nanoporous gold derived using small-angle X-ray scattering10.1016/j.scriptamat.2021.114215 ↗
10. Hierarchically porous LiMn0.1Fe0.9PO4@C microspherical cathode materials prepared by a facile template-free hydrothermal method for high-performance lithium-ion batteries10.1016/j.jallcom.2020.157825 ↗
11. Fabrication of high surface area microporous ZnO from ZnO/carbon sacrificial composite monolith template10.3390/mi13020335 ↗
12. Nanostructured copper/copper oxide hybrids: combined experimental and theoretical studies10.1039/C6CP03096C ↗
13. Structural and magnetic properties of FexCu1-x sputtered thin films electrochemically treated to create nanoporosity for high-surface-area magnetic components10.1021/acsanm.8b00143 ↗
14. Effect of heat treatment on the microstructure and performance of Cu nanofoams processed by dealloying10.3390/ma14102691 ↗
15. Transition from homogeneous to localized deformation in nanoporous gold
16. Magical oxygen: tuning Cu&Ag nanoporous membrane into nanoporous (Cu&Ag)@Ag core-shell alloy10.1016/j.physb.2021.413011 ↗
17. Record activity and stability of dealloyed bimetallic catalysts for proton exchange membrane fuel cells10.1039/C4EE02144D ↗
18. Identifying electrocatalytic sites of the nanoporous copper-ruthenium alloy for hydrogen evolution reaction in alkaline electrolyte10.1021/acsenergylett.9b02374 ↗
19. Designing multiscale porous metal by simple dealloying with 3D morphological evolution mechanism revealed via X-ray nano-tomography10.1021/acsami.9b16392 ↗
20. Three-dimensional hierarchical nanoporous copper via direct ink writing and dealloying10.1016/j.scriptamat.2019.10.013 ↗
21. Visible light driven heterojunction photocatalyst of CuO-Cu2O thin films for photocatalytic degradation of organic pollutants10.3390/nano9071011 ↗
22. Facile fabrication of ultrathin freestanding nanoporous Cu and Cu-Ag films with high SERS sensitivity by dealloying Mg-Cu(Ag)-Gd metallic glasses10.1016/j.jmst.2020.08.049 ↗
23. Formation mechanism and characterization of immiscible nanoporous binary Cu-Ag alloys with excellent surface-enhanced Raman scattering performance by chemical dealloying of glassy precursors10.1039/C9QI01521C ↗
24. An in vitro evaluation of the hierarchical micro/nanoporous structure of a Ti3Zr2Sn3Mo25Nb alloy after surface dealloying10.1021/acsami.1c02140 ↗
25. Robust bulk micro-nano hierarchical copper structures possessing exceptional bactericidal efficacy10.1016/j.biomaterials.2021.121271 ↗
26. A review of catalytic performance of metallic glasses in wastewater treatment: recent progress and prospects10.1016/j.pmatsci.2019.100576 ↗
27. A novel WO3 sonocatalyst for treatment of rhodamine B under ultrasonic irradiation10.1007/s11356-017-1086-8 ↗
28. Green synthesis of zinc oxide and copper oxide nanoparticles using aqueous extract of oak fruit hull (Jaft) and comparing their photocatalytic degradation of basic violet 310.1007/s41742-018-0064-4 ↗
29. Sonophotocatalytic degradation mechanisms of rhodamine B dye via radicals generation by micro and nano-particles of ZnO10.1016/j.apcatb.2018.10.078 ↗
30. Cuprous oxide (Cu2O) crystals with tailored architectures: a comprehensive review on synthesis, fundamental properties, functional modifications and applications10.1016/j.pmatsci.2018.03.006 ↗
31. Facet-selective growth of Cu–Cu2O heterogeneous architectures10.1039/C1CE05743J ↗
32. Mechanism insight into an unprecedented dual series-parallel photocharge separation in quaternary Cu2O facet junctions10.1002/adfm.202111528 ↗
33. Recent advances in hybrid Cu2O-based heterogeneous nanostructures10.1039/C5NR02178B ↗
34. Spatial charge separation and high-index facet dependence in polyhedral Cu2O type-II surface heterojunctions for photocatalytic activity enhancement10.1039/D1QI00031D ↗
35. Tuning interfacial Cu-O atomic structures for enhanced catalytic applications10.1002/asia.201900756 ↗
36. Nanoporous core-shell Cu@Cu2O nanocomposites with superior photocatalytic properties towards the degradation of methyl orange10.1039/c2ra21821f ↗
37. High-strength hierarchical-structured bulk nanoporous Cu prepared by dealloying and spark plasma sintering10.1016/j.scriptamat.2021.114114 ↗
38. Degradation performance and mechanism toward methyl orange via nanoporous copper powders fabricated by dealloying of ZrCuNiAl metallic glassy precursors10.1088/1361-6528/ac3bec ↗
39. Scalable fabrication of high activity nanoporous copper powders for electrochemical CO2 reduction via ball milling and dealloying10.1016/j.jcou.2021.101454 ↗
40. Tailored products of dealloying as-sintered Al-Cu alloys in sodium hydroxide solutions10.1039/C5RA12112D ↗
41. Fabrication of highly porous CuAl intermetallic by thermal explosion using nacl space holder10.1007/s11837-018-3035-5 ↗
42. Composition origin of Cu-Zr bulk metallic glasses understood via a “dual-cluster” model of binary eutectics10.1016/j.jnoncrysol.2022.121635 ↗
43. Dealloying solution dependence of fabrication, microstructure and porosity of hierarchical structured nanoporous copper ribbons10.1016/j.corsci.2015.01.043 ↗
44. Review on the treatment of organic pollutants in water by ultrasonic technology10.1016/j.ultsonch.2019.01.017 ↗
45. Enhanced decolorization of methyl orange using zero-valent copper nanoparticles under assistance of hydrodynamic cavitation10.1016/j.ultsonch.2014.05.025 ↗
46. Studies on the substrate-dependent photocatalytic properties of Cu2O heterojunctions10.1039/D0RA10681J ↗
47. One-pot construction of highly efficient TaON/Bi2O3/S-BiOCl ternary photocatalysts: simultaneously integrating type-I with Z-scheme junctions for improved visible light-driven removal of organic pollutants10.1016/j.chemosphere.2022.135979 ↗
48. One-pot integration of S-doped BiOCl and ZnO into type-II photocatalysts: simultaneously boosting bulk and surface charge separation for enhanced antibiotic removal10.1016/j.seppur.2022.121725 ↗