journal article·2009-01

Purification of Cu by hydrogen plasma-arc zone melting and characterization of trace impurities by secondary ion mass spectrometry

G.M. Lalev, J.-W. Lim, N.R. Munirathnam, G.-S. Choi, M. Uchikoshi, K. Mimura, M. Isshiki

Materials Characterization· Volume 60· Issue 1
Publisher page

Abstract

Abstract Purification of 4N (99.99%) and 6N (99.9999%) purity Cu rods by hydrogen plasma-arc zone melting was carried out. Weight loss in the 4N and 6N Cu rods as a function of number of zone refined passes revealed a higher rate of impurity removal by vaporization in 4N Cu when compared to 6N Cu. Purification effect was studied by analyzing major impurities like Mg, Si, Ca, Ti, Cr, Ni and Fe by O 2 + ions and C, O, As, Cl, P and S by Cs + ion sources using secondary ion mass spectrometry. A remarkable decrease of Si, Ti and Fe impurity concentrations in Cu at x / L = 0.03 after 10 zone passes was observed, but no similar purification effect along the remaining length of the zone refined copper rod was observed. Mg, Se and Ca in the Cu rods were reduced faster by a high evaporation effect due to P i / P Cu > 10 2 . On the other hand, removal of O, C, S and Se was expectedly dominated by vaporization in the form of H 2 O, CH 4, H 2 S, and H 2 Se through thermodynamically favored reactions. The overall segregation rate of the individual impurity elements was decreased with an increase in the purity from 4N to 6N of Cu rods. SIMS analysis of trace impurities was successfully carried out on HPZM Cu for quantitative estimation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Fusion materials and technologies · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Advanced multilayer metallization schemes with copper as interconnection metal10.1016/0040-6090(93)90680-N ↗
2. Ultra high purification of copper chloride solutions by anion exchange10.1016/S0304-386X(96)00091-6 ↗
3. Electromigration in vacuum evaporated Cu films10.1016/0169-4332(93)90594-2 ↗
4. Enthalpy, heat of fusion and specific electrical resistivity of pure silver, pure copper and the binary Ag–28Cu alloy10.1016/j.tca.2005.08.014 ↗
5. Recommended values for the thermal conductivity of aluminum of different purities in the cryogenic to room temperature range, and a comparison with copper10.1016/j.cryogenics.2005.06.008 ↗
6. Mechanical behavior of nanocrystalline copper10.1016/j.msea.2006.07.165 ↗
7. Initial oxidation kinetics of copper (110) film investigated by in situ UHV-TEM10.1016/S0039-6028(03)00539-9 ↗
8. Copper purification by anion-exchange separation in chloride media10.2320/matertrans1989.38.1083 ↗
9. Effect of floating zone refining under reduced hydrogen pressure on copper purification10.2320/matertrans.43.2802 ↗
10. Refining of the copper and investment casting10.1016/0924-0136(95)02007-9 ↗
11. Decarburization and denitrogenization of iron and iron–chromium alloys by plasma jet of hydrogen–argon gas mixture10.2355/tetsutohagane1955.62.1_43 ↗
12. Refining of some refractory metals by H2–Ar plasma arc melting
13. Removal of alloying elements from zirconium alloys by hydrogen plasma-arc melting10.1016/0925-8388(94)01470-1 ↗
14. Refining effect of hydrogen plasma arc melting on hafnium metal10.1016/j.matlet.2006.01.061 ↗
15. Inorganic trace analysis by mass spectrometry10.1016/S0584-8547(98)00110-4 ↗
16. Quantification in trace and ultratrace analyses using glow discharge techniques: round robin test on pure copper materials10.1039/b300025g ↗
17. Purification of chromium by hydrogen plasma-arc zone melting10.1016/j.msea.2005.03.113 ↗
18. Systematic study and periodic dependence of equilibrium distribution coefficients of admixtures on the atomic number of admixtures and their importance for crystallization10.1016/0921-5093(93)90190-P ↗
19. Chase · 1982